Home Styles 5018-95 User Manual

88 5018 951
The Vintage Kitchen Cart
IMPORTANT NOTE
Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
Part List
A. Top
1 pc.
B. Top
1 pc.
C. Bottom
1 pc.
D. Back Panel
2 pcs.
F. Box Frame
2 pcs.
G. Box Top
1 pc.
H. Box Bottom
1 pc.
K. Bottle Rack
2 pcs.
I. Box Side
2 pcs.
J. Divider
1 pc.
L. Tray
2 pcs.
E. Shelf
1 pc.
M. Door
1 pc.
N. Door
1 pc.
For assembly see instructions in carton 88 5018 952
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
88 5018 952
The Vintage Kitchen Cart
IMPORTANT NOTE
Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
Part List
Q. Front Rail
1 pc.
W. Drawer
1 pc.
O. Side Panel
1 pc.
T. Back Rail
1 pc.
Hardware List
Small Hex Wrench
1 pc.
Caster two lock two non-lock
4 pcs.
Hex Wrench
1 pc.
Cam Lock Screw
22 pcs.(+1 extra)
Wood Screw for Caster
16 pcs. (+1 extra)
P. Side Panel
1 pc.
U. Back Rail
1 pc.
Cam Lock
22 pcs.(+1 extra)
Wood Screw (short) for Drawer Base Part
20 pcs. (+1 extra)
R. Front Rail
1 pc.
S. Runner
2 pcs.
Head Cap Bolt (short)
6 pcs. (+1 extra)
V. Back Rail
1 pc.
Head Cap Bolt (long)
4 pcs. (+1 extra)
Adjustable Pin
4 pcs. (+1 extra)
Wood Screw (long) for Drawer Side Part
32 pcs. (+2 extra)
X. Drawer
1 pc.
Y. Drawer
2 pcs.
(Knock-Down Construction, please refer
to the last page of these instructions for drawer assembly steps)
Cross Dowel
4 pcs. (+1 extra)
Machine Screw
12 pcs.
Hinge
4 pcs.
Wood Screw for Hinge
16 pcs. (+1 extra)
Pull Handle (short)
4 pcs.
Pull Handle (long)
2 pcs.
Also need Part in carton 88 5018 951
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Assembly Instructions 2/8
IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. * Use a soft cloth between these parts and the floor.
Cam Lock Screw
B
O
STEP 1
P
Insert Cam Lock Screws into
the pre-drilled holes of Top (B), Side Panels (O), (P) and Box Frame (F). (see Figure 1)
F
Casters (lock)
Casters (non-lock)
C
Figure 1
Figure 2
Wood Screw for Caster
STEP 2
Attach Casters to Bottom (C) with Wood Screws for Caster. (see Figure 2)
S
Assembly Instructions 3/8
Cam Lock
Q
D
R
D
V
U
J
T
S
P
STEP 3
Attach Back Rail (T), (U) and (V) to Side Panel (P) using Cam Locks (see Figure 3), then slide Back Panels (D) into place.
Attach Front Rail (Q), (R) to the unit using Cam Locks.
Attach Divider (J) and Runners (S) to unit using Cam Locks.
STEP 4
Attach Side Panel (O) to the unit using Cam Locks.
Attach bottom unit to unit with Head Cap Bolts (long) and Cross Dowels. (see Figure 4)
Figure 4Figure 3
Cam Lock
O
Head Cap Bolt (long)
Cross Dowel
Cam Lock
Assembly Instructions 4/8
I
Head Cap Bolt (short)
STEP 5
Attach Box Bottom (H) to Top (B) with Head Cap Bolts (short). (see Figure 5)
Attach Box Frames (F) and Box Sides (I) to top unit using Cam Locks.
F
I
F
H
B
A
Head Cap Bolt (short)
Figure 5
G
STEP 6
Attach Top (A) to top unit with Head Cap Bolts (short).
Place Box Top (G) onto box unit.
Wood Screw for Hinge
Hinge
Assembly Instructions 5/8
STEP 7
Attach Hinges to Door (M), (N) with Wood Screws for Hinge. (see Figure 6)
M
Figure 6
Figure 7
STEP 8
Slide Trays (L) into position.
Figure 8
N
Figure 9
Place top unit onto unit using Cam Locks.
Attach Door (M) and (N) to unit with Wood Screws for Hinge. (see Figure 7)
Assemble Pull Handles to Doors (M) and (N) with Machine Screws. (see Figure 8)
Insert Adjustable Pins into side panels.
Place Shelf (E) into position.
Slide Bottle Racks (K) down onto side panels. (see Figure 9)
Slide Drawers (W), (X) and (Y) into position.
K
Adjustable Pin
L
E
M
W
Y
Y
X
N
Wood Screw for Hinge
Cam Lock
L
K
Drawer (W)
Assembly Instructions 6/8
W3
W2
STEP 1
Attach W1 to W3 and W4, using a and
Phillips screwdriver
wood screws ,
long tighten halfway.
Attach W2 to W3 and W4 using
wood screws ,
long tighten halfway. (see Figure 1)
Figure 1
(4X)
(4X)
W3
W5
W1
W4
MAKE SURE ROLLER IS ON THE BACK
W1
N3
W1
W3
W5
W4
W2
Figure 2
STEP 2
Slide W5 into the grooves in W3 and W4. Be sure to push W5 all the way forward so it meets W1. (see Figure 2)
W2
STEP 3
Figure 3
Insert wood screws (4X) into the pre-drilled holes in W5 and tighten. (see Figure 3)
short
Part List
W1. Front Part
1 pc.
W2. Back Part
1 pc.
W4
STEP 4
Assemble Pull Handle with machine screws. (see Figure 4)
Tighten all screws used in drawer assembly.
W3. Side Part
1 pc.
W4. Side Part
1 pc.
W5. Base Part
1 pc.
Figure 4
Drawer (X)
Assembly Instructions 7/8
X3
X2
STEP 1
Attach X1 to X3 and X4, using a and
Phillips screwdriver
wood screws ,
long tighten halfway.
Attach X2 to X3 and X4 using
wood screws ,
long tighten halfway. (see Figure 1)
Figure 1
(4X)
(4X)
X3
X5
X1
X4
MAKE SURE ROLLER IS ON THE BACK
X1
N3
X1
X3
X5
X4
X2
Figure 2
STEP 2
Slide X5 into the grooves in X3 and X4. Be sure to push X5 all the way forward so it meets X1. (see Figure 2)
X2
STEP 3
Insert wood screws (4X) into the pre-drilled holes in X5 and tighten. (see Figure 3)
short
Part List
X1. Front Part
1 pc.
X2. Back Part
1 pc.
X4
Figure 3
STEP 4
Assemble Pull Handle with machine screws. (see Figure 4)
Tighten all screws used in drawer assembly.
X3. Side Part
1 pc.
X4. Side Part
1 pc.
X5. Base Part
1 pc.
Figure 4
Drawer (Y)
Y3
Assembly Instructions 8/8
Y1
Y2
STEP 1
Attach Y1 to Y3 and Y4, using a and
Phillips screwdriver
wood screws ,
long tighten halfway.
Attach Y2 to Y3 and Y4 using
wood screws ,
long tighten halfway. (see Figure 1)
Figure 1
(4X)
(4X)
Y3
Y5
Y2
N3
Y4
MAKE SURE ROLLER IS ON THE BACK
Y1
Y4
Y3
Y1
Y5
Y4
Y2
Figure 2
STEP 2
Slide Y5 into the grooves in Y3 and Y4. Be sure to push Y5 all the way forward so it meets Y1. (see Figure 2)
STEP 3
Insert wood screws (6X) into the pre-drilled holes in Y5 and tighten. (see Figure 3)
short
Part List
Y1. Front Part
2 pcs.
Figure 3
Y2. Back Part
2 pcs.
STEP 4
Assemble Pull Handle with machine screws. (see Figure 4)
Tighten all screws used in drawer assembly.
Y3. Side Part
2 pcs.
Y4. Side Part
2 pcs.
Y5. Base Part
2 pcs.
Figure 4
Loading...