88 5094 941
Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Hardware List
Small
Hex Wrench
1 pc.
Head Cap Bolt
16 pcs. (+1 extra)
Hex Wrench
1 pc.
F.
Foot
4 pcs.
Flat Washer
4 pcs.(+1 extra)
Head Cap Bolt (long)
4 pcs. (+1 extra)
Adjustable Pin
4 pcs. (+2 extra)
Spring Washer
4 pcs.(+1 extra)
Cam Lock
4 pcs.(+1 extra)
Cam Lock Screw
4 pcs.(+1 extra)
A.
Top
1 pc.
Pull Handle
8 pcs.
Machine Screw
8 pcs.
For assembly see instructions in carton 88 5094 942
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Tools recommended for assembly :Level
88 5094 942
Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
H.
Door
2 pcs.
B.
Rail
2 pcs.
D.
Leg
2 pcs.
E.
Leg
2 pcs.
Door
2 pcs.
I.
L.
Stretcher
2 pcs.
Shelf
1 pc.
C.
Side Panel
2 pcs.
G1.
Shelf
2 pcs.
G2.
Shelf
J.
2 pcs.
K.
Base
1 pc.
Also need the following from carton 88 5094 941 :
Part List in carton 88 5094 941
Top (A)
Foot (F)
1 pc.
4 pcs.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Hardware List in carton 88 5094 941
Hex Wrench
Small Hex Wrench
Cam Lock Screw
Cam Lock
Head Cap Bolt
Head Cap Bolt (long)
Spring Washer
Flat Washer
Adjustable Pin
Pull Handle
Machine Screw
1 pc.
1 pc.
5 pcs.
5 pcs.
17 pcs.
5 pcs.
5 pcs.
5 pcs.
6 pcs.
8 pcs.
8 pcs.
Tools recommended for assembly :Level
Assembly Instructions 3/5
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
*You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
A
STEP 1
Remove the Drawer from Top (A).
Cam Lock Screw
C
Cam Lock
B
B
C
C
Figure 1
STEP 2
Put Cam Lock Screws into
the pre-drilled holes of
Side Panels (C) and tighten.
(see Figure 1)
Assemble Side Panel (C) and
Rail (B) using Cam Lock.
(see Figure 2)
Place the unit onto Top (A).
A
Figure 2
Assembly Instructions 4/5
STEP 3
Attach Rail (L) to Leg (D) and (E) with
Head Cap Bolts. (see Figure 3)
Attach Shelf (G1) and (G2) to unit
at the pre-drill holes of side panels, then.
attach the assembled legs to unit with
Head Cap Bolts.
Head Cap Bolt
E
G2
D
G1
G2
G1
E
D
L
L
E
E
D
Figure 3
Head Cap Bolt
D
STEP 4
Attach Base (K) to unit with
Head Cap Bolts.
Head Cap Bolt
K
STEP 5
Attach Feet (F) to Base (K)
with Head Cap Bolts,
Spring Washers
and Flat Washers. (see Figure 4)
Head Cap Bolt
Spring Washer
Flat Washer
Assembly Instructions 5/5
F
F
Figure 4
Figure 5
F
Flat Washer
Spring Washer
Head Cap Bolt
Machine Screw
Pull Handle
K
F
STEP 6
Attach Doors (H) and (I) by sliding the door lift hinges into the side panel lift hinges. (see Figure 5)
Assemble Pull Handles to Doors (H), (I) and Drawer
see Figure 6
(see Figure 7)
H
with Machine Screws. ( )
Slide Drawer into place.
Insert Adjustable Pins into side panels
at the desired level.
Place Shelf (J) into position.
J
I
To level the unit, adjust the adjustable
levelers on the bottom of unit.
Adjustable Pin
Figure 7
Loading...