88 5033 942
Nantucket
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Kitchen Island
Part List
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
Patent 8,584,600 B2
H2.
Front Rail
1 pc.
I.
Back Stretcher
2 pcs.
K.
Back Panel
2 pcs.
Hardware List
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Side Panel
1 pc.
Adjustable Pin
20 pcs. (+1 extra)
D.
Shelf
4 pcs.
Shelf
1 pc.
Side Panel
1 pc.
L.
M.
P.
Base
1 pc.
Cam Lock
16 pcs.(+1 extra)
E.
S.
Plinth
2 pcs.
T.
Door
1 pc.
Pull Handle
2 pcs.
Side Panel
1 pc.
G.
Side Panel
F.
1 pc.
U.
Door
1 pc.
Pull Handle
2 pcs.
Head Cap Bolt
24 pcs. (+1 extra)
Wood Screw (long)
for Drawer Side Part
8 pcs. (+1 extra)
Wood Screw (short)
for Drawer Base Part
6 pcs. (+1 extra)
Wood Screw
for Hinge
27 pcs. (+2 extra)
Cam Lock Screw
16 pcs.(+1 extra)
Machine Screw
6 pcs.
For assembly see instructions in carton 88 5033 941
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Tools recommended for assembly :Level
Assembly Instructions 2/6
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
*You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Top (A1) to Top (A2) with
Wood Screws.
Put Cam Lock Screws into
the pre-drilled holes of Top (A1),
Side Panel (D), (E), (F), (G)
and tighten.
Wood Screw
A1
A2
Cam Lock Screw
A1
D
Cam Lock Screw
E
G
F
Assembly Instructions 3/6
STEP 2
Attach Side Panel (B) to Base (P) with
Head Cap Bolts.
Attach Side Panels (D) and (E) to
Base (P) with Head Cap Bolts.
(see Figure 1)
D
B
E
P
Head Cap Bolt
H2
STEP 3
H1
Attach Front Rail (H1) and
Front Rail (H2) to unit
I
K
J
Attach Back Stretcher (I) to unit using
K
I
Attach Stretcher (J) to unit then slide Back Panel (K)
Slide Back Panel (K) into Place.
using Cam Locks.
(see Figure 1)
Cam Locks.
into place.
Assembly Instructions 4/6
Cam Lock
F
STEP 4
Attach Side Panel (C) to Base (P)
with Head Cap Bolts.
Attach Side Panels (F) and (G) to
unit with Head Cap Bolts.
P
G
C
Head Cap Bolt
S
Q
Q
R
P
Head Cap Bolt
S
STEP 5
Attach Plinths (Q) to Base (P)
with Head Cap Bolts.
Attach Plinths (S) and Leg Support (R)
to unit with Head Cap Bolts.
Wood Screw
Assembly Instructions 5/6
Figure 1
O
N
STEP 6
Attach Back Support (N) and (O)
to unit with Wood Screws into
pre-drilled holes.
Cam Lock
A
L
V
L
L
Figure 2
L
M
T
U
STEP 7
Place Top (A) onto unit with Cam Locks.
Adjustable Pin
Attach Doors (T) and (U) by sliding the door lift hinges into the side panels lift hinges.
(see Figure 1)
Assemble Pull Handles to Doors (T) and (U) with Machine Screws.
(see Figure 2)
Insert Adjustable Pins into side panels at the desired level,
then place Shelves (L) and (M) into position.
Slide the Drawers (V) into position.
To level the unit, adjust the adjustable levelers on the bottom of unit. (see Figure 3)
(Figure 3)
Note: Unit must be level to work properly.
Drawer
Assembly Instructions 6/6
V3
(Figure 1)
V2
MAKE SURE ROLLER
IS ON THE BACK
STEP 2
Slide V5 into the grooves in V3
and V4. Be sure to push V5 all
the way forward to it meets V1.
(see Figure 2)
V3
V5
V1
V1
V4
V3
STEP 1
Attach V1 to V3 and V4, using
a andPhillips screwdriver
wood screws (4X),long
tighten halfway.
Attach V2 to V3 and V4 using
wood screws (4X),long
tighten halfway. (see Figure 1)
V1
(Figure 2)
V5
V4
V2
(Figure 3)
V2
STEP 3
Insert wood screws (6X)short
into the pre-drilled holes in V5,
tighten screws. (see Figure 3)
Part List
V1.
Front Part
1 pc.
V2.
Back Part
1 pc.
V4
Side Part
V3.
1 pc.
(Figure 4)
V4.
Side Part
1 pc.
STEP 4
Attach hardware pulls with
machine screws.
(see Figure 4)
Tighten all screws used in
drawer assembly.
V5.
Base Part
1 pc.
Loading...