88 5000 89
Hampton
Swivel Stool
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Hardware List
A.
Seat
1 pc.
B.
Back Seat
1 pc.
D.
Base
1 pc.
C.
Foot Rest
1 pc.
E.
Leg
4 pcs.
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Small Flat Washer
1/4” x 12 mm.
4 pcs. (+1 extra)
Spring Washer
1/4”
4 pcs. (+1 extra
Medium Flat Washer
5/16” x 16 mm.
4 pcs. (+1 extra)
Spring Washer
5/16”
8 pcs. (+1 extra)
Large Flat Washer
5/16” x 23 mm.
4 pcs. (+1 extra)
Head Cap Bolt
1/4” x 1”
4 pcs. (+1 extra)
Head Cap Bolt
5/16” x 1 1/2”
6 pcs. (+1 extra)
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Head Cap Bolt
1/4” x 1 1/4”
4 pcs. (+1 extra)
Head Cap Bolt
5/16” x 2”
2 pcs. (+1 extra)
Assembly Instruction 2/3
IMPORTANT
* You should keep the Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the fl oor.
Head Cap Bolt (5/16” x 1 1/2”)
Spring Washer (5/16”)
E
D
E
Mediume Flat Washer (5/16” x 16 mm.)
STEP 1
Attach Legs (E) to Base (D) and Foot Rest (C) with
Mediume Flat Washers (5/16” x 16 mm.), Spring
Washers (5/16”), Head Cap Bolts (5/16” x 1 1/2”)
and Head Cap Bolts (1/4” x 1 1/4”).
(see Figure 1), (see Figure 2)
E
STEP 2
C
E
Figure 3
Head Cap Bolt (1/4” x 1 1/4”)
Figure 4
Figure 1
Head Cap Bolt (5/16” x 2”)
Figure 2
Head Cap Bolt
(5/16” x 1 1/2”)
Turning the Seat (A) upside down, attach Back
Seat (B) to Seat (A) with Large Flat Washers
(5/16” x 23 mm.), Spring Washers (5/16”), Head
Cap Bolts (5/16” x 2”) and Head Cap Bolts
(5/16” x 1 1/2”).
(see Figure 3), (see Figure 4)
Large Flat Washer (5/16” x 23 mm.)
Spring Washer (5/16”)
A
B