Home Easy HE106 User Manual

HOME

easy

HE-106 Remote Control

Door Release

The HE-106 Remote control Door Release allows to
you unlock and allow access control to a variety of
aluminium, timber and steel doors.
Simply press the button on your HomeEasy remote
to unlock your door

V1.0

Installation:

HE106 Door Release:

First select a suitable location for the HE-106 door release unit, it is recommended
that HE-106 is not placed in direct sources of sunlight, heat and onto metallic
surfaces, as this will the effect the operating performance.
Before fitting the door release unit, test the unit to make sure the location is suitable
e.g. operating the unit through an external wall will reduce the operating range, if
required move the unit close to the external wall. The HE-106 is an accessory product

1: The HE-106 base plate, can be attached using either the self adhesive strip or screws.

Compatible with HE100, HE,101, HE300
HE301, HE303, HE307 & HE308 Remote Controls

-Suitable for right, left, inward and
outward opening doors.

-Fail Lock Operation

-30 Metre Range

The HE-106 is an accessory product for the HomeEasy
range of products, an additional remote control unit is
required for the HE106 door release to operate.

Set-Up Diagram:

ON

SX37

HE-106

Door Lock

SX37

HE-106

Door Lock

2: Clip the HE-106 onto
the base plate using
the key-hole slots.

3: Connect the SX37 power adapter into the
terminal connections "1" and "2" as per the
diagram.
Terminal 1 + wire

Positive

4: Plug the SX37 power adapter into a standard 13amp
socket, the HE-106 will beep twice and the LED will flash to
indicate that the power is connected. Now program a
HomeEasy remote control to the HE-106 unit

-See Pairing/Deleting Remote Control (Remote Control Not
Included).

5: Install the HomeEasy Door Lock into the door frame, making sure the location
and orientation is correct for the door. The HomeEasy Door lock is powered by a
12VAC -300mA transformer (not included), connect one terminal from the
transformer to one of the terminals on the door lock.

2 3 4 5 6 7

1

1 65432

Negative

12V DC Power

T

12V AC~300mA (Not Included)

12V AC~300mA (Not Included)

T

6: Connect the second wire from the transformer
to terminal 4 on the HE106 and the connect a
wire from terminal 5 to the second terminal on
the HomeEasy Door Lock.
Then set all the dip-switchs to the "Off" position.

1 65432

1

Transformer

2 3 4 5 6 7

1 65432

HomeEasy
Door Lock

Operation:

Open Door:

Lock Door:

Test Mode:

Press the "On button on a paired HomeEasy Remote Control. For the
HE-100 press and hold the lock key.

Press the "Off" button on a paired HomeEasy Remote Control. If no lock
command is received, the HE-106 it will automatically lock after
30 seconds. For the HE-100 release the lock key.

The HE-106 can be set into a test mode by setting dip-switch 2 to the
"On" position.

Pairing/Deleting with Remote Control:

Up to Six remote control units can be paired with the HE-106 unit.
To program a HomeEasy Remote Control with the HE-106, set dip-switch 1 to the
"On" position and then press the "On" button on the HomeEasy remote control
(Except HE200 Remote Control).

ON

On

1 65432

The HE-106 will bleep twice to indicate that the remote control is paired to the
HE-106, now set dip-switch 1 back to the "Off" position. The HE-106 can be tested by
pressing the "On" button on the remote control.

Deleting Remote Control:

To delete a remote control that has been paired with a HE-106, set dip-switch 1 into
the "On" position and then press the "Off" on the paired remote control. The HE-106
will bleep twice to indicate that the remote control bas been deleted from the
memory of the HE-106, now set dip-switch 1 back to the "Off" position.

HE-106 Memory Reset:

To delete all the remote control units paired with a HE-106, set all the dip-switches
into the "On" position, remove the SX37 from the socket and wait for 10 seconds.
The LED light will stay on and the unit will bleep twice, now set all the dip-switches to
the "Off" position, the led will now flash once every 3 seconds and make a long
continuous bleep. The HE-106 has now been reset.

II IIII IV

HOME

easy

Example Remote control

ON

1 65432

The HE-106 will make 3 short bleeps when a "On/Off" command is
received, while in the test mode the door lock will not operate.
To exit the test mode set dip-switch 2 to the "Off" position.

Product Specification:

Remote Control: HE-106
Input: 12V DC 800mA
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Indoor Use Only

Warning: Never Exceed the Product Specification

Contact: Helpline: 0845 2301 231

Contact Details:

C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR

Tel: [phone]
Fax: [phone]
Web: www.chbyron.com
E-mail:
[e-mail]

HE-Door Lock:
Input: 12Vac~ 300mA
Indoor Use Only

433MHz

R&TTE

APPROVED

IRL

A

B

DK

NL

FIN

F

D

GR

LT

CH Byron Electrical United Kingdom. www.chbyron.com

UK
BG

I

CZ

L

EST
P
E
S

M
N

SK
SLO
CH

H
IS

PL
RO

LV