20 05170 0049
Hall Tree
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Seat
1 pc.
B.
Base
1 pc.
I.
To p
1 pc.
J.
Shelf
1 pc.
E.
Back Panel
1 pc.
P.
Back Rail
1 pc.
Q.
Back Panel
1 pc.
K.
Side Panel
1 pc.
N.
Back Upright
1 pc.
M.
Divider
1 pc.
H.
Foot
4 pcs.
L.
Side Panel
1 pc.
O.
Back Rail
1 pc.
C.
Side Panel
1 pc.
D.
Side Panel
1 pc.
F.
Door
1 pc.
G.
Door
1 pc.
Hardware List
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
14 pcs. (+1 extra)
Cam Lock
14 pcs. (+2 extra)
Hook
4 pcs.
M3x14
Wood Screw
for Hook
8 pcs. (+1 extra)
M6x45
Head Cap Bolt
4 pcs. (+1 extra)
Magnet
1 pc.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
M3x14
Wood Screw
for Magnet
2 pcs. (+1 extra)
M4x22
Machine Screw
4 pcs.
R.
Back Panel
2 pcs.
Knob
4 pcs.
Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in future.
STEP 1
Attach Side Panels (C) and (D) to Back Panel (E), then flip the locks. (See Figures 1 and 2)
Figure 1
Figure 2
Lock
C
Lock
E
D
H
H
B
H
STEP 2
Attach Base (B) to unit, then flip the locks.
H
Insert Feet (H) into pre-drilled
holes of Base (B), then tighten.
Assembly Instructions 3/7
STEP 3
Turn unit to its’ upright position.
Attach Doors (F) and (G) to unit by sliding door hinges into side panel hinges.
(See Figure 3)
Attach Knobs to Doors (F) and (G) with Machine Screws.
(See Figure 4)
Figure 3
Figure 4
F
G
Machine Screw
Knob
STEP 4
Insert Cam Lock Screws into pre-drilled holes of Top (I) and Side Panels (K), (L).
(See Figure 5)
Figure 5
I
Cam Lock Screw
K
L
Assembly Instructions 4/7
STEP 5
Attach Hooks to Back Rail (O) with Wood Screws for Hook.
(See Figure 6)
O
Figure 6
Wood Screw
for Hook
Hook
STEP 6
Attach Shelf (J) and Back Rails (O), (P)
to Side Panel (K) with Cam Locks.
(See Figure 7)
J
STEP 7
O
Cam Lock
P
Figure 7
K
Q
R
N
Slide Back Panel (R) and Back Upright (N) into position.
Slide Back Panels (R) and (Q) into position.
R
Assembly Instructions 5/7
STEP 8
Attach Side Panel (L) to unit with Cam Locks.
Cam Lock
L
Figure 8
Figure 9
STEP 9
Attach Seat (A) to unit with Head Cap Bolts.
(See Figure 8)
Attach Magnet to unit with Wood Screws for
Magnet into pre-drilled holes. (See Figure 9)
Magnet
Wood Screw
for Magnet
A
Head Cap Bolt
Assembly Instructions 6/7
STEP 10
Turn unit to its’ upright position.
Attach unit to unit from Step 3, then flip the locks.
Lock
Cam Lock
I
M
STEP 11
Attach Divider (M) to unit.
Attach Top (I) to unit with Cam Locks.
Level unit by adjusting the adjustable
levelers on bottom of unit. (See Figure 10)
Figure 10
Assembly Instructions 7/7
IMPORTANT
To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly.
STEP 12
Place unit at desired location.
3/8” wall hole
Drill a 3/8” hole in wall in-line with
pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tip-over Restraint through
Bracket on wall and Bracket on unit.
(See Figure 11)
Put tie end of Tip-over Restraint into lock
end of Tip-over Restraint and pull until tight.
Anchor in wall
Tie end
Lock end
Bracket at
top of unit
Tip-over
Restraint
Bracket
on wall
Wall Screw
Figure 11
Pre-drilled hole
at top of unit
Wood Screw
Hardware List
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tip-over Restraint
1 pc. (+1 extra)
Drill 3/8” hole in wall
M3.5x40
Wall Screw
1 pc. (+1 extra)
Top of unit
M3.5x16
Wood Screw
1 pc. (+1 extra)
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is underno obligation to provide replacement parts. Parts are not available forfully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Loading...