Home Styles 5012-948 User Manual
88 5012 88
Grand Torino
Counter Stool
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Seat
1 pc.
B.
Side Stretcher
1 pc.
C.
Side Stretcher
1 pc.
D.
Side Stretcher
1 pc.
Hardware List
Key Wrench
1 pc.
Small
Hex Wrench
1 pc.
E.
Leg
1 pc.
Wood Screw
6 pcs.(+1 extra)
Head Cap Bolt
(long)
4 pcs.(+1 extra)
F.
Leg
1 pc.
Head Cap Bolt
(short)
3 pcs.(+1 extra)
Head Cap Bolt
4 pcs.(+1 extra)
G.
Back Frame
.1 pc
Flat Washer
11 pcs.(+1 extra)
Spring Washer
11 pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
F
Wood Screw
B
Flat Washer
Spring Washer
Head Cap Bolt
STEP 1
Attach Leg (F) and (E) to Seat (A) with Flat
Washers , Spring Washers and Head Cap
Bolts. Tighten Head Cap Bolts only half
way. (see Figure 1)
A
Attach Front Stretcher (B) to the unit with
Wood Screws. (see Figure 2)
E
Figure 1
Figure 4
STEP 2
Attach Side Stretcher (D) to Leg (F) and Side
Stretcher (C) to Leg (E) with Wood Screws. (see Figure 2)
Attach the Back Frame (G) to the unit with Flat
Washers , Spring Washers ,Head Cap Bolts (long) (see Figure 3) ,
Head Cap Bolts (short) and Wood Screws. (see Figure 4)
Figure 2
Flat Washer
Spring Washer
Head Cap Bolt
(long)
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
(short)
Figure 3
D
C
G
Loading...