88 5004 941
Kitchen Island Combo
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top Unit
1 pc.
For assembly see instructions in carton 88 5004 943
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Revised date : 4Feb2013
88 5004 942
Kitchen Island Combo
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List (in this carton)
B.
Top
1 pc.
C.
Back Stretcher
2 pcs.
F.
Rail
2 pcs.
G.
Shelf
4 pcs.
Hardware List
Small
Hex Wrench
1 pc.
H.
Base
1 pc.
Hex Wrench
1 pc.
D.
Back Stretcher
1 pc.
Cam Lock
4 pcs.(+1 extra)
E.
Middle Panel
1 pc.
N.
Back Panel
2 pcs.
Machine Screw
4 pcs.
Drawer
Adjustable Pin
32 pcs. (+1 extra)
Head Cap Bolt
18 pcs. (+1 extra)
Wood Screw
9 pcs. (+1 extra)
Cam Lock Screw
4 pcs.(+1 extra)
Pull Handle
4 pcs.
For assembly see instructions in carton 88 5004 943
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
88 5004 943
Kitchen Island Combo
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List (in this carton)
I.
Leg
1 pc.
Side Panel
M.
2 pcs.
J.
Leg
1 pc.
O.
Shelf
4 pcs.
K.
Leg
1 pc.
Door
1 pc.
P.
L.
Leg
1 pc.
Q.
Door
1 pc.
Also need the following from carton 88 5004 941, 88 5004 942
Part List in carton 88 5004 941
Top Unit (A)
Part List in carton 88 5004 942
Top (B)
Back Stretcher (C)
Back Stretcher (D)
Middle Panel (E)
Rail (F)
Shelf (G)
Base (H)
Back Panel (N)
1 pc.
1 pc.
2 pcs.
1 pc.
1 pc.
2 pcs.
4 pcs.
1 pc.
2 pcs.
Hardware List in carton 88 5002 942
Hex Wrench
Small Hex Wrench
Cam Lock
Cam Lock Screw
Head Cap Bolt
Adjustable Pin
Machine Screw
Drawer Pull Handle
Wood Screw
1 pc.
1 pc.
5 pcs.
5 pcs.
19 pcs.
33 pcs.
4 pcs.
4 pcs.
10 pcs.
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Assembly Instructions 2/4
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.
L
K
STEP 1
Put Cam Lock Screws into the pre-drilled holes of Leg (K),(L) and tighten.
Cam Lock Screw
L
C
N
D
N
C
Cam Lock
K
STEP 2
Attach Back Stretcher (C) to Leg (K) using Cam Locks.
Attach Back Stretcher (D) to Back Stretcher (C).
Slide Back Panel (N) to unit, then attach Back Stretcher (C) to unit using Cam Locks.
Attach Leg (L) to the unit using Cam Locks.
E
Assembly Instructions 3/4
Head Cap Bolt
H
STEP 3
Attach unit from Step 2 and Middle Panel (E) to Base (H) with Head Cap Bolts.
Head Cap Bolt
J
H
M
I
M
STEP 4
Attach Leg (I) and (J) to Base (H) with Head Cap Bolts.
Slide Side Panels (M) into position.
Assembly Instructions 4/4
STEP 5
Attach Rail (F) to unit
with Head Cap Bolts.
Insert Adjustable Pins
Into both side panels and
Middle Panels at the desired level.
Slide Shelf (G) into place.
Assemble Pull Handle
to Door (P) and (Q) with
Machine Screws. (see Figure 1)
Attach Door (P) and (Q) to
the side panels
by sliding the door lift hinges into
the side panel lift hinges.
(see Figure 2)
Machine Screw
Pull Handle
F
P
Head Cap Bolt
Head Cap Bolt
F
G
G
G
G
Q
O
O
(Figure 1)
(Figure 2)
A
O
O
A
B
(Figure 3)
Wood Screw
STEP 6
Attach Top (B) to Top Unit (A)
with Wood Screws. (see Figure 3)
Remove the drawers in
Top Unit (A) and assemble
Pull Handle with Machine Screws.
Place Top (A) on the unit with
Head Cap Bolts.
Slide the Drawers into position.
Head Cap Bolt
Adjustable Pin
Insert Adjustable Pins
Into both side panels at
the desired level.
Slide Shelf (O) into Place.
Loading...