
88 5411 61
Cabin Creek Buffet
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 Pc.
C.
Rail
2 Pcs.
D.
Shelf
1 Pc.
Hardware List
B.
Side Frame
2 Pcs.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Head Cap Bolt
28 pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Spring Washer
28 pcs. (+1 extra)
Flat Washer
28 pcs. (+1 extra)
Drawer Stop
2 pc.
Wood Screw
2 pc.
Tools recommended for assembly : Level

Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
B
C
B
B
B
C
2
/3
B
D
Flat Washer
Spring Washer
Head Cap Bolt
STEP 1
Attach Rails (C) and Shelf (D) to Side Frame (B)
with Head Cap Bolts, Spring Washers and Flat Washers.
(see Figure 1)
Attach Side Frame (B) to unit with Head Cap Bolts,
Spring Washers and Flat Washers.
Figure 1
B
B
B
A
STEP 2
Remove the drawers,
then place Cabinet (A)
upside down on a soft cloth.

STEP 3
Attach unit from Step 1 to
Top (A) with Head Cap Bolts,
Spring Washers and
Flat Washers.
Assembly Instructions
3
/3
Head Cap Bolt
Spring Washer
Flat Washer
B
A
STEP 4
Turn the unit to its’ upright position.
Attach Drawer Stops with
Wood Screws into the pre-drilled holes
inside the opening of the unit.
(see Figure 2)
Wood Screw
Drawer Stop
Figure 2
Figure 3
Remove the Pull Handles that are
installed on the inside of the drawers
and re-install them on the outside of
the drawer. (see Figure 3)
Slide the drawers into position.
To the level the unit, adjust
the adjustable levelers on the
bottom of the legs. (See fi gure 4)
Figure 4