HomeScenario HSK 200Z User Manual

User's manual of HSK-200Z

1. Introduction

The HSK-200Z often work with the HSD-400Z, HSM-300Z and HSK-100Z as the above
picture.

The HSK-200Z is the bridge lights through HSC-50Z as the above picture.

These devices provides functionalities required by a typical home theater or meeting
room integration. In this starter kit, we include

One HSK-200Z scenario hub
Two HSD-400Z power meter
One HSK-100Z Universal IR remote controller with Z_Wave repeater.
One HSM-300Z projector screen cotnroller

In addition, it can work with other window shade device or switch/dimmer as well.

In this document, we assume that we use HSK-100Z as the primary controller. The
HSK-200Z can work with any Z-Wave compatible primary controller, which support
ASSOCIATION and CONFIGURATION command classes. Please refer to the manual of
your controller for the details.

2. Specifications

3. Supported command class

The HSK-200Z is AV controller which supports the following command classes

BASIC
Simple AV Control
Version
Manufacturer Specific
Association
Configuration

3.1. BASIC command class

The basic command class is mapped to the scene activation command classes. The value
The basic get will return the last invoked scene.

will be mapped into 3. ofit is the scene ID. If the value is higher than 3, it

3.2. Simple AV control

The simple AV control can be used to send IR signals from the internal database.
Pleaserefer to the table in the appendix.

3.3. Association

The HSK-200 supports the following groups.