HOMEPURE GS7U User Manual
Model GS7U
CLOTHES & FABRIC STEAMER
CLOTHES & FABRIC STEAMER
The home:pure clothes and fabric steamer helps care for your clothes
and is extremely versatile in removing creases from fabrics in most
locations, including curtains and upholstery. It makes dealing with
large expanses of fabric such as tablecloths, sheets and bedding
extremely easy.
This steamer has one setting which is suitable for all fabrics; it will not
burn or scorch and provides a sheen-free nish. Safe to use on delicate
fabrics like silk, chiffon and wool, the steamer is ideal for decorative
detailing such as embroidery, buttons and beading.
Features:
• 60 second fast heat up
• 1200w powerful steam generation
• Continuous steam distribution
• 1.5m steam hose
• Hanging pole
• Removable 2L water tank, provides 1 hour steam time
• Portable and lightweight
• 2.5m cord
• 2 year guarantee
WARNING! HOT STEAM CAN SCALD. PLEASE READ THESE
INSTRUCTIONS CAREFULLY BEFORE USE.
Attachments
• Hanger attachment
• T-nozzle for general steaming
• Bristle brush to restore textured fabrics and remove lint
• 3ft extension wand to reach the top of curtains
• Concentrator nozzle for collars, seams and pleats
• Special pressing attachment for trousers, sleeves and collars
CLOTHES & FABRIC STEAMER ASSEMBLY
STEP 1 - HANGING POLE
• Fit the three parts of the hanging pole together.
• Attach the hanging pole to the steamer and turn the key lock to
secure in place.
• Place the T-nozzle holder with hanger attachment on to the top of the
hanging pole.
STEP 2 - ATTACHING THE HOSE
• Attach the hose to the steamer, ensuring that the arrows line up.
• Twist clockwise to lock into place.
Note: Hose may be stiff at rst, but will relax after initial use.
STEP 3 - FITTING ATTACHMENTS
• Choose an attachment. (Use the T-nozzle for general steaming)
• Attach the T-nozzle/chosen attachment to the hose, ensuring that the
arrows line up.
• Twist clockwise to lock into place.
• Rest the T-nozzle on the T-nozzle holder with hanger attachment.
• When changing attachments, ensure the steamer is switched off and
unplugged from the mains, to avoid contact with hot steam.
STEP 4 - FILLING THE WATER TANK
• Only use clean cold water in the water tank.
• We recommend the use of distilled water in areas of hard water.
• Remove the water tank from the steamer by the handle.
• Unscrew the valve cap on the base of the water tank.
• Fill with clean, cold water to the desired level. Do not overll.
• Replace the valve cap.
• Fit the water tank back on the steamer, ensuring that it is securely
seated.
INSTRUCTIONS FOR USE
• IMPORTANT! Before use, always test fabric for colour fastness in an
inconspicuous spot.
• Ensure the Clothes & Fabric Steamer is switched OFF ‘‘0’’.
• Check that the hose is secure, the hanging pole is assembled and
T-nozzle/chosen attached is correctly tted.
• Plug into a suitable mains supply.
• Switch the steamer ON ‘‘I’’. The switch lights red to indicate power
is on.
• The steamer will be ready to use in around 60 seconds.
• Steam will be produced from the T-nozzle when ready to use.
• Always rest the T-nozzle on the T-nozzle holder with hanger attachment
while in use.
Note: During use, the hose or steamer may gurgle or make a noise,
or produce less steam. This is a result of condensation collecting
inside the hose. Simply lift the T-nozzle/chosen attachment upward to
gently stretch the hose and allow any condensation to run back into
the steamer till the gurgling noise stops. A normal amount of steam
production will resume.
NEVER LET THE STEAMER NOZZLE AND HOSE REST ON THE
FLOOR FOR ANY LENGTH OF TIME WHILE IN USE, CONDENSATION
MAY CAUSE OVERFLOW FROM THE RESERVOIR.
HOW TO STEAM CLOTHES
• Always test fabric for colour fastness in an inconspicuous spot.
• Do not touch / press the T-nozzle directly against delicate fabrics.
• Open the hanger attachment, and place your garment on the hanger,
or if steaming trousers, keep the hanger attachment closed and hang
the trouser hanger to the side of the hanger attachment.
• Hold the T-nozzle, with the steam jets facing away from you.
• Begin at the bottom of the fabric to allow the steam to rise, removing
creases faster.
CAUTION - AVOID SCALDING YOUR HANDS WITH HOT STEAM
• Slowly move the T-nozzle over the garment.
• The bres of the fabric will relax, eliminating creases.
Loading...