Homedics WFL-420 Instruction Manual

OCEANSIDE

WFL-420

You no longer have to journey for a relaxing natural
experience.
lets you connect to that same elemental calm by
bringing the sounds of the outdoors into your personal
setting. The running water puts your mind at ease on a
subconscious level, allowing you to regroup and retreat
from the busy world. And the fountain’s pleasing shape
and surrounding stones remind us of what’s important.
Eternal. Unchanging.

A Mirra soothing fountain from HoMedics

REGISTER YOUR FOUNTAIN

Registering your fountain secures the benefits of
your warranty (even if you lose your receipt). It
also makes it easier for us to assist you if you ever
have an issue with your product.

www.homedics.com/product-registration

PARTS AND PIECES

A

B

D

E

A – Fountain top

B – Fountain bottom

UNIQUE FEATURES AND SPECIFICATIONS

Natural water sounds

Soothing sounds create a relaxing ambience.

Unique lighting

Warm glow enhances any environment.

Convenient tabletop size

12.4” x 8.66” x 5.12” for an easy fit on most surfaces.

Adapter voltage

120 VAC, 60Hz

C – Pump

C

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL420

D – Adapter

E – Rocks

HOW TO USE

Instructions

1. Familiarize yourself with the pump. The switch located at the
front of the pump controls the pump speed. The speed is
indicated by a plus (+) and minus (-) sign. To increase the
speed, move the switch slowly to the left in the direction of
the plus sign. At its highest speed level, the switch will cease
to move any farther. To decrease the pump speed for less
water flow, move the switch to the right toward the minus
sign. Similarly, at its lowest speed, the switch will cease to
move any farther.

2. Connect the male and female parts of the LED light connector
and twist cap tightly.

3. Insert the tube into the pump.

4. Fill the base with water up to the fill line. Keep the water filled
to the suggested level at all times for optimum performance.

5. Set the fountain top onto the base.

6. Rinse the rocks with water. Arrange the rocks on
the platform.

7. Attach the AC adapter jack to the base power cord.
DO NOT plug into an outlet at this time.

8. Set the fountain on a level, waterproof surface.

9. Plug the cord into a 120-volt household outlet. The switch
located on the power cord controls the fountain. If the pump
doesn’t operate, click the power button once to turn the
fountain on and once more to turn off.

NOTE: Ensure that the electrical cord loops below the

electrical outlet to form a "drip loop." This will prevent water
from running down the cord into the electrical outlet.

10. For the best results, operate with the pump completely
submerged. Keep the water level at the fill line at all times.

TO CLEAN

1. To clean the pump: Unplug from the electrical outlet. Use a
small brush or stream of water to remove any debris.

2. To keep water clean: Periodically change water and clean
the product according to the water condition. Over time,
fountain water and the fountain itself become dirty. We
suggest cleaning and exchanging water weekly to increase
the longevity of the fountain.

3. To clean off hard water deposits on the base: Soak the base
in a mixture of vinegar and water to clean and remove any
mineral buildup.

4. Keep water at an optimum level: Add water periodically to
keep it at an optimum level to avoid shortening the life of the
pump. Never let the pump run dry.

5. Fountain storage: Unplug the fountain from the electrical
outlet, empty the water, dry the fountain, and store rocks
and fountain in a cool, dry place.

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL420