88 5004 694
Pantry
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
Side Panel
B.
2 pcs.
D.
Back Stretcher
4 pcs.
C.
Side Panel
2 pcs.
G.
Base
1 pc.
H.
Base
1 pc.
Hardware List
Cam Lock
24 pcs.(+1 extra)
I.
Shelf
4 pcs.
Wood Screw
for Back Panel
16 pcs. (+1 extra)
E.
Back Stretcher
2 pcs.
J.
Door
2 pcs.
F.
Back Panel
4 pcs.
K.
Door
2 pcs.
Machine Screw
4 pcs.
Cam Lock Screw
24 pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Adjustable Pin
16 pcs. (+2 extra)
Tools recommended for assembly : Level
Door
Pull Handle
4 pcs.
Revised date : 15May2012
Assembly Instructions 2/5
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
*You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Cam Lock Screw
A
G
H
STEP 1
B
B
Cam Lock Screw
C
C
Put Cam Lock Screws into the pre-drilled holes of Top (A) Side Panels (B),(C) Base (G)
and (H) and tighten.
STEP 2
Attach Back Stretcher (D) to
Side Panel (B) using Cam Lock.
Attach Back Stretcher (E) to
Back Stretcher (D).
Slide Back Panels (F) into place.
Assembly Instructions 3/5
C
F
D
Attach Back Stretcher (D) to
unit using Cam Lock.
Attach Side Panel (C) to unit using Cam Locks.
Cam Lock
E
D
F
B
STEP 3
H
Attach unit from Step 2 to Base (H)
using Cam Locks.
Cam Lock
STEP 4
Attach Base (G) to unit using Cam Locks.
Attach Door (J) and (K) to unit by sliding
the door lift hinges into the Side Panel
lift hinges. (see Figure 1)
Cam Lock
Assembly Instructions 4/5
G
G
A
(Figure 1)
STEP 5
Attach unit from Step 2 to Base (G) using Cam Locks
Attach Door (J) and (K) to unit by sliding
the door lift hinges into the Side Panel lift hinges.
(see Figure 1)
Cam Lock
Attach Top (A) to unit using Cam Locks.
.
Assembly Instructions 5/5
STEP 6
Attach the Door Pull Handle to Doors (J) and (K) using Machine Screws. (see Figure 2)
Insert the Adjustable Pins into both Side Panels at the desired level.
Place Shelves (I) into position.
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(see Figure 3)
Insert 16X Wood Screws from the back
of the unit and tighten.
(see Figure 4)
Note: Unit must be level
before tightening these screws.
(Figure 2)
Adjustable Pin
I
J
K
I
(Figure 3)
I
J
K
I
Wood Screw
(Figure 4)
Loading...