SUNRISE ALARM
CLOCK
With Multicolor LED Lights
HME040049N
Before using your Sunrise Alarm Clock, please read this manual.
This product is covered by US and International patents, including US Patent Application 29/625,295
TABLE OF CONTENTS
Important Safety Instructions
Getting to know your
Sunrise Alarm Clock
Glossary
Using Your Alarm Clock
FAQs
Troubleshooting
Warranty
Manufacturing Info
Warning
Contact Us
4
5
6
7-8
8
8
9
10
11
11
Important Safety Instructions
SAVE THESE INSTRUCTIONS
For Household Use Only
When using your hOme™ Sunrise Alarm Clock (appliance), basic safety
precautions should always be followed to reduce the risk of re, electrical
shock, and/or injury to persons. Incorrect operation due to ignoring instructions
may cause harm or damage.
• These safety messages detail
potential hazards, injuries, and dire
consequences in minute detail.
FOLLOW EM!
• Read these before you even think
about touching your alarm clock.
• If the cord is damaged, continue
not touching this alarm clock.
Contact us at 1.800.898.3002.
• For your own sanity, plug this clock
in somewhere easily accessible.
• More tips for a successful plug-in:
ensure you are using a properly
polarized outlet and also that the
clock is, in fact, plugged in.
• Avoid ruining the cord. Don’t
submerge it into liquids, step all
over it, lay it over heat insulators,
or cover/smother it.
• We don’t recommend using an
extension cord, because we are
in favor of avoiding re risks at all
costs.
• To clean your clock, unplug it rst
and don’t use ammable liquids.
Explosions are only cool in the
movies.
• Exercise reasonable caution and
supervision if your kid is using this
clock. Who knows what’s going on
inside their little heads’.
• This clock is not a sundial. Keep it
indoors and out of direct sunlight.
For extra safety, put at least 4
inches between it and any wall or
obstacle.
WARNING
To avoid the appliance falling or tipping
over, always place on a at, sturdy
surface. Damage may occur if the
appliance falls.
4
Getting To Know Your Sunrise Alarm Clock
1. Radio
2. Alarm Tone
3. Lower Volume
4. Snooze Button
5. Raise Volume
6. Digital Display Brightness
7. LED Lights
8. AM Icon
9. PM Icon
10. Alarm Icon
11. Sleep Timer Icon
12. Digital Display
13. Decrease LED Brightness
14. Alarm Option
15. Current Time
16. Sleep Timer
17. Increase LED Brightness
18. LED Sunrise Light
19. Speaker
20. Battery
21. USB (5V)
22. Antenna
12h / 24h Toggle
5
Glossary
Radio - Press this button to play
the radio. Hold for 3 seconds to
scan available FM channels.
Alarm Tone - Press this button to
choose an alarm tone, using (+)
and (-) to adjust. Press again to
conrm.
Lower Volume - Press to decrease
volume.
Snooze - Press to momentarily
stop alarm sound. The default
snooze time is 5 minutes. Press
to change it to 10/15/20 minutes.
After that time, the alarm tone will
resume playing.
Raise Volume - Press to increase
volume.
Display Brightness - Press this
button to choose between three
different LED display intensities:
low, high, and off. Note: The
clock will automatically display
the brightest intensity during
programming but will resume
to the chosen option after 5
seconds.
LED Light - Press once to turn on
the light, then press and hold (+)
and (-) to adjust among 10 levels
of brightness. Press a second time
to switch on light colors, using (+)
and (-) to choose between 8 colors
(from C1 to C8): warm white,
cycling color, red, green, orange,
pink, blue, and light green. Press and
hold to switch off.
Digital Display - This screen
displays the time and modes you
have selected.
AM Icon - This indicates AM time
when displayed.
PM Icon - This indicates PM time
when displayed.
Alarm Icon - This indicates you
have programmed an alarm when
displayed.
Sleep Timer Icon - This indicates
you have set a sleep timer when
displayed.
Select down - Touch down to
maneuver among sound, light, or
radio options.
Select up - Touch down to maneuver
among sound, light, or radio options.
Alarm Option - Touch to turn on
alarm mode. The existing alarm
time will display for 2 seconds.
To adjust the alarm time, hold for
3 seconds then use (+) and (-)
to adjust the hour. Tap again to
adjust the minute, and one last
time to conrm.
To dismiss alarm, tap to
stop alarm tone completely.
Current Time - This option is used
to set the time. Touch this button
to switch between a 12-hour
and 24-hour clock, or hold for 3
seconds until the hour time begins
to blink. Then use the (+) and (-)
to adjust the hour. Tap again to
conrm the hour. Move to the
minutes and choose in the same
way. Tap one nal time to set the
time.
Sleep Timer - Touch this button to
initiate sleep timer. Touch it once
to set at 15 minutes and each
press will add 15 minutes to the
timer. Light will gradually dim until
it turns off over the course of set
time. Press twice for 30 minutes,
three times for 60 minutes, and
four times to turn off. Leave for 5
seconds to conrm.
6
Using Your Alarm Clock
Set Up Your Clock
1. Insert one CR2032 battery into the
back of clock. Note that the battery is
for backup power only.
2. Connect to DC 5V power.
Set the Time
1. Hold the Current Time button for 3
seconds until the hour time begins to
blink.
2. Use (+) and (-) to adjust the hour.
3. Touch the Current Time button to
conrm the hour time and move on
to minutes.
4. Use (+) and (-) to adjust the minutes.
5. Touch the Current Time button once
more to conrm.
Program Your Sunrise Alarm
1. Hold for 2 seconds to enter Alarm
setting mode.
2. Use (+) and (-) to adjust the time. Tap
Alarm Option button to conrm.
3. Use (+) and (-) to set up alarm light
rising time: 10/20/30/40/50/60 min/
OFF. Tap Alarm Option button to
conrm.
4. Use (+) and (-) to select the alarm
light color (from C1 to C8, C2 being
the cycling color). Tap Alarm Option
button to conrm.
Set Your Alarm Tone
1. Press the Alarm Tone button to
choose a tone.
2. Use (+) and (-) to select between 7
sounds. Tone 1-6 consist of nature
sounds, while tone 7 plays FM radio.
“Program the Radio”.
3. Wait for clock to return to standby
mode, then press or to adjust
volume. You must not be in “Tone”,
“Light”, “Radio”, or any other mode.
4. Press the Alarm Tone button to
conrm your tone.
NOTE: Alarm volume and radio volume
are adjusted separately.
Adjust Sleep Timer
1. Touch the Sleep Timer button to
initiate sunset simulation.
2. Touch the Sleep Timer button once to
set at 15 minutes. Light will gradually
dim until it turns off over the course
of 15 minutes.
3. Touch the Sleep Timer button a
second time for sunset simulation
over 30 minutes.
4. Touch the Sleep Timer button three
times for 60 minutes.
5. Touch the Sleep Timer button four
times to turn off.
6. Leave for 5 seconds to conrm
selected option.
Adjust Light
1. Press the LED Light button once to
turn on the light (warm white).
2. Use (+) and (-) to adjust between 10
levels of brightness.
3. Press the LED Light button a second
time to switch to cycling color.
4. Use (+) and (-) to choose the other 6
colors: red, green, orange, pink, blue, and
light green.
Adjust Display Brightness
1. Press the Display Brightness button to
choose between three different LED
display intensities: low, high, and off.
2. The clock will automatically display
the brightest intensity during
programming but will resume to the
chosen option after 5 seconds.
Adjust Volume
1. Select the Lower Volume button to
lower the volume.
2. Select Raise Volume button to raise
the volume.
Program the Radio
1. Press this button to play the radio.
7
Using Your Alarm Clock
2. Hold the Radio button for 3 seconds
to scan available FM channels.
These will be automatically saved.
3. Press Radio button once to play
radio.
4. Press (+) and (-) briey to select FM
frequency manually.
5. Press (+) and (-) and hold for 3 seconds
to select FM station one by one.
FAQs
Where should I place my alarm clock?
Place the alarm 16 to 20 inches from
your head, such as on a bedside table.
How long does the snooze buon last?
The Snooze button momentarily stops
the alarm for 5/10/15/20 minutes by
your Snooze setting. Alarm ring will
resume after this time.
Why does the clock need a baery?
The battery serves as a backup power
source if a power failure were to
occur. To ensure that the battery is
functioning, please change regularly.
Troubleshooting
PROBLEM
Buttons are not
responding when
I press them.
Time display
is blinking.
POSSIBLE CAUSES SOLUTIONS
Pressing more than one
button at a time, or failing
to wait at least one
second between presses.
The (:) symbol on your
LED display should blink
continually. This is normal
and ensures your clock
is functioning. If the
numbers are blinking, you
can adjust the time using
(+) or (-).
Can I use a colored light during sunrise
or sleep timer?
Colored light can be used in sunrise
alarm, but not during sleep timer. To
use the colored light options, press the
light button twice and use (+) and (-) to
select your color.
No sound for alarm clock even though
the radio works ne?
In standby mode, increase the alarm
clock volume with the raise volume
button (You must not be in “Tone”,
“Light”, “Radio”, or any other mode.)
Unplug your alarm clock for
at least 3 seconds before
reconnecting to power.
Touch the Current Time
button to return to the
current time.
You can also turn off the
LED display completely by
pressing the digital display
brightness button.
8
Warranty
hOme™ offers a limited two-year period on all of our products purchased new and
unused from hOme Technologies, LLC or an authorized reseller, with an original proof
of purchase and where a defect has arisen, wholly or substantially, as a result of
faulty manufacture, parts, or workmanship during the warranty period. The warranty
does not apply where damage is caused by other factors, including but without
limitation: (a) normal wear and tear; (b) abuse, mishandling, accident, or failure to
follow operating instructions; (c) exposure to liquid or inltration of foreign particles;
(d) servicing or modications of the product other than by hOme™; (e) commercial or
non-household use.
The hOme™ warranty covers all costs related to restoring the proven defective product
through repair or replacement of any defective part and necessary labor so that
it conforms to its original specications. A replacement product may be provided
instead of repairing a defective product. HOme™’s exclusive obligation under this
warranty is limited to such repair or replacement.
A receipt indicating the purchase date is required for any claim, so please keep
all receipts in a safe place. We recommend that you register your product on our
website, homelabs.com/reg. Although greatly appreciated, the product registration is
not required to activate any warranty and product registration does not eliminate the
need for the original proof of purchase.
The warranty becomes void if attempts at repair are made by non-authorized third
parties and/or if spare parts, other than those provided by hOme™, are used.
You may also arrange for service after the warranty expires at an additional cost.
These are our general terms for warranty service, but we always urge our customers
to reach out to us with any issue, regardless of warranty terms. If you have an issue
with a hOme™ product, please contact us at 1-800-898-3002, and we will do our best
to resolve it for you.
This warranty gives you specic legal rights, and you may have other legal rights which
vary from state to state, country to country or province to province. The customer
may assert any such rights at their sole discretion.
9
Manufacturing Info
This manual is to be used with all items with the model number
HME040049N
SKU# : HME040049N
PART#: HME040049MNL
RATING: 5V 1A
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
10
Warning
Keep all plastic bags away from children.
Manufacturer, distributor, importer and seller are not liable for ANY damage caused by
improper use, storage, care or failure to follow warnings associated with this product.
Contact Us
CHAT WITH US
homelabs.com/chat
CALL US
1-(800)-898-3002 help@homelabs.com
EMAIL US
11
All rights reserved, hOme
™
. Printed in China.
For Household
Use Only
1-800-898-3002
help@homelabs.com
homelabs.com/help
© 2016 hOme Technologies, LLC
37 East 18 Street, 7th Floor
New York, NY 10003
Loading...