88 5411 65
Cabin Creek
Baker’s Rack
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 Pc.
B.
Side Frame
1 Pc.
C.
Side Frame
1 Pc.
Hardware List
D.
Back Frame
1 Pc.
Head Cap Bolt
28 pcs. (+1 extra)
E.
Back Frame
1 Pc.
Head Cap Bolt (long)
2 pcs. (+1 extra)
Spring Washer
30 pcs. (+1 extra)
F.
Rail
1 Pc.
G.
Shelf
2 Pcs.
Flat Washer
30 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Head Cap Bolt
(for connecter)
4 pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Wood Screw (long)
8 Pcs. (+1 extra)
Wood Screw (short)
4 Pcs. (+1 extra)
Steel Plate Connecter
2 Pcs. (+1 extra)
Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
B
B
C
B
E
F
B
D
2
/3
Head Cap Bolt
Spring Washer
Flat Washer
STEP 1
Attach Rails (F) and Back Frame (E) to Side Frame (C)
with Head Cap Bolts, Spring Washers and Flat Washers.
(see Figure 1)
Attach Back Frame (D) to unit with Head Cap Bolts,
Spring Washers and Flat Washers.
Figure 1
B
G
B
G
STEP 2
Attach Shelves (G) to unit
with Head Cap Bolts, Spring Washers and Flat Washers.
B
B
Assembly Instructions
Attach Side Frame (B) with
Head Cap Bolts, Spring Washers
and Flat Washers.
3
/3
STEP 3
STEP 4
Pleace Top (A) upside down on a soft cloth.
Attach unit from Step 1 to Top (A) with
Head Cap Bolts (long), Spring Washers,
Flat Washers and Wood Screws (long).
Head Cap Bolt (long)
Wood Screw
(long)
Head Cap Bolt
(for connecter)
Wood Screw
(short)
STEP 5
Pleace the unit onto the Buffet.
Attach Steel Plate Connecters to unit
with Head Cap Bolts (for connecter)
and Wood Screws (short).
Loading...