Assembly Instructions
Caution : You must read this before you proceed
Computer Table
Picture
Thank You for purchasing our products.
Please carefully read through the instructions herebelow.
Caution : The Glass Table Top and other parts are heavy.
Two adults are required whenever lifting or moving them.
General Care : Keep your furniture out of direct sunlight. Use desk pads and
coasters to protect the surface from dents, scratches, and moisture
condensation from hot or cold liquids.
Cleaning : For cleaning, wipe the surface with damp (not wet) cloth or wipe
dry with a clean lint free cotton cloth. Window cleaning liquid or similar
cleaning products can be used to clean the glass surfaces.
Label Picture Description QTY
A Table Top 1
B Back Panel 1
C Inner Right Panel 1
D Inner Left Panel 1
E Left Panel 1
F Right Panel 1
G Front Panels 2
H
Drawer Back Panel
1
I Drawer Left Panel 1
J
Drawer Right
Panel
1
Parts List
K
Drawer Front
Panel
1
L
Drawer Bottom
Panel
1
M Connecting Panel 1
N Legs 2
O Drawer Left Rail 1
P Drawer Right Rail 1
Q Drawer Left Rail 1
R Drawer Right Rail 1
Label Picture Description QTY
① Bolt (M6x30mm) 4
② Bolt (M5x70mm) 4
③ Bolt (M4x40mm) 4
④
Bolt (M4x18mm) 2
Hardware
⑤
Bolt (M4x14mm) 8
⑥
Cam Bolt & Cam 24
⑦
Drawer Handle 1
⑧ Allen Key 1
⑨ Screwdriver 1
Before
Beginning
Assembly:
Assembly Preparation
Step 1
Assembly Steps
Overview
This product has multiple parts and may require up to 60 minutes to assemble. To give
you an overview of the all parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Affix and screw in Cam Bolts (⑥) into the mounting positions on the side of the
Left Panel (E) and Right Panel (F) with Screwdriver (⑨).
Table Top(A)
Connecting Panel(M)
Legs(N)
Drawer Front Panel(K)
Front Panel(G)
Step2
Step 3
Insert Cam Locks(⑥) into the mounting positions on Back Panel (B).
Note: Ensure the arrow labelled "+ -" on the Cam Lock head points
towards the Cam Bolt(⑥) mounting positions.
Insert the Cam Bolts(⑥) on the Left Panel (E) and Right Panel(F) into the mounting
positions on the narrow side of the Back Panel (B).
Then turn the Cam Locks(⑥) with the Screwdriver(⑨) until they all lock into place.
Place Table Top (A) face down on a clean, non-marring surface.
Screw Cam Bolts (⑥) into the mounting positions on the Table Top (A).
"+‐" label
Cam Bolt Mounting
Positions
Step 4
Step 5
Insert the Cam Locks(⑥) into the mounting positions on the assembled Panels
from Step 2.
Note: Ensure the arrow labelled "+ -" on the Cam Lock head points
towards the Cam Bolt(⑥) mounting positions.
Insert the Cam Bolts(⑥) on the Table Top into the mounting positions on the
bottom side of the Panels.
Then turn the Cam Locks(⑥) with the Screwdriver(⑨) until they all lock into place.
Attach the Drawer Left Rail (O) to the Inner Left Panel (D) and Drawer Right
Rail (P) to the Inner Right Panel (C) using Screws (⑤) with Screwdriver (⑨).
"+ ‐" label
Cam Bolt Mounting
Positions
Step 6
Step 7
Insert Cam Locks(⑥) into the mounting positions on Panels (C& D).
Note: Ensure the arrow labelled "+ -" on the Cam Lock head points
towards the Cam Bolt (⑥) mounting positions.
Insert the mounting positions on the bottom sides of the Panels (C & D) onto the
Cam Bolts on the table top(A).
Then turn the Cam Locks(⑥) with the Screwdriver(⑨) until they all lock into place.
Affix and Screw in Cam Bolts (⑥) into the mounting positions on Front Panel (G).
Step 8
Step 9
Insert Cam Locks (⑥) into the mounting positions on the Panels.
Note: Ensure the arrow labelled "+ -" on the Cam Lock head points
towards the Cam Bolt (⑥) mounting positions.
Insert the Cam Bolts (⑥) on the Front Panel (G) into the mounting positions on the
narrow sides of the Panels(EC&DF).
Then turn the Cam Locks (⑥) with the Screwdriver(⑨) until they all lock into place.
Attach Legs(N) to the Table Top(A) using Bolts (①) with Allen Key (⑧).
Step 10
Step 11
Step 12
Attach Connecting Panel(M) to the Legs using Bolts(②) with Allen Key(⑧).
Affix and screw Cam Bolts (⑥) into the mounting positions on the Drawer Front
Panel (K) with Screwdriver(⑨).
Step 13
Step 14
Insert Cam Locks (⑥) into the mounting positions on the Drawer Boards.
Note: Ensure the arrow labelled "+ -" on the Cam Lock (⑥) head points
towards the Cam Bolt(⑥) mounting positions.
Insert the Cam Bolts (⑥) on the Drawer Front Panels(K) into the mounting positions on
the narrow sides of the Drawer Left Board (I) and Drawer Right Board (J).
Then turn the Cam Locks (⑥) with the Screwdriver (⑨) until they all lock into place.
Slide the Drawer Bottom Panel (L) into the groove of the Drawer Frames(IJK).
Attach the Drawer Back Panel(H) to the Drawer Left and Right Panels(IJ) using
Screws(③) with Screwdriver(⑨).
Step 15
Step 16
Step 17
Attach Drawer Left Rail(Q) to the Drawer Left Panel (I) and Drawer Right
Rail(R) to the Drawer Right Panel(J) using Screws(⑤) with screwdriver(⑨).
Attach Drawer Handle(⑦) to the Drawer Front Panel(K) using Bolts(④) with Allen Key(⑧).
Turn the Table right side up and insert the Drawer.
Push slide the Drawer, as indicated by the drawer, to close.
Inspect and make sure all parts are in place, alll bolts are securely tightened.
Your Computer Table is ready for use.
This Computer Table can only be used on a flat, level surface.
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has
deemed to cause cancer or other reproductive toxicity. Chemicals and elements on this list include wood dust,
brass, and other everyday substances, which can be found in very common household items, such as: lamps,
tableware, jewelry, crystal glasses, electric cords, beauty products, automobiles, and furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one of the 800plus common chemicals and ingredients listed under this law could potentially be on our furniture or packing
materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that the
hazardous exposure limits for any of these chemicals have never been found on furniture products that we’ve
shipped to our customers. Additionally, this warning label is very common and can be found on almost every piece
of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local bank, grocery
store, or restaurant without finding at least one warning. In fact, even the Disney Land Resort has a Proposition
65 warning:
Do not place furniture outside . For indoor use only .
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture near heating or cooling vents.
Do not place furniture under direct sunlight.
Not for commercial use. For residential use only .
Children should not climb or jump on the furniture.
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Loading...