88 5020 65
Monarch Pantry
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
B.
Front Rail
1 pc.
E.
Side Panel
1 pc.
K.
Bottom
1 pc.
C.
Front Rail
1 pc.
J.
Shelf
4 pcs.
D.
Side Panel
1 pc.
F.
Door
1 pc.
G.
Door
1 pc.
H.
Back Panel
2 pcs.
L.
Back Rail
4 pcs.
I.
Back Post
1 pc.
M.
Top
1 pc.
N.
Front Rail
1 pc.
O.
Side Panel
1 pc.
P.
Side Panel
1 pc.
Q.
Door
1 pc.
R.
Door
1 pc.
S.
Back Panel
2 pcs.
U.
Back Post
1 pc.
Hardware List
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Cam Lock Screw
21 pcs.(+1 extra)
Cam Lock A
18 pcs.(+1 extra)
Cam Lock B
3 pcs.(+1 extra)
Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Adjustable Pin
16 pcs. (+1 extra)
Wood Screw
for Back Panel
16 pcs. (+1 extra)
Machine Screw
4 pcs.
Head Cap Bolt
10 pcs. (+1 extra)
Knob
4 pcs.
Assembly Instructions 2/6
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
* Use a soft cloth between these parts and the floor.
Cam Lock Screw
B
A
C
D
N
E
O
P
Figure 1
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of
Top (A), Front Rail (B), (C), (N) and Side Panel (D), (E), (O), (P).
(see Figure 1)
L
Assembly Instructions 3/6
STEP 2
H
I
L
Cam Lock A
STEP 3
Attach Bottom to unit with Head Cap
Bolt. (see Figure 3)
H
E
Attach Back Rail (L) to Side Panel (E)
using a Cam Lock A. Attach Back
Post (I) to Back Rail (L). Slide Back
Panels (H) to the unit. Attach Back
Rail (L) to unit using a Cam Lock A.
(see Figure 2)
Cam Lock A
D
K
Attach Side Panel (D) to the unit with
Head Cap Bolt and Cam Locks A.
B
Cam Lock A
C
Head Cap Bolt
Figure 2
STEP 4
Attach Front Rail (B) and
(C) to the unit using Cam
Locks A and Cam Locks B.
Cam Lock B
Figure 3
STEP 5
Place Top (A) to unit with Head Cap Bolts.
L
O
S
U
Assembly Instructions 4/6
A
Head Cap Bolt
P
Cam Lock A
L
S
STEP 6
Attach Back Rail (L) to Side Panel (P)
using a Cam Lock A. Attach Back Post (U)
to Back Rail (L). Slide Back Panels (S)
to the unit. Attach Back Rail (L) to unit
using a Cam Lock A. Attach Side Panel (O)
to the unit using Cam Locks A.
N
Cam Lock A
STEP 7
Attach Front Rail (N) to the unit using
Cam Locks A.
M
Assembly Instructions 5/6
Head Cap Bolt
STEP 8
Place Top (M) to unit with Head Cap Bolts.
Cam Lock A
STEP 9
Attach unit from Step 8 to unit from Step 5 using
Cam Locks A.
STEP 10
Assembly Instructions 6/6
Insert Adjustable Pins into side panels at desired location.
Place Shelves (J) into position.
Attach Doors (F), (G), (Q) and (R) to the side panels
by sliding the door lift hinges into the side panel lift hinges.
(see Figure 4)
Assemble Pull Handles to Door (F), (G), (Q) and (R)
with Machine Screws. (see Figure 5)
Adjustable Pin
Q
F
J
J
OR
J
G
J
Figure 4
Wood Screw
for Back Panel
Figure 5
STEP 11
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(see Figure 7)
Insert 16X Wood Screws from
the back of the unit. (see Figure 6)
Note: Please make sure unit is
level before tightening these
screws.
Figure 6
Figure 7
Loading...