HoMedics IB-WFLRVRB, WFL-RVRB User Manual

GARANTÍA LIMITADA POR UN AÑO

HoMedics vende sus productos con la intención de que no tengan defectos de fabricación ni de
mano de obra por un plazo de un año a partir de la fecha de compra original, con las siguientes
excepciones. HoMedics garantiza que sus productos no tendrán defectos de material ni de mano
de obra bajo condiciones de uso y servicio normales. Esta garantía se extiende únicamente
a consumidores y no a distribuidores.

Para obtener servicio para su producto HoMedics, envíe por correo el producto y su recibo de
compra fechado (como comprobante de compra), con franqueo pago, a la siguiente dirección:

HoMedics Consumer Relations

Service Center Dept. 168

3000 Pontiac Trail

Commerce Township, MI 48390
No se aceptarán pagos contra entrega.
HoMedics no autoriza a nadie, incluyendo, pero sin limitarse a, distribuidores, posteriores

Dirección postal:
HoMedics

Service Center Dept. 168
3000 Pontiac Trail
Commerce Township, MI
48390

Correo electrónico:
[e-mail]

Teléfono:
800-466-3342

©2007 HoMedics, Inc. y sus compañías afiliadas, reservados todos los derechos. HoMedics® es una marca registrada de HoMedics, Inc. y sus

compañías afiliadas. Envirascape™ es una marca comercial de HoMedics Inc. y sus compañías afiliadas. Reservados todos los derechos.

consumidores compradores del producto a un distribuidor, o compradores remotos, a obligar
a HoMedics de forma alguna más allá de las condiciones aquí establecidas. La garantía de este
producto no cubre daños causados por uso inadecuado o abuso, accidente, conexión de
accesorios no autorizados, alteración del producto, instalación inadecuada, reparaciones
o modificaciones no autorizadas, uso inadecuado de la fuente de energía/electricidad, cortes de
energía, caída del producto, funcionamiento incorrecto o daño de una pieza de funcionamiento
debido al no cumplimiento del mantenimiento recomendado por el fabricante, daños durante
el transporte, robo, descuido, vandalismo, condiciones climáticas, pérdida de uso en el período
durante el cual el producto está en una instalación de reparación o a la espera de piezas o
reparación, o cualquier otra condición, sin importar cual sea, que se encuentre fuera del control
de HoMedics.

Esta garantía es válida únicamente si el producto es comprado y operado en el país en el cual
se compró el producto. Un producto que requiera modificaciones o adaptación para habilitar
su funcionamiento en cualquier país que no sea aquél para el que fue diseñado, fabricado,
aprobado y/o autorizado, o la reparación de productos dañados por estas modificaciones no
están cubiertos bajo esta garantía.

LA GARANTÍA AQUÍ ESTABLECIDA SERÁ LA ÚNICA Y EXCLUSIVA GARANTÍA. NO HABRÁ NINGUNA
OTRA GARANTÍA EXPRESA NI IMPLÍCITA, INCLUYENDO NINGUNA GARANTÍA DE COMERCIALIZACIÓN
O APTITUD NI NINGUNA OTRA OBLIGACIÓN POR PARTE DE LA COMPAÑÍA CON RESPECTO A
PRODUCTOS CUBIERTOS POR ESTA GARANTÍA. HOMEDICS NO TENDRÁ RESPONSABILIDAD ALGUNA
POR NINGÚN DAÑO INCIDENTAL, CONSECUENTE NI ESPECIAL. BAJO NINGÚN CONCEPTO ESTA
GARANTÍA REQUERIRÁ MÁS QUE LA REPARACIÓN O CAMBIO DE ALGUNA PIEZA O PIEZAS QUE SE
HALLEN DEFECTUOSAS DENTRO DEL PERÍODO DE VIGENCIA DE ESTA GARANTÍA. NO SE EFECTUARÁN
REEMBOLSOS. SI NO HAY PIEZAS DE REPUESTO DISPONIBLES PARA LOS MATERIALES DEFECTUOSOS,
HOMEDICS SE RESERVA EL DERECHO DE REALIZAR SUSTITUCIONES EN VEZ DE REPARAR O CAMBIAR.

Esta garantía no se extiende a la compra de productos abiertos, usados, reparados, embalados
otra vez y/o abiertos y vueltos a cerrar, incluyendo entre otras cosas la venta de dichos
productos en sitios de remate por Internet y/o la venta de dichos productos por revendedores
o mayoristas. Todas y cada una de las garantías cesarán y terminarán inmediatamente con
respecto a cualquier producto o pieza del mismo que estén reparados, cambiados, alterados
o modificados sin el consentimiento previo explícito y por escrito de HoMedics.

echos legales específicos. Es posible que usted tenga derechos

ciona der

opor

antía le pr

a gar

t

Es
adicionales que pueden variar de un país a otro. Debido a las regulaciones de ciertos países,
es posible que algunas de las limitaciones y exclusiones no se apliquen en su caso.

Por más información con respecto a nuestra línea de productos en los EE.UU.,
visítenos en: www.homedics.com

IB-WFLRVRB

ILLUMINATED TABLETOP RELAXATION FOUNTAIN

El manual en español
empieza en la página 9

Instruction Manual and
Warranty Information

TM

RIVER
BEND

WFL

-RVRB

The sounds of nature soothe
human nature

Thank you for purchasing EnviraScape, HoMedics’ tabletop
relaxation fountain. This, like the entire HoMedics product line,
is built with high-quality craftsmanship to provide you with
years of dependable service. We hope that you will find it to
be the finest product of its kind.

EnviraScape enables you to create an all-encompassing envi­ronment with sound. The sound of flowing water enhances
your environment by releasing negative ions, and promoting
relaxation. Only EnviraScape offers you the luxury of these vital
benefits with its creative design which adds beauty to any
indoor environment.

EnviraScape Features

Innovative, Artistic Design

Enhances the environment at home or at work.

4 Water-flow Speeds

Select the pace that meets your mood.

Durable Electrical Water Pump

Can be operated from any indoor electrical outlet.

Easy to Assemble

Assembles in minutes with simple, illustrated instructions.

IMPORTANT SAFETY INSTRUCTIONS:

When using an electrical appliance, basic precautions should
always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

DANGER

• Always unplug the appliance from the electrical outlet
immediately after using and before cleaning.

• Do not reach for an appliance that has fallen into water.
Unplug it immediately.

• Do not place or store appliance where it can fall or be pulled
into a tub or sink. Do not place in or drop into water or other
liquid.

• Do not connect to any voltage other than that shown on the
pump.

• Do not pump flammable liquids.

• Do not use water above 90

- To reduce the risk of electric shock:

o

F.

CAUTION:
The pump must
be completely
submerged in
water. If the
pump is
making noises,
most likely it is
not completely
submerged in
water.

CAUTION:
Only set the
fountain and
fountain parts
on waterproof
surfaces

WARNING - To reduce the risk of burns, fire, electric shock or

injury to persons:

• An appliance should never be left unattended when plugged
in. Unplug from outlet when not in use and before putting on
or taking off parts or attachments.

• Close supervision is necessary when this appliance is used
by or near children, invalids or disabled persons.

• Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by
HoMedics; specifically any attachments not provided with
the unit.

• Never operate this appliance if it has a damaged cord, plug,
pump, cable or housing. If it is not working properly, if it has
been dropped or damaged, return it to Homedics Service
Center for examination and repair.

• Keep cord away from heated surfaces.

• Never drop or insert any object into any opening.

• Do not operate where aerosol (spray) products are being
used or where oxygen is being administered.

• Do not carry this appliance by supply cord or use cord as
handle.

• To disconnect, remove plug from outlet.

• This appliance is designed for indoor use only.
Do not use outdoors.

SAVE THESE INSTRUCTIONS

Caution – Please read all instructions
carefully before operating.

• Never leave the appliance unattended, especially if children
are present.

• Never cover the appliance when it is in operation.

• This unit should not be used by children without
adult supervision.

• Connect the pump with the proper voltage as indicated
on the pump label.

• Always keep the cord away from high temperature and fire.

• Unplug the pump from power source before cleaning,
maintenance or disassembling.

o get the best flowing effect, product must be placed on a

• T
flat surface and should never be placed on an electrical
appliance.

• Never let pump run dry, as this will shorten life of the pump.

• Do not lift, carry, hang, or pull the pump by the power cord.

• Operate with freshwater only.

• Operate pump completely submerged for proper cooling.

2

3

PUMP

PUMP

PUMP

CAUTION CONTINUED

• The electrical cord of this product cannot be replaced. If it sustains
damage, you must stop using this product immediately and return
it to the HoMedics Service Center for repair. (See the warranty
section for HoMedics address.)

• Disconnect the appliance from outlet before putting hands
into water.

Assembly and Instructions for Use

1. Unpack the product. Wipe off dust with a damp cloth.

2. Familiarize yourself with the pump. The pump speed is controlled
by the dial located at the front of the pump. The speed is
indicated by a “min” and “max” (Fig 1). At its highest speed level,
the dial will cease to move any further. To decrease the pump
speed, move the dial counter-clockwise toward the “min”sign.
Similarly, at its lowest speed, the dial will cease to move any
further.

3. Lead the cord through the cord slot on the bottom of the base.
This will ensure that the unit is balanced when placed on a flat

surface. Attach the A/C adaptor jack to the base power cord.
DO NOT plug into outlet at this time (Fig. 2).

Figure 2

Top Tier

Stones

Figure 1

Base Power
Cord

Switch

LED Light
Connector

Outlet

Middle Tier

LED Light Cord

Cut-Out

Supporting
Poles

Water Supply
Connector

PVC
Tube

Base
Edge

Watermark

Cut-Out

Pump

Platform

Base

Stones

Figure 3

Base Edge

Figure 4

LED Light Socket

LED Light
Connector

Figure 5

Stones

Figure 6

Cut-Out

Water Supply Connector

Larger Hole

Water

Figure 7

Top Tier

Watermark

Drawing on Base

Middle
Tier

4. Place the platform on the supporting
poles of the base (Fig. 2).

5. Insert the PVC tube located under
middle tier into the pump (Fig. 2).

6. Insert the LED light cord through the
small hole located under the middle
tier (Fig. 2).

7. Align the cut-out at the bottom edge
of middle tier with the edge of base
so it sits flat on the base (Fig. 3).
NOTE: Pump position should be
corresponding to the drawing on
base.

8. Insert the LED light connector into
the LED light socket on the bottom of
top tier, and then insert the water
supply connector on the bottom of
top tier into the larger hole of middle
tier (Fig. 4).

9. Add clean water into middle tier
(Approx. 10oz), and then into base
(Approx. 56.5oz). The water level
should be even with the watermark.
Next, arrange the stones provided on
top tier, middle tier and the platform
as desired (Fig. 5).

10. Plug the cord into 120V household
outlet. The fountain is controlled by the
switch located on the power cord. If
pump doesn’t operate, rotate in-line
switch once to turn “on” and once
more to turn “off”.
NOTE: Ensure that the electrical cord
loops below the electrical outlet to form
a ‘Drip Loop’ (Fig. 6). This will prevent
water from running down the cord into
the electrical outlet.

11. As this product has two flowing
directions, unplug the power source
before changing fountain position. To
do so, turn top tier counter clockwise
90 degrees. When water has stopped
flowing from it, switch the fountain
back on (Fig. 7).

Drip Loop

Adaptor

4 5