Home Star R00001 User Manual

Blackstone Indoor Remote Controlled Outlets

Set of 4 Indoor Remote Outlets
Wireless Remote Control WRCS14

Outdoor Power Stake and Remote Package Includes:

(4) Wireless Wall Outlet Receivers (Receiver Units)
(1) Four Button Hand Held Remote Control (Sender Unit)
(1) Battery Type: DL2032

Features:

Blackstone Indoor Remote Controlled Outlets operate on a radio frequency and are not dependent on line of sight. They will
perform regardless of walls, doors, and floors.

Operation:

Remove Pull Tab from Battery Chamber

In order for the remote to function, you need to remove the protective insert from the hand held remote control to allow the
battery to make proper contact with the hand held remote control.

Plug in Receiver Units

Plug the individual wall receiver units into any standard grounded indoor 115V/60Hz wall outlet. Please Note: The Indoor Remote
Controlled Outlets require a grounded outlet. If you do not have an indoor grounded outlet, contact your electrician to upgrade your
electrical system for your safety.

Operation and Safety

Use only 1 Indoor Remote Controlled Outlet per AC outlet. A distance of at least 24 inches should be maintained between individual
receiver units. Do not overload an individual Indoor Remote Controlled Outlet beyond 1800 Watts. Reasonable care should be
taken to ensure the Receiver Unit is correctly inserted into the wall outlet. For indoor use only.

This product is not intended to be used outside of the limits noted above. For residential use only. Any use in such a manner or in
any manner contained herein shall void any warranty conveyed with this product and can cause serious damage to person and/or
property. Should use occur outside of the manner prescribed in these instructions Blackstone International, Ltd. shall not be liable
for such improper use.

Receiver Function:

The power button is located on the front of the receiver. The power button can be used to manually switch the receiver on
and or off independently of the included hand held remote control. A blue LED light will appear around the power button when the
receiver is plugged in. If no lights appear in the clear ring around the power button, check to make sure that the power for your
wall outlet is turned on.

1