20 05525 0942
Kitchen Island
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
B.
Side Panel
1 pc.
C.
Middle Panel
1 pc.
D.
Side Panel
1 pc.
E.
Back Panel
1 pc.
F.
Back Panel
1 pc.
Hardware List
Cam Lock
28 pcs. (+6 extra)
Cam Lock Screw
28 pcs. (+2 extra)
M6x35
Long Screw
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
M3x15
Wood Screw for Magnet
2 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
16 pcs. (+1 extra)
Magnet
1 pc.
M3.5x25
Wood Screw (long)
40 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
M4x28
Machine Screw
9 pcs.
Cartons 20 05525 0941 and 0943 are also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level
Knob
1 pc.
Handle
4 pcs.
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Side Panels (B), (D), Middle Panel (C),
Back Panel (E) and Base (I), then tighten.
(See Figure 1)
B
Cam Lock Screw
A
Cam Lock Screw
D
E
C
Cam Lock Screw
Cam Lock Screw
I
Figure 1
Assembly Instructions 3/7
STEP 2
Attach Back Panel (E) to
Side Panel (B) with Cam Locks.
(See Figure 2)
F
Cam Lock
Attach Back Panel (F) to
unit with Cam Locks.
E
B
Figure 2
STEP 3
Attach Front Rail (H) to Middle Panel (C).
Attach Front Rail (G) to Middle Panel (C)
with Cam Lock.
Attach unit from Step 3 to unit from
Step 2 with Cam Locks.
H
C
G
Cam Lock
STEP 4
Attach Side Panel (D) to unit
with Cam Locks.
Assembly Instructions 4/7
D
Cam Lock
Long Screw
Flat Washer
I
STEP 5
Attach Base (I) to unit with Flat Washers,
Long Screws and Cam Locks. (See Figure 3)
Attach Magnet to unit with Wood Screws
for Magnet into pre-drilled holes,
then tighten. (See Figure 4)
Wood Screw for Magnet
Magnet
Cam Lock
Figure 3
Figure 4
Drawer (L)
Assembly Instructions 5/7
Bottom
L1
L3
L2 L4
Roller at backWood Screw (long)
STEP 7
Slide Drawer Bottom (L5) into groove.
Attach Drawer Bottom (L5) to
unit with Wood Screws (short).
Machine Screw
STEP 6
Attach Drawer Front (L1) and
Drawer Back (L2) to Drawer Side (L3)
with Wood Screws (long).
Attach Drawer Side (L4) to unit
with Wood Screws (long).
Wood Screw (short)
L5
Part List
L1.
Drawer Front
2 pcs.
Handle
L2.
Drawer Back
2 pcs.
L3.
Drawer Side
2 pcs.
STEP 8
Attach Handle with Machine Screws.
L4.
Drawer Side
2 pcs.
L5.
Drawer Bottom
2 pcs.
Drawer (M)
M3
Assembly Instructions 6/7
Bottom
M1
M2
Wood Screw (long)
Roller at back
STEP 10
Slide Drawer Bottom (M5) into groove.
Attach Drawer Bottom (M5) to
unit with Wood Screws (short).
M4
Machine Screw
STEP 9
Attach Drawer Front (M1) and
Drawer Back (M2) to Drawer Side (M3)
with Wood Screws (long).
Attach Drawer Side (M4) to unit
with Wood Screws (long).
Wood Screw (short)
M5
Part List
M1.
Drawer Front
2 pcs.
Handle
M2.
Drawer Back
2 pcs.
M3.
Drawer Side
2 pcs.
STEP 11
Attach Handle with Machine Screws.
M4.
Drawer Side
2 pcs.
M5.
Drawer Bottom
2 pcs.
Cam Lock
L
M
M
Assembly Instructions 7/7
A
L
K
J
K
Adjustable Pin
Figure 5
Figure 6
STEP 12
Turn unit from Step 5 over to its’ upright position.
Attach Top (A) to unit with Cam Locks.
Insert Adjustable Pins into side panel and middle panel at desired level.
Knob
Machine Screw
Figure 7
Place Shelves (K) into position.
Attach Door (J) to unit by sliding door hinges into side panel hinges. (See Figure 5)
Attach Knob to Door (J) with Machine Screw. (See Figure 6)
Slide Drawers (L) and (M) into position.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 7)
Note: Unit must be level to work properly.
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is underno obligation to provide replacement parts. Parts are not available forfully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Loading...