Page 1
20 05520 0027
Storage Bench
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Cushion
1 pc.
D.
Front Rail
1 pc.
E.
Front Rail
1 pc.
Hardware List
Hex Wrench
1 pc.
Cam Lock
10 pcs. (+2 extra)
B.
Side Panel
1 Pc.
F.
Base
1 Pc.
M3.5x32
Wood Screw
6 pcs.(+1 extra)
C.
Side Panel
1 Pc.
G.
Back Panel
1 Pc.
Spring Washer
4 pcs. (+1 extra )
Small
Hex Wrench
1 pc.
Cam Lock Screw
10 pcs. (+1 extra)
Tool(s) required for assembly: Phillips screwdriver
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
M6x32
Head Cap Bolt
4 pcs. (+1 extra)
888-680-7460, 877-831-0319
Flat Washer
4 pcs. (+1 extra )
Page 2
Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
B
Cam Lock Screw
G
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes in
Side Panels (B), (C), Front Rail (E) and Back Panel (G), then tighten.
(See Figure 1)
E
E
STEP 2
Attach Base (F) to Back Panel (G)
with Cam Lock. (See Figure 2)
C
Cam Lock
Attach Front Rail (E) to unit with Cam Lock.
Figure 2
F
G
Page 3
Assembly Instructions 3/4
STEP 3
Attach unit and Front Rail (D) to
Side Panel (C) with Cam Locks, Head Cap Bolts,
Spring Washers and Flat Washers.
(See Figure 3)
Head Cap Bolt
Spring Washer
Flat Washer
D
Figure 3
Cam Lock
C
B
Cam Lock
Flat Washer
Spring Washer
Head Cap Bolt
STEP 4
Attach Side Panel (B) to unit
with Cam Locks, Head Cap Bolts,
Spring Washers and Flat Washers.
Page 4
Figure 4
Assembly Instructions 4/4
Wood Screw
STEP 5
Place Cushion (A) upside down on a soft cloth.
Attach unit to Cushion (A) with Wood Screws. (See Figure 4)
A
STEP 6
Turn unit over to it’s upright position.
Page 5
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is underno obligation to provide replacement parts. Parts are not available forfully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Loading...