Home Styles 5033-88 User Manual
88 5 8033 8
Nantucket
Bistro Stool
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Seat
1 pc.
E.
Side Stretcher
1 pc.
Side Stretcher
1 pc.
Hardware List
Small
Hex Wrench
1 pc.
B.
Leg
1 pc.
F.
Front Stretcher
Wood Screw
6 pcs.(+1 extra)
G.
1 pc.
Head Cap Bolt
(short)
1 pcs.(+1 extra)
C.
Leg
1 pc.
D.
Back Frame
.1 pc
Flat Washer
9 pcs.(+1 extra)
Key Wrench
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
Head Cap Bolt
(long)
4 pcs.(+1 extra)
servicedesk@homestyles-furniture.com
Head Cap Bolt
4 pcs.(+1 extra)
Spring Washer
9 pcs.(+1 extra)
Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor
Flat Washer
Spring Washer
Head Cap Bolt
Hex Wrench
G
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt Assembly
STEP 1
Attach Leg (B) and (C) to Seat (A)
with Flat Washers, Spring Washers and
Head Cap Bolts.
Tighten Head Cap Bolts only half way.
Attach Front Stretcher (G) to the unit
with Wood Screws.
Attach Side Stretcher (F) to Leg (C) and
Side Stretcher (E) to Leg (B) with Wood
Screws. (see Figure 1), (
(Legs Part)
See “Arrow” sticker
indicating front side)
Wood Screw
C
F
Arrow Sticker
E
B
A
Head Cap Bolt (short)
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt
(Short)
Hex Wrench
D
Figure 2
Wood Screw
Figure 1
STEP 2
Attach the Back Frame (D) to the
unit with Flat Washers, Spring Washers,
Head Cap Bolts (short),
Head Cap Bolts (long) and Wood Screws.
(see Figure 2), (see Figure 3)
Tighten up all Head Cap Bolts.
Flat
Washer
Spring
Washer
Head Cap Bolt
(long)
Figure 3
Loading...