Homedics WFL-320 Instruction Manual

IMPRESSION

WFL-320

You no longer have to journey for a
relaxing natural experience. A Mirra
soothing fountain from HoMedics lets you
connect to that same elemental calm by
bringing the sounds of the outdoors into
your personal setting.

REGISTER YOUR FOUNTAIN

Registering your fountain secures the benefits of
your warranty (even if you lose your receipt). It
also makes it easier for us to assist you if you ever
have an issue with your product.

www.homedics.com/product-registration

PARTS AND PIECES

A

B

C

D

A – Fountain top
B – Fountain bottom
C – Pump
D – Adapter

UNIQUE FEATURES AND SPECIFICATIONS

Natural water sounds

Soothing sounds create a relaxing ambience.

Unique lighting

Warm glow enhances any environment.

Convenient tabletop size

7.88" x 7.88" x 4.88" for an easy fit on most surfaces.

Adapter voltage

120 VAC, 60Hz

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL320

HOW TO USE

Instructions

1. Familiarize yourself with the pump. The switch located at
the front of the pump controls the pump speed. The speed
is indicated by a plus (+) and minus (-) sign. To increase the
speed, move the switch slowly to the left in the direction
of the plus sign. At its highest speed level, the switch will
cease to move any farther. To decrease the pump speed
for less water flow, move the switch to the right toward
the minus sign. Similarly, at its lowest speed, the switch will
cease to move any farther.

2. Connect the male and female part of the LED light
connector and twist cap tightly.

3. Insert the tube into the pump.

4. Fill base with clean water up to the fill line. Keep the
water filled to the suggested level at all times for optimum
performance.

5. Set the fountain top onto the base.

6.

Attach the AC adapter jack to the base power cord.
DO NOT plug into outlet at this time .

7.

Set the fountain on a level, waterproof surface.

1

8.

Plug the cord into a 120-volt household outlet. The
switch located on the power cord controls the fountain.
If pump doesn’t operate, click the power button once
to turn the fountain on and once more to turn it off.
NOTE: Ensure that the electrical cord loops below the
electrical outlet to form a “drip loop.” This will prevent
water from running down the cord into the electrical
outlet.

9.

For best results, operate with pump completely submerged.
Keep the water level at the fill line at all times.

TO CLEAN

1. To clean the pump: Unplug from electrical outlet. Use a
small brush or stream of water to remove any debris.

2. To keep water clean: Periodically change water and
clean the product according to the water condition.
Over time, fountain water and the fountain itself become
dirty. We suggest cleaning and exchanging water weekly
to increase the longevity of the fountain.

3. To clean off hard water deposits on the base: Soak the
container in a mixture of vinegar and water to clean and
remove any mineral buildup.

4. Keep water at an optimum level: Add water periodically
to keep it at an optimum level to avoid shortening the life
of the pump. Never let the pump run dry.

5. Fountain storage: Unplug the fountain from the electrical
outlet, empty the water, dry the fountain, and store in a
cool, dry place.

6

8

DRIP LOOP

www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL320