Home Styles 5516-06 User Manual
88 5516 06
Barnside
TV Console
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 Pc.
B.
Side Frame
1 Pc.
C.
Side Frame
1 Pc.
E.
Divider
1 Pc.
D.
Front Rail
1 Pc.
F.
Back Stretcher
1 Pc.
G.
Shelf
2 Pcs.
H.
Drawer
2 Pcs.
(Knock-Down Construction, please refer to the last page
of instructions for steps to complete assembly)
Hardware List
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Cam Lock Screw
18 Pcs.(+1 extra)
Cam Lock
18 Pcs.(+4 extra)
Wood Screw (long)
for Side Drawer
16 Pcs.(+1 extra)
Head Cap Bolt
8 Pcs.(+1 extra)
Wood Screw (short)
for Bottom Drawer
12 Pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Leve
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Machine Screw
4 Pcs.
Pull Handle
2 Pcs.
l
Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly, item must be level to work properly.
Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws
into the pre-drilled holes
of Top (A) and
Side Frames (B) and (C).
(see Figure 1)
B
B
Cam Lock Screw
B
A
C
2
/4
Figure 1
B
D
B
E
B
F
B
C
STEP 2
Attach Front Rail (D) and Back Stretcher (F) to Divider (E)
with Cam Locks. (see Figure 2)
Attach Side Frame (C) to unit with Cam Locks.
Figure 2
Loading...