Dimming Actuator flush-mount –
trailing edge
Product ref.: 150609A0
Product features
Flush-mount dimming actuator allows dimming and
switching of connected dimmable LEDs, dimmable
energy-saving lamps, LV and HV halogen lamps as well as
incandescent lamps
Optimised for modern light sources and therefore ideal for
small loads (e.g. LED)
Technical specifications
Supply voltage 230 V/50 Hz
Current consumption 0.35 A
Max. switching capacity 80 VA
Minimum load 3 VA
Standby power consumption 0.4 W
Dimming method Reverse phase control
Load type Ohmic and capacitive lamp load
Cable type and cross section
Installation
Degree of protection IP20
Ambient temperature (operation) -10 to +55 °C
Dimensions (W x H x D) 54 x 33 x 41 mm
Weight 31 g
Radio frequency 868.3 MHz/869.525 MHz
Typ. open area RF range 180 m
Rigid and flexible cable,
0.75-1.5 mm²
In flush-mounted boxes (device
boxes) according to DIN 49073-1
and in ELS Spelsberg junction boxes
(e.g. Abox 25 and Abox 40)
Modern, fully electronic trailing edge dimmer for quiet
operation without noise emission (if compared to older
dimming models)
The Homematic IP app oers infinitely variable dimming of
connected lights in 0.5 percent steps
Low current consumption
Compact design oers easy installation in flush-mounted
boxes or in surface-mounted junction boxes (e.g. ELS
Spelsberg Abox 25) for operation in basements or outdoor
areas
Easy to install thanks to screwless clamps
Comfortable control via Homematic IP app and via
Homematic IP Remote Control
Can be used with the Home Control Access Point in
connection with the Homematic IP app, the Homematic
Central Control Unit CCU2 as well as with various partner
solutions
Logistical data
Product reference 150609A0
EAN code 4047976506095
Short description HmIP-FDT
Packing unit 90
Packing dimensions 122 x 112 x 48 mm
Homematic IP is a brand of eQ-3 AG Subject to modifications. www.homematic-ip.com
Package contents
Homematic IP Dimming Actuator flush-mount – trailing edge
User manual
Version 150609A0/ 1.1 EN
Loading...