Homestyles 20 05420 94Q1 Assembly Instructions
20 05420 94Q1
Kitchen Island
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
Patent 8,584,600 B2
A.
To p
1 pc.
B.
Leaf Top
1 pc.
Hardware List
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
23 pcs. (+4 extra)
Cam Lock
23 pcs. (+6 extra)
M6x38
Head Cap Bolt
6 pcs. (+1 extra)
Adjustable Pin
16 pcs. (+1 extra)
M3x25
Wood Screw (long)
24 pcs. (+1 extra)
M3x16
Wood Screw (short)
28 pcs. (+1 extra)
M3.5x19
Wood Screw
9 pcs. (+1 extra)
Magnet
2 pcs.
Knob
5 pcs.
M4x32
Machine Screw
5 pcs.
Carton 20 05420 94Q2 and 94Q3 are also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Make sure unit is level before tightening these screws.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Top (A), Base (C), Front Rail (E),
Back Rail (F) and Side Panels (H), (I)
on a soft cloth.
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Front Rail (E), Back Rail (F) and
Side Panels (H), (I), then tighten.
(See Figure 1)
Attach Magnets to Front Rail (E)
by inserting Wood Screws (short)
into pre-drilled holes, then tighten.
(See Figure 2)
A
C
Cam Lock Screw
Wood Screw (short)
Magnet
F
Figure 1
Figure 2
Cam Lock Screw
H
E
Cam Lock Screw
I
Assembly Instructions 3/8
STEP 2
Attach Middle Panel (J) to Front Rail (E)
and Back Rail (F) with Cam Locks.
(See Figure 3)
Attach Base (C) to unit with Cam Locks.
Figure 3
Cam Lock
E
F
J
Cam Lock
C
STEP 3
H
Attach unit to Side Panel (H) with
Cam Locks and Head Cap Bolts.
(See Figure 4)
Head Cap Bolt
Figure 4
Loading...