Homelife ROMA MQ-3010LR Owner's Manual
OWNER’S MANUAL - NÁVOD K POUŽITÍ – NÁVOD NA POUŽITIE
Patio Heater - Zahradní zářič – Záhradný žiarič
ROMA
Model: MQ-3010LR
This product is strictly prohibited to cover!
The heater is for outdoor use only.
Je přísně zakázáno tento výrobek zakrývat!
Tento zářič je určen pouze k venkovnímu použití.
Je prísne zakázané tento výrobok zakrývať!
Tento žiarič je určený len na vonkajšie použitie.
Read all the safety instructions carefully before use and keep this instruction
manual for future reference.
Před použitím si přečtěte pozorně bezpečnostní pokyny pro zacházení se
zařízením a uschovejte si návod pro budoucí reference.
Pred použitím si prečítajte pozorne bezpečnostné pokyny pre zaobchádzanie so
zariadením a uschovajte si návod pre budúce referencie.
Homelife Electronic Applience Manufactory, 706, 21 Quinghe Road, Ningbo, 315000, P.R. China
EN
2
Original owner’s manual
Thank you for purchasing your new heater. Please read carefully this instruction
before using and operate strictly accordance with the instructions, and especially pay
attention to "Safety Warnings".
Safety warnings
READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE
THIS UNIT. KEEP THE ASSEMBLY INSTRUCTIONS FOR FUTURE
REFERENCE. KEEP THE ORIGINAL PACKAGING FOR USE WHEN
STORING THE HEATER DURING EXTENDED PERIODS OF
NON-USE.
Read all instructions before using this unit.
Do not leave this unit unattended when in use.
This heater will get hot when in use. Do not touch hot surfaces.
Caution: Some parts of this product can become very hot and cause burns.
Particular attention has to be given when children and vulnerable people are
present.
Do not move the unit when in use. Wait until the heater is completely cool before
moving and check that it has been unplugged from the power supply.
Position the unit at least 1m away from highly combustible materials such as
furniture, trees, leaves, dry grass and bushes.
The heater must not face with the heating element pointing upwards towards a
ceiling. The heater element must be facing the area it is to heat.
Warning: In order to avoid overheating do not cover the heater. It is not for drying
clothes.
Keep children and pets at a safe distance from the unit.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
Do not operate the heater if any signs of damage or malfunction manifest
themselves.
Do not attempt to repair or adjust any electrical or mechanical functions on this
unit. The unit does not contain any user serviceable parts. Only a qualified
electrician should perform servicing or repairs. Attempting to repair the unit
yourself will void your warranty.
EN
3
If the power cable is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Do not handle the element with bare hands. If it is inadvertently touched, remove
finger marks with a soft cloth and methylated spirits or alcohol, otherwise the
marks will burn into the element causing premature heater failure.
Do not replace or attempt to replace the element in this product.
This product is suitable for outdoor use. Do not use this heater in the immediate
surroundings of a bath, shower or swimming pool.
This product must not be left outdoors exposed to the elements for long periods of
time.
Do not touch the plug with wet or damp hands.
Do not run the power cable under carpeting. Do not cover the power cable with
rugs, runner, or similar coverings. Arrange the power cable away from foot traffic
and where it will not be tripped over.
Do not wind the power cable around the unit.
Do not insert or allow foreign objects to enter any ventilation or opening on the
heater, as this may result in electric shock, fire, or damage to the heater.
To prevent a possible fire, do not block the air vents.
A heater has hot and arcing or sparking parts inside. Do not use in areas where
petrol, paint, explosive and/or flammable liquids are used or stored. Keep unit
away from heated surfaces and open flames.
Where possible, avoid the use of an extension cable as this may overheat and
cause a fire. However, if you have to use an extension cable, ensure it is suitable
for the purpose, has been tested for outdoor use and preferably has an RCD
device fitted or attached.
Always ensure the heater is plugged into a suitable socket, one that is tested for
outdoor use.
To disconnect heater, turn controls to OFF, then remove plug from socket. Do not
unplug by pulling on the power cable.
Always unplug the unit and ensure the unit is completely cold before moving,
cleaning or storing.
This heater is intended for domestic use only and should not be used
commercially for contract purposes. Any alternative use, not recommended by the
manufacturer, may result in fire, electric shock, or injury to persons.
The use of attachments on the heater is not recommended.
EN
4
Do not use this heater with a programmer, timer, separate remote control system
or any other device that switches the heater on automatically, since a fire risk
exists if the heater is covered or positioned incorrectly.
Warning: This heater is not equipped with a device to control the room
temperature. Do not use this heater in small rooms when occupied by persons not
capable of leaving a room on their own, unless constant supervision is provided.
Always use on a dry, suitably strong, stable, flat and level surface.
Check exterior walls for communication and electrical cables and pipelines.
Should any service lines be present in the immediate vicinity do not install your
heater, find an alternative location to install this product.
Do not position directly above or below an electrical socket.
Do not remove any of the warning stickers or signs from the product.
Installation
Unpack the heater making sure that all the items are present and that there are no
components left in the box and that the heater head is free from any packing material.
Using the detailed drawing follow the steps to assemble your heater.
Do not connect the heater to the power supply until all the assembly is complete.
Do not connect the heater to the power supply if any of the components or the power
cable is damaged in any way.
If in doubt contact your supplier.
EN
5
Assembly
Step 1: Unscrew 6 pcs M6*35 screws, separate the cover and weights.
Using 5 pcs ￠8 plastic anchors and 5 pcs ST4*60 screws to fix the weights
to the ground.(as the below holes with tick, using screw plate)
Step 2: Fix the bottom tube to the base by using 6pcs M6*35mm bolts. Place the
plastic cover onto the bottom tube.
Step 3: Connect the middle tube with bottom tube by screwing them together.
Connect the top tube with middle tube by screwing them together.
EN
6
Step 4: Feed the power cable through the tubes and pull through around 2m of cable.
Push the heater head onto the top tube and fix it in position using the 2pcs
ST4*l0mm screws.
Step 5: Fix the power cable on the base by using 2pcs ST6*14mm screws.
Operation
Connect the power cable to a power socket that is located in a safe, dry area.
The switch on the heater head is used to control the two heat setting.
(I) for 1500W (II) for 3000W
Although the heater is shower proof, do not use when raining or in wet conditions.
Always disconnect the power cable from the electrical supply, when the heater is
not in use.
Cleaning and maintenance
When disconnected from the power supply, clean the outside of the patio heater
with a damp cloth. Never use corrosive or solvent cleaners or immerse in water.
Any maintenance or repairs including replacing the halogen tube should only be
carried out by a qualified electrician or by a recommended service centre.
EN
7
Only use the heater on a firm solid horizontal surface where all the feet on the base
are in contact with the floor. (Should the heater be tilted or fall over the auto cut off
switch will activate)
1. Position the heater outside or in a large open area and well away from any
obstructions such as branches or where the heater is near any objects that can be
effected by heat, such as furniture, curtains or other inflammable objects
(minimum distance 1 meter).
2. Do not use in non-ventilated areas.
3. Do not push any items through, obstruct or cover the grill of the heater head.
4. Do not move when connected to a power supply and always wait for the heater to
cool down before storing away.
5. The head of the unit is at high temperature during operation. Do not touch the
heater head when in use. Unplug the unit and wait till it cools before cleaning.
6. Do not leave turned on and unattended especially when children and or animals
are in the vicinity.
7. The indication of the different positions of switches shall be visible from a distance
of 1.5 m.
8. The rating label or other marks shall be visible after the heater has been installed.
It shall not be placed at the back side of heaters.
9. The unit must be fixed with the clearance of 100 cm to the wall and 30 cm to the
ceiling.
10. The unit must be correctly installed according to the instructions. Make sure the
head is at least 1.8 m from the floor.
11. The unit is at high temperature during operation. It keeps hot for a period after
shut down. Potential danger would occur when touching it during this period.
12. Don't cover the unit with anything during operation or a short time after it's shut
down. Don’t wrap the power cable around the unit.
13. The unit must be handled with care, and avoid vibration or hitting.
14. The unit must be securely grounded during operation.
15. If the unit gets damaged, it must be repaired by professional electricians.
16. The unit is for household use only. It is not safe to use on a building site,
greenhouse, barn or stable where there's flammable dust.
17. Don't use this unit in place where causticity or volatile air exists, i.e. dust, steam,
gas, etc.
18. Don't use this unit as a cloth drier or towel drier. Don't use this unit as a sauna
heater. Don't use this unit in animal farm. Don’t immerse this unit into water for
cleaning.
19. The unit should be plugged in a socket, which is easily visible and reachable.
20. Two Dark points may exist on the surface of the heating elements during the first
few minutes after it is turned on. This is normal, and will not affect the
performance of the unit.
EN
8
Specifications
Model: MQ-3010LR
Disposal
The symbol on the product or in the instructions means that your electrical
and electronic equipment should be disposed at the end of its life
separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer
where you purchased the product.
Voltage AC220-240V
Frequency 50/60Hz
Electric Power 3000W
EN
9
EU Declaration of Conformity
Homelife Electronic Applience Manufactory
706, 21 Quinghe Road
Ningbo, 315000
P.R. China
We hereby certify that the product described followed is in conformity with the LVD
(2014/35/EU) under the certificate no. AN 50348748 0001, EMC (2014/30/EU) under
the certificate no. AE 50351163 0001, RoHS (2011/65/EU), as amended and strictly
correspond to the products tested by TÜV Rheinland LGA Products GmbH under their
certificate no. AN 50348748 0001 based on test results using harmonized standards
in accordance with directive mentioned
Product Name: Radiant Heater ROMA
Model: MQ-3010LR
The heater is in conformity with following standards:
EN 60335-1:2012+A11
EN 60335-2-30:2009+A11
EN 62233:2008
EN 55014-1:2006+A1+A2
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Date: 2018-03-06
Loading...