OPERATOR’S MANUAL
ELECTRIC POLE HEDGE TRIMMER
UT44160
Your electric pole hedge trimmer has been engineered and manufactured to our high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
TABLE OF CONTENTS
Introduction ...................................................................................................................................................................... 2
Important Safety Instructions ........................................................................................................................................... 3
Specific Safety Rules .......................................................................................................................................................4
Symbols ........................................................................................................................................................................5-6
Electrical ...........................................................................................................................................................................7
Features .........................................................................................................................................................................8-9
Assembly .....................................................................................................................................................................9-10
Operation ...................................................................................................................................................................10-13
Maintenance ................................................................................................................................................................... 14
Warranty ......................................................................................................................................................................... 15
Parts Ordering / Service ....................................................................................................................................Back Page
INTRODUCTION
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to maintain and operate.
Page 2
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock,
fire, and/or serious personal injury.
READ ALL INSTRUCTIONS
For safe operation, read and understand all instructions
before using this product. Be familiar with all controls and
proper use of the machine. Follow all safety instructions.
Failure to follow all safety instructions listed below, can
result in serious personal injury.
Do not allow children or untrained individuals to use this
unit.
Thoroughly inspect the area where the equipment is to
be used and remove all foreign objects.
Wear safety glasses or goggles that are marked to com-
ply with ANSI Z87.1 standard as well as head protection
when operating this product.
Dress properly. Wear heavy long pants, boots, and gloves.
Do not wear loose fitting clothing, short pants, or go
barefoot. Do not wear jewelry of any kind.
Secure long hair above shoulder level to prevent entan-
glement in moving parts.
Keep all bystanders, children, and pets at least 50 ft. away.
Stay Alert — Watch what you are doing; use common
sense. Do not operate this unit when you are tired, ill, or
under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Keep firm footing and balance. Do not overreach. Over-
reaching can result in loss of balance or exposure to hot
surfaces.
Keep all parts of your body away from any moving part.
Inspect the unit before each use for loose fasteners, etc.
Replace any damaged parts before use.
When not in use, product should be stored indoors in a
dry, locked up place—out of the reach of children.
Use only original manufacturer’s replacement parts. Failure
to do so may cause poor performance, possible injury,
and will void your warranty.
Do not, under any circumstance, use any attachment or
accessory on this product which was not provided with
the product or identified as appropriate for use with this
product in the operator’s manual.
Avoid dangerous environments. Do not use the product
in damp or wet locations. Do not use in rain.
Use the right appliance. Do not use the hedge trimmer
for any job except that for which it is intended.
Do not use on steps, a ladder, or unstable support. Stable
footing on a solid surface enables better control of the
product in unexpected situations.
Do not force the product. It will do the job better and with
less likelihood of a risk of injury at the rate for which it
was designed.
DANGER — Keep hands away from cutting area. Keep
both hands on handles when power is on.
Keep hands away from blades. Do not reach underneath
work or around or over the blade while blade is rotating.
Do not attempt to remove cut material when blade is
moving. Make sure trimmer is off when clearing jammed
materials from blades. Do not grasp the exposed cutting
blades or cutting edges when picking up or holding the
hedge trimmer.
CAUTION — Blade coasts after being turned off.
To reduce the risk of electric shock, this product has a
polarized plug (one blade is wider than the other) and will
require the use of a polarized extension cord. The plug
will fit into a polarized extension cord only one way. If the
plug does not fit fully into the extension cord, reverse the
plug. If the plug still does not fit, obtain a correct polarized
extension cord. A polarized extension cord will require
the use of a polarized wall outlet. This plug will fit into the
polarized wall outlet only one way. If the plug does not fit
fully into the wall outlet, reverse the plug. If the plug still
does not fit, contact a qualified electrician to install the
proper wall outlet. Do not change the equipment plug,
extension cord receptacle, or extension cord plug in any
way.
Do not abuse the cord. Never use the cord to carry the
product or to disconnect the plug from an outlet. Keep
cord away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy
enough to carry the current your product will draw. A wire
gauge size (A.W.G.) of at least 16 is recommended for an
extension cord 50 feet or less in length. If in doubt, use the
next heavier gauge. The smaller the gauge number, the
heavier the cord. An undersized cord will cause a drop in
line voltage resulting in loss of power and overheating.
WARNING: Use outdoor extension cords marked SW-A,
SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOW-A.
These cords are rated for outdoor use and reduce the risk
of electric shock.
Ground Fault Circuit Interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for the
hedge trimmer. Receptacles are available having built-in
GFCI protection and may be used for this measure of
safety.
Inspect extension cords periodically and replace if
damaged. Keep handles dry, clean, and free from oil or
grease.
Page 3
SPECIFIC SAFETY RULES
Use non-slip, heavy-duty protective gloves when operating
the hedge trimmer and when installing or removing
blades.
Always stop the motor and disconnect from power
supply when not in use, before attempting to remove
any obstruction caught or jammed in the blade, or before
removing and installing the blade.
Replace any blade that has been damaged. Always make
sure blade is installed correctly and securely fastened
before each use. Failure to do so can cause serious
injury.
Do not grasp the exposed cutting blades or cutting edges
when picking up or holding the product.
To protect yourself from electrocution, do not operate
within 50 feet of overhead electrical lines.
Never cut any material over 3/4 in. diameter.
Maintain a firm grip on telescoping pole and rear handle
while cutting with hedge trimmer. Keep the blade away
from body.
Know how to stop the unit quickly in an emergency.
To avoid accidental starting, never carry plugged in hedge
trimmer with finger on switch. Be sure switch is off when
plugging in.
Maintain hedge trimmer with care. Keep cutting edge sharp
and clean for best performance and to reduce the risk
of injury. Follow instructions for lubricating and changing
accessories. Inspect hedge trimmer cord periodically and,
if damaged, have it repaired by an authorized service
facility. Inspect extension cords periodically and replace
if damaged. Keep handles dry, clean, and free from oil
and grease.
Check damaged parts. Before further use of the hedge
trimmer, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may affect its
operation. A guard or other part that is damaged should
be properly repaired or replaced by an authorized service
center unless indicated elsewhere in this manual.
Disconnect the plug from power source before making
any adjustments, changing accessories, or storing the
hedge trimmer. Such preventive safety measures reduce
the risk of starting the product accidentally.
Service on the product must be performed by qualified
repair personnel only. Service or maintenance performed
by unqualified personnel could result in injury to the user
or damage to the product.
If the power supply cord is damaged, it must be replaced
only by the manufacturer or by an authorized service
center to avoid risk.
Save these instructions. Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also to
prevent misuse of the product and possible injury.
Page 4
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
hrs Hours Time
Class II Construction Double-insulated construction
Wet Conditions Alert Do not expose to rain or use in damp locations.
Safety Alert Symbol Precautions that involve your safety.
Read the Operator’s Manual
Eye and Head Protection
Gloves
Safety Footwear Wear non-slip safety footwear when using this equipment.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Hot Surface
Operate With Two Hands
Sharp Blade
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Wear eye and head protection when operating this
equipment.
Wear non-slip, heavy-duty protective gloves when handling
the pole saw and the blade.
To reduce the risk of injury or damage, avoid contact with
any hot surface.
Hold and operate the hedge trimmer properly with both
hands.
Do not install or use any type of blade on a product displaying this symbol.
Risk of Electrocution DANGER! Risk of electrocution!
Electric Shock
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
Page 5