6
4. Switch the unit on, selecting high (“2” setting) or low (“1” setting) speed.
5. Lightly apply the attachment to the nail or skin surface.
6. Periodically stop treatment to check your results.
7. When finished, switch unit to the OFF position. Wait for the attachment to
come to a stop, then remove it for storage or replacement.
8. Unplug the adapter from the hand unit and from the outlet.
9. After using, wipe the metal surface of each attachment with a damp cloth
to remove residue.
After Your Manicure or Pedicure
After filing and shaping nails and removing rough skin, you may bathe hands or
feet to rehydrate nails and soften cuticles. Soak your hands or feet in a lukewarm
bath for 15 minutes. Next, massage moisturizer (not included) into the skin and
into each nail, paying close attention to your cuticles. Finally, dry hands or feet
completely and apply the polishing cone to smooth edges and lightly buff nail
surface for added shine.
Tips for Keeping Nails Healthy
To achieve the best results from your Style Spa Elite, follow these guidelines.
• Avoid placing harsh chemicals on nails.
• Avoid exposing hands and feet to cold, dry environments. Always wear protective
clothing in cold temperatures.
• Avoid strong soaps, detergents and excessive washing.
• For best results, do not bathe hands or feet before applying Style Spa
Elite attachments.
• Proper nail hydration is key to strong, healthy nails that resist chipping and splitting. After using Style Spa Elite attachments, soak hands or feet in a warm, soapy,
15-minute bath to restore moisture. Next, rub a light moisturizer (not included)
into your skin, nails and cuticles to soften skin and protect nails.
• To prevent nails from splitting and peeling, wear high-quality nail polish (not
included) to protect against harsh elements and seal in moisture. Polish nails
before applying any moisturizer.
• Avoid changing polish more than twice a month.
• Use shaping discs rather than nail scissors for safer, more controlled nail removal.
• Wait seven to 10 days before re-buffing nails to maintain the thickness of
nail surface.
Using the Built-in Nail Dryer
1. Connect the cord to the plug located on the back of the storage case.
2. Plug the adapter into an outlet.
3. Lay your hands on the nail dryer. Slide hard forward so that fingers are between
the partitions.
NOTE: Make sure not to touch the storage case with wet nails.
4. Press down on the nail dryer platform to activate the dryer. Hold still while air
blows on nails. Remove hand when nails feel dry.
5. To turn nail dryer off, slide your hands away from the nail dryer.
Maintenance
TO STORE
Place attachments into their proper compartments inside the storage case. Store
case in a safe, dry place, out of children’s reach. To avoid breakage, do not wrap the
power cord around the unit. Do not hang the unit by the controller cord.
TO CLEAN
Always unplug before cleaning the unit. Never use liquids or abrasive cleaners to
clean the housing of the unit or the case. Wipe off case with a damp cloth. Clean
attachments periodically using alcohol. Allow attachments to dry before inserting
them into the controller handle.
CAUTION:
WHEN USING
ATTACHMENTS,
STOP TREATMENT
OCCASIONALLY
TO MONITOR
YOUR RESULTS.
NOTE:
DO NOT
OPERATE UNIT
FOR MORE THAN
20 CONTINUOUS
MINUTES AT
ONE TIME.
7
Figure 2