20 08000 0027
Storage Bench
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Cushion
1 pc.
C.
Back Panel
1 pc.
E.
Plinth
2 Pcs.
B.
Side Panel
2 Pcs.
D.
Base
1 Pc.
F.
Plinth
2 Pcs.
Hardware List
Cam Lock Screw
20 pcs. (+1 extra)
Tool(s) required for assembly: Phillips screwdriver, Level
Cam Lock
20 pcs. (+2 extra)
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
Plastic Cap
12 pcs. (+2 extra)
M3.5x64
Dowel
20 pcs. (+2 extra)
Wood Screw
8 pcs.(+1 extra)
888-680-7460, 877-831-0319
Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Cam Lock Screw
F
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes in
Plinths (F), then tighten.
(See Figure 1)
STEP 2
Attach Plinths (E) to Plinths (F)
with Cam Locks. (See Figure 2)
F
F
E
Figure 2
Cam Lock
E
F
Assembly Instructions 3/4
STEP 3
Place Base (D) upside down on a soft cloth.
Insert Dowels into pre-drilled holes in Base (D).
Attach unit to Base (D) with Wood Screws.
(See Figure 3)
Dowel
Figure 3
Wood Screw
D
B
Cam Lock
Plastic Cap
STEP 4
Turn unit over to its’ upright position.
C
B
D
Cam Lock Screw
Dowel
Insert Dowels and Cam Lock Screws into pre-drilled holes in Base (D).
Insert Dowels into pre-drilled holes in Back Panel (C).
Attach Side Panels (B) to Back Panel (C), then attach to unit with Cam Locks.
Attach Plastic Caps to Cam Locks. (See Figure 4)
Figure 4
Assembly Instructions 4/4
Cam Lock Screw
STEP 5
Place Cushion (A) upside down on a soft cloth.
Insert Cam Lock Screws into pre-drilled holes in Top (A).
A
STEP 6
A
Dowel
Cam Lock
Plastic Cap
Insert Dowels into pre-drilled holes in unit.
Attach Cushion (A) to unit with Cam Locks.
Attach Plastic Caps to Cam Locks.
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is underno obligation to provide replacement parts. Parts are not available forfully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Loading...