Home Styles 5216-95 User Manual
88 5216 95
Solid Wood Top
Kitchen Cart
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
E.
Back Rail
1 pc.
F.
Divider
1 pc.
Hardware List
B.
Side Frame
1 pc.
G.
Base
1 pc.
(Please refer to the last page of these
instructions for drawer assembly.)
C.
Side Frame
1 pc.
I.
Drawer
2 pcs.
D.
Front Rail
2 pcs.
H.
Shelf
1 pc.
J.
Side Bar
1 pc.
M4x16
Wood Screw (short)
12 pcs. (+1 extra)
M4x25
Wood Screw (long)
16 pcs. (+1 extra)
Caster
Two with lock and
Two non-locking
4 pcs.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
M6x25
Head Cap Bolt (short)
2 pcs. (+1 extra)
M6x40
Head Cap Bolt (long)
15 pcs. (+1 extra)
Cam Lock Screw
4 pcs. (+2 extra)
Cam Lock
4 pcs. (+4 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Wood Plug
13 pcs. (+1 extra)
Adjustable Pin
4 pcs. (+1 extra)
M4x25
Machine Screw
4 pcs.
Pull Handle
2 pcs.
Assembly Instruction 2 / 4
IMPORTANT
* Do not tighten up all the screws and bolts until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the fl oor.
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into the pre-drilled
holes of Top (A). (see Figure 1)
A
STEP 2
Attach Front Rails (D) and Back Rail (E) to Divider (F) with
Head Cap Bolts (long). (see Figure 2)
D
Head Cap Bolt (long)
F
D
E
Figure 1
B
Figure 2
Figure 3
Head Cap Bolt (long)
STEP 3
Attach Side Frames (B) and (C) to
the unit from Step 2 and Base (G)
with Head Cap Bolts (long).
Attach 4X Casters to unit with
locking casters at the front and
non-locking casters at the back.
(see Figure 3)
Locking Casters
Non-Locking Casters
G
C
Loading...