Homestyles 20 05436 0923 Assembly Instructions
20 05436 0923
Storage Island
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
D.
Bottom
1 pc.
E.
Shelf
3 pcs.
Hardware List
H.
Plinth
2 pcs.
G.
Rail
2 pcs.
I.
Drawer
1 pc.
J.
Drawer
2 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
24 pcs. (+2 extra)
Cam Lock
24 pcs. (+6 extra)
M6x32
Head Cap Bolt
12 pcs. (+1 extra)
M3.5x32
Wood Screw
4 pcs. (+1 extra)
Flat Washer
12 pcs. (+1 extra)
Adjustable Pin
12 pcs. (+1 extra)
Spring Washer
12 pcs. (+1 extra)
M4x25
Machine Screw
6 pcs.
Cartons 20 05436 0921 and 0922 are also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/16” Drill Bit, 3/8” Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Knob
6 pcs.
Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
A
Cam Lock Screw
Cam Lock Screw
D
H
B
C
Cam Lock Screw
H
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A), Side Panels (B), (C),
Bottom (D) and Plinths (H), then tighten. (See Figure 1)
Figure 1
Assembly Instructions 3/8
STEP 2
Attach Back Panel (F) to Bottom (D) with Cam Locks. (See Figure 2)
Note: Arrow label indicates front of Bottom (D).
D
F
Figure 2
H
Arrow label at front
Cam Lock
Cam Lock
STEP 3
Attach Plinths (H) to unit with Cam Locks.
H
Loading...