88 5060 941
The Orleans Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top Unit
1 pc.
For assembly see instructions in carton 88 5060 942
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
88 5060 942
The Orleans Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List (in this carton)
B.
Apron Frame
1 pc.
D.
Shelf
1 pc.
Hardware List
Spring Washer
14 pcs. (+1 extra)
C.
Shelf
1 pc.
E.
Support
4 pcs.
Head Cap Bolt
14 pcs. (+1 extra)
F.
Leg
4 pcs.
Head Cap Bolt
(short)
28 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Flat Washer
14 pcs. (+1 extra)
Head Cap Bolt
(long)
4 pcs. (+1 extra)
Tools recommended for assembly :Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Assembly Instructions 2/3
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
*You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Head Cap Bolt (short)
F
STEP 1
Attach Leg (F) to the Shelf (C) and (D),
using Head Cap Bolts (short). (see Figure 1)
Tighten only halfway.
(Figure 1)
D
F
F
C
F
(Figure 2)
E
C
E
E
STEP 2
Attach Support (E) to the Shelf (C) with Head
Cap Bolts (long). (see Figure 2)
Head Cap Bolt (long)
E
Assembly Instructions 3/3
STEP 3
Place Top (A) upside down on a soft cloth.
Attach the Apron Frame (B) to Top (A)
with Flat Washers, Spring Washers and
Head Cap Bolts. (see Figure 3)
Head Cap Bolt
Spring Washer
Flat Washer
B
A
(Figure 3)
(Figure 4)
(Figure 5)
STEP 3
Attach the base unit on to Top unit
with Head Cap Bolts (short) and Flat
Washers, Spring Washers, Head Cap
Bolts. (see Figure 4), (see Figure 5)
Tighten all bolts completely.
Turn the unit over to its’ upright
position.
Head Cap Bolt (short)
Head Cap Bolt
Spring Washer
Flat Washer
To level the unit, adjust the adjustable
levelers on the bottom of unit. (see Figure 6)
Note: Unit must be level to work properly.
(Figure 6)
Loading...