88 5061 95
The Orleans
Kitchen Cart
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Hardware List
A.
Top Unit
1 Pc.
D.
Shelf
2 Pcs.
B.
Leg
2 Pcs.
C.
Leg
2 Pcs.
Hex Wrench
1 Pc.
Caster
Two with lock and
Two without lock
4 pcs.
Small Hex Wrench
1 Pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Head Cap Bolt (short)
16 Pcs.(+1 extra)
Head Cap Bolt (long)
8 Pcs. (+1 extra)
Wood Screw
4 Pcs. (+1 extra)
Side Bar
2 Pcs.
Head Cap Bolt
for Side Bar
4 Pcs. (+1 extra)
Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
A
STEP 1
Remove the drawers, then place Top unit (A) upside down on a soft cloth.
2
/4
B
Wood Screw
C
B
A
Head Cap Bolt (long)
STEP 2
Attach Legs (B) and Legs (C) to Top Unit (A) with Wood Screws
and Head Cap Bolts (long).
C
Tighten all Bolts only half way with Hex Wrench.
(See fi gure 1)
Figure 1
STEP 3
Assembly Instructions
Head Cap Bolt (short)
D
D
3
/4
Attach Shelves (D) to unit from Step 2 with Head Cap Bolts (short).
Tighten all Bolts.
Locking Caster
Figure 2
Non-Locking Caster
STEP 4
Attach Casters underneath the legs of unit, with the Locking Casters to the front.
(See fi gure 2)
Assembly Instructions
4
/4
for Side Bar
STEP 5
Locking Caster
Turn the unit to its’ upright position.
Attach Side Bars to unit with Head Cap Bolts for Side Bar.
STEP 6
Remove the Knobs that are on the inside of the
drawers and attach to the outside of the drawers with
Machine Screws.
Side BarHead Cap Bolt
STEP 7
Slide drawers into position.
Loading...