Home Styles 5050-20 User Manual
88 5050 20
Modern Craftsman
End Table
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Cabinet
1 pc.
Hardware List
Hex Wrench
1 pc.
C.
Side Frame
2 pcs.
B.
Stretcher
2 pcs.
D.
Shelf
1 pc.
Spring Washer
8 pcs. (+1 extra )
Small
Hex Wrench
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
Head Cap Bolt
8 pcs. (+1 extra)
servicedesk@homestyles-furniture.com
Flat Washer
8 pcs. (+1 extra )
Wood Screw
4 pcs. (+1 extra)
Assembly Instructions 2/3
B
B
CCD
A
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
Flat Washer
Spring Washer
Head Cap Bolt
STEP 1
Assemble Stretchers (B),
Base (D) to Side Frame (C)
with Head Cap Bolts,
Spring Washers and Flat Washers.
(See figure 1)
Figure 1
STEP 2
Remove the drawer,
then place Cabinet (A)
upside down on a soft cloth.
Loading...