88508995 C
Solid Wood Top Kitchen Cart
with Wood Breakfast Bar
Dear Our Valuable Customers,
Please follow our assembly instructions in every step,
we guarantee that you will get the perfect merchandise.
Thank you so much for purchasing our quality products.
Casual Attire For Today's Home
PART LIST
A.
Top
1 pc.
Side Frame L.
1 pc.
I.
Back Stretcher
1 pc.
N.
KD. Drawer
3 pcs.
(For Drawer N&O packed in separate carton
with hardware and assembly instructions.)
J.
Front Stretcher
1 pc.
O.
KD. Drawer
1 pc.
Thai Patent Pending Numbers 077214
D.
Middle
Frame L.
1 pc.
B.
C.
Side Frame R.
1 pc.
K.
Front Rail
3 pcs.
P.
Shelf
2 pcs.
T.
Brush Chrome Pipes
3 pcs.
L.
Base
1 pc.
Side Rack
U.
Handle Arm
2 pcs.
1 pc.
E.
Middle
Frame R.
1 pc.
Q.
F.
Back Panel
3 pcs.
Round Arm
1 pc.
R.
Side Rack
1 pc.
V.
G.
Back Post
2 pcs.
W.
Door
1 pc.
H.
Front Post
2 pcs.
M.
Gate Leg
1 pc.
S.
Base Rack
1 pc.
X.
Door
1 pc.
HARDWARE LIST
Head Cap Bolt
14 pcs. (+1 Extra)
Caster
2 with lock and
2 without lock
4 pcs.
Tools Required For Assembly : Philips screwdriver
Hex Wrench
1 pc.
Cam Lock Screw
4 pcs. (+1 Extra)
Cam Lock
4 pcs. (+1 Extra)
Pull Handle
2 pcs.
Machine Screw
for Pull Handle
4 pcs.
Wood Screw
(for Caster & Gate Leg)
22 pcs. (+2 Extra)
Adjustable Pin
8 pcs. (+2 Extra)
Wood Plug
10 pcs.
(+2 Extra)
Assembly Instructions 2/4
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to
tighten up the Head Cap Bolts in the future.
STEP 1
Attach 4 Casters to the underside of the
Base (L), put the 2 Casters with
lock in front as you first need to lock the
cart from moving. (See sticker in the bottom indicating front side)
STEP 2
L
Attach the Back Post (G) and
Front Post (H) to the Middle Frame
(D) and (E).
Attach the assembled Middle Frame
(D) and (E) to the Base (L).
F
F
G
D
H
D
E
L
J
Front
F
STEP 3
Put the Front Rail (K) in between the
Middle Frame (D) and (E).
B
Front
K
K
D
Attach the Side Frame (B) to the
side of the unit with Head Cap Bolts.
Slide the Back Panels (F) into place.
K
E
STEP 4
Attach the Back and Front
Stretcher (I), (J) to the
assembled unit with Head Cap Bolts.
Assembly
I
J
Instructions
3/4
Attach the Side Frame (C) to the other side
of the unit with Head Cap Bolts.
STEP 5
Attach the Side Rack (Q) to the Side Frame (B)
Q
T
T
B
S
T
R
with the Head Cap Bolts.
Attach the Brush Chrome Pipes (T) to the pre-drilled
holes of Side Rack (Q).
Attach the Base Rack (S) to the Side Rack (Q).
Attach the Side Rack (R) to the Side Frame (B),
using Head Cap Bolts.
C
STEP 6
Attach the Handle Arm (U) to the
Side Frame (C) with Head Cap Bolts.
Slide the Round Arm (V) into place.
M
Adjust leveler to required height
C
U
V
U
STEP 7
Attach the Gate Leg (M) at the rear
and connect it to the unit with Wood Screws.
Holding Gate Leg
and rear frame
with Wood Screw
STEP 8
Turn the Top (A) upside down
and put the Cam Lock Screws
to the pre-drilled holes.
Assembly
Instructions
4/4
See the “Arrow”
on top
B
P
A
D
P
Cam Lock
Assembly
E
C
A
STEP 9
Place the Top (A) on the assembled unit.
Place the Cam Locks into the holes of the
Side Frames (B) and (C).
Make sure the Arrow sign on top. and tighten all
the Cam Locks as to secure the Top with
the body.
Insert the Adjustable Pins into the Side
Frame (B), Middle Frame (D) and Side
Frame (C), Middle Frame (E) at the
desired level.
Place Shelf (P) into place.
STEP 10
Attach the Pull Handles to the
Door (W) and (X) using the Machine Screws.
Attach the Door (W) and (X) to the
Side Frame (B) and (C), slide the door
lift hinges into the side frame lift hinges.
See Assembly Instructions for Drawers
in the separate carton.
Slide the Drawers (N) and (O) into place.
W
STEP 11
Cover all holes with
Wood Plugs
B
Lift hinge
Assembly
N
O
N
N
Pull Handle
Assembly
C
X
88508995 C
Drawer (N)
Unit Part List
N1.
Front Part
1 pc. for each
drawer.
N2.
Back Part
1 pc. for each
drawer.
N3
(Fig)1
N2
N3.
Side Part (L.)
1 pc. for each
drawer.
N1
N4
MAKE SURE ROLLER
IS ON THE BACK
HARDWARE LIST
N4.
Side Part (R.)
1 pc. for each
drawer.
N5.
Base Part
1 pc. for each
drawer.
Assembly
Pull Handle
3 pcs.
Machine Screw
for Pull Handle
6 pcs.
Instructions
Wood Screw /”
(for Bottom Part)
18 pcs.(+1 Extra)
Wood Screw 1”
(for Side Part)
24 pcs.(+1 Extra)
(Fig) 1
Line up Side Parts (N3) and (N4)to the
Front Part (N1) and Back Part (N2). Be sure to
follow the ‘Arrow’ sign sticker on the parts.
Using a Phillip’s screwdriver, insert 1” screws
into each of the 4 pre-drilled holes on the side
of (N3) and (N4), then tighten half way.
1
2
(Fig) 2
Turn the assembled drawer over and slide the
Plywood Base Part (N5) into the grooves
on Side Parts (N3) and (N4). Be sure to push
the plywood all the way forward so it meets the
Front Part (N1).
N3
N1
N5
N4
N2
(Fig)3
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
(Fig) 3
Insert the remaining (6) 1/2” screws
into the pre-drilled holes in Base Part
(N5), then tighten all screws
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part(N1).
N3
N5
(Fig)2
N1
N4
(Fig)4
88508995 C
Drawer (O)
Unit Part List
O1.
Front Part
1 pc.
Side Part(L.)
O2.
Back Part
1 pc.
O3
(Fig)1
O2
(Fig) 2
Turn the assembled drawer over and slide the
Plywood Base Part (O5) into the grooves
on Side Parts (O3) and (O4). Be sure to push
the plywood all the way forward so it meets the
Front Part (O1).
O3.
1 pc.
O1
O4
MAKE SURE ROLLER
IS ON THE BACK
HARDWARE LIST
O4.
Side Part(R.)
1 pc.
O5.
Base Part
1 pc.
Assembly
Pull Handle
1 pc.
Machine Screw
for Pull Handle
2 pcs.
Instructions
Wood Screw /”
(for Bottom Part)
6 pcs.(+1 Extra)
Wood Screw 1”
(for Side Part)
8 pcs.(+1 Extra)
(Fig) 1
Line up Side Parts (O3) and (O4)to the
Front Part (O1) and Back Part (O2). Be sure to
follow the ‘Arrow’ sign sticker on the parts.
Using a Phillip’s screwdriver, insert 1” screws
into each of the 4 pre-drilled holes on the side
of (O3) and (O4), then tighten half way.
O1
O3
(Fig)2
O5
O4
1
2
O3
(Fig)3
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
O2
O1
O5
O4
(Fig) 3
Insert the remaining (6) 1/2” screws
into the pre-drilled holes in Base Part
(O5), then tighten all screws
(Fig)4
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part(O1).
Loading...