HoMedics HMDX-C20 User Manual

HMDX Audio Service Center

1.800.466.3342 8:30 – 5:00 p.m. (EST) M – F

Dirección postal: HMDX Audio Consumer Relations

Service Center Dept. 168 3000 Pontiac Trail Commerce Township, MI

48390 Correo electrónico:

cservice@hmdxaudio.com

ARANTÍA LIMITADA POR UN AÑO

MDX AUDIO vende sus productos con la intención de que no tengan defectos de fabricación ni de

H mano de obra por un plazo de un año a partir de la fecha de compra original, con las siguientes excepciones. HMDX AUDIO garantiza que sus productos no tendrán defectos de material ni de mano de obra bajo condiciones de uso y servicio normales. Esta garantía se extiende únicamente a consumidores y no a distribuidores.

Para obtener servicio para su producto HMDX AUDIO, envíe por correo el producto y su recibo de compra fechado (como comprobante de compra), con franqueo pago, a la siguiente dirección:

HMDX AUDIO Consumer Relations Service Center Dept. 168 3000 Pontiac Trail Commerce Township, MI 48390

No se aceptarán pagos contra entrega. HMDX AUDIO no autoriza a nadie, incluyendo, pero sin limitarse a, distribuidores, posteriores

consumidores compradores del producto a un distribuidor, o compradores remotos, a obligar a HMDX AUDIO de forma alguna más allá de las condiciones aquí establecidas. La garantía de este producto no cubre daños causados por uso inadecuado o abuso, accidente, conexión de accesorios no autorizados, alteración del producto, instalación inadecuada, reparaciones o modificaciones no autorizadas, uso inadecuado de la fuente de energía/electricidad, cortes de energía, caída del producto, funcionamiento incorrecto o daño de una pieza de funcionamiento debido al no cumplimiento del mantenimiento recomendado por el fabricante, daños durante el transporte, robo, descuido, vandalismo, condiciones climáticas, pérdida de uso en el período durante el cual el producto está en una instalación de reparación o a la espera de piezas o reparación, o cualquier otra condición, sin importar cual sea, que se encuentre fuera del control de HMDX AUDIO.

Esta garantía es válida únicamente si el producto es comprado y operado en el país en el cual se compró el producto. Un producto que requiera modificaciones o adaptación para habilitar su funcionamiento en cualquier país que no sea aquél para el que fue diseñado, fabricado, aprobado y/o autorizado, o la reparación de productos dañados por estas modificaciones no están cubiertos bajo esta garantía.

LA GARANTÍA AQUÍ ESTABLECIDA SERÁ LA ÚNICA Y EXCLUSIVA GARANTÍA. NO HABRÁ NINGUNA OTRA GARANTÍA EXPRESA NI IMPLÍCITA, INCLUYENDO NINGUNA GARANTÍA DE COMERCIALIZACIÓN O APTITUD NI NINGUNA OTRA OBLIGACIÓN POR PARTE DE LA COMPAÑÍA CON RESPECTO A PRODUCTOS CUBIERTOS POR ESTA GARANTÍA. HMDX AUDIO NO TENDRÁ RESPONSABILIDAD ALGUNA POR NINGÚN DAÑO INCIDENTAL, CONSECUENTE NI ESPECIAL. BAJO NINGÚN CONCEPTO ESTA GARANTÍA REQUERIRÁ MÁS QUE LA REPARACIÓN O CAMBIO DE ALGUNA PIEZA O PIEZAS QUE SE HALLEN DEFECTUOSAS DENTRO DEL PERÍODO DE VIGENCIA DE ESTA GARANTÍA. NO SE EFECTUARÁN REEMBOLSOS. SI NO HAY PIEZAS DE REPUESTO DISPONIBLES PARA LOS MATERIALES DEFECTUOSOS, HMDX AUDIO SE RESERVA EL DERECHO DE REALIZAR SUSTITUCIONES EN VEZ DE REPARAR O CAMBIAR.

Esta garantía no se extiende a la compra de productos abiertos, usados, reparados, embalados otra vez y/o abiertos y vueltos a cerrar, incluyendo entre otras cosas la venta de dichos productos en sitios de remate por Internet y/o la venta de dichos productos por revendedores o mayoristas. Todas y cada una de las garantías cesarán y terminarán inmediatamente con respecto a cualquier producto o pieza del mismo que estén reparados, cambiados, alterados o modificados sin el consentimiento previo explícito y por escrito de HMDX AUDIO.

Esta garantía le proporciona derechos legales específicos. Es posible que usted tenga derechos adicionales que pueden variar de un país a otro. Debido a las regulaciones de ciertos países, es posible que algunas de las limitaciones y exclusiones no se apliquen en su caso.

Por más información con respecto a nuestra línea de productos en los EE.UU., visítenos en:

www.hmdxaudio.com

es una marca registrada de

derechos. iPod®, iPod nano®, nano® y el diseño del iPod® son marcas registradas de Apple Inc.

HMDX AUDIO y sus compañías afiliadas. Reservados todos los

IB-HMDXC20

El manual en español empieza a la página 19

Instruction Manual and Warranty Information

HMDX-C20

Create your perfect sleep environment.

Thank you for purchasing the HMDX Audio C20, the ultimate dock for iPod and relaxation machine. This, like the entire HMDX Audio product line, is built with highquality craftsmanship to provide you years of dependable service. We hope you will find it to be the finest product of its kind.

HMDX Audio helps create your perfect sleep environment. Fall asleep to any of the six calming sounds, then wake to iPod, sounds, radio, or beep tone. The unit can also mask distractions to improve your concentration while you read, work or study.

IMPORTANT SAFETY INSTRUCTIONS:

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

DANGER

• Always unplug the appliance from the electrical outlet immediately after using

• Do not reach for an appliance that has fallen into water. Unplug it immediately.

• Do not place or store appliance where it can fall or be pulled into a tub or sink.

WARNING

• Close supervision is necessary when this appliance is used by or near children,

• Use this appliance only for its intended use as described in this manual. Do not

• Never operate this appliance if it has a damaged cord, plug, cable or housing.

• Keep cord away from heated surfaces.

• Never drop or insert any object into any opening.

- To reduce the risk of electric shock:

and before cleaning.

Do not place in or drop into water or other liquid.

- To reduce the risk of burns, fire, electric shock or injury to persons:

invalids or disabled persons.

use attachments not recommended by HMDX Audio; specifically any attachments not provided with the unit.

If it is not working properly, if it has been dropped or damaged, return it to HMDX Audio Service Center for examination and repair.

Caution: All servicing of this product must be performed by authorized HMDX Audio Service Personnel only.

• Do not operate where aerosol (spray) products are being used or where oxygenis being administered.

• Do not carry this appliance by power cord or use cord as handle.

• To disconnect, remove plug from outlet.

• This appliance is designed for indoor use only. Do not use outdoors.

• Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents.

SAVE THESE INSTRUCTIONS

CCaauuttiioonn –– PPlleeaassee rreeaadd aallll iinnssttrruuccttiioonnss ccaarreeffuullllyy bbeeffoorree ooppeerraattiinngg.

• Never leave the appliance unattended, especially if children are present.

• Never cover the appliance when it is in operation.

• This unit should not be used by children without adult supervision.

• Always keep the cord away from high temperature and fire.

• Do not lift, carry, hang, or pull the product by the power cord.

• If the adaptor sustains damage, you must stop using this product immediately and contact the HMDX Audio Service Center. (See the warranty section for the HMDX Audio address.)

PM Indicator FM Indicator

Alarm Icons

1 Set +/2 Volume 3 Dock for iPod 4 Dimmer 5 Timer 6 Time Set 7 AL Mode 8 AL Set

9 AL1/AL2 10 Sounds 11 Power 12 Audio 13 Snooze/Nap 14 Aux Connection

Cable

15 DC Adapter

16 iPod Inserts (4)

Gen iPod nano

- 2

Gen iPod nano

- 3

- 5thGen iPod 30GB/iPod classic 80GB/iPod touch

Gen iPod 60GB & 80GB/iPod

- 5

classic 160GB

17 AM Antenna

Alarm Clock Radio | dock for iPod

• 6 Nature Sounds: Night, Ocean, Brook, Sunrise, Rain and Water Fall

• Charging docking station for iPod

• Premium quality speakers

• AM/FM radio with digital tuner

• Dual Alarm with Snooze

• Nap and Auto timer options 15, 30, 45 or 60 minutes

• Four wake options - iPod/iPhone, radio, beep or nature sound

• Easy-to-read clock with LCD display

Nature Sound Icons

Figure 2

Locking Tabs

Insert

Dock

Figure 1

AM/FM Antennas

DC Jack

Removal Slot

Pin Connector

AUX Line In Jack

Insert

Figure 3

Figure 4

Before You Begin

The unit uses a backup battery system to provide continuous alarm and clock settings in the event of a power failure. Two “AA” batteries (included) must be inserted into the battery compartment if memory backup is desired. When the backup battery is installed, in the event of a power failure or the DC cord is accidentally disconnected, the LCD display will not remain lit, but the current time and alarm time settings will be temporarily maintained.

Getting Started

Setting Clock Time

1. Press the TIME SET BUTTON located on the top of the unit (Fig. 1); hour digit will begin flashing. Turn the SET +/- KNOB until the current hour is displayed. Remember to set the correct AM or PM (an icon in the upper left of the time display is the PM INDICATOR; there is no AM indicator) (Fig. 2).

2. Press the TIME SET BUTTON again; minute digits will begin flashing. Turn the SET +/- KNOB until the current minute is displayed.

3. Press the TIME SET BUTTON again to exit the clock setting mode or after 5 seconds the display will stop flashing to indicate the time is set.

Install/Replace Backup Battery

1. Make sure the DC adaptor is connected. Otherwise the time setting may be lost during battery replacement.

2. Open the battery compartment cover located on the bottom of the unit.

3. Insert two AA batteries, checking that the positive polarity matches the picture in the battery housing.

4. Close the compartment cover.

BBaatttteerryy PPrreeccaauuttiioonns

1. Use only the size and type of batteries specified.

2. When installing batteries, observe proper +/ – polarities. Incorrect installation of battery may cause damage to unit.

3. Do not mix different types of batteries together (e.g. alkaline with carbon-zinc or old batteries with new ones).

4. If the unit is not going to be used for a long period of time, remove batteries to prevent damage due to possible battery leakage.

5. Do not dispose of batteries in fire. Batteries may explode or leak.

Charging your iPod

Select the correct insert for your particular iPod model from the chart below:

Insert Label iPod Model

2G nano iPod nano 2nd Generation nano-3G iPod nano 3rd Generation

video 30G, 80G classic/touch

video 60G, 160G classic

When you want to connect a different size iPod, remove the insert from the unit and replace with the correct size insert. To remove dock insert, place fingernail in slot on insert (Fig 3) and gently pull up. You must always use the appropriate size insert for your iPod. You may contact HMDX Audio Consumer Relations at 1-800-466-3342 to order the correct insert for your iPod. Note: Make sure you are using the correct insert for your iPod and that it is properly docked in the unit. Failure to do so may damage your iPod.

5G iPod with Video (30GB), U2 iPod with Video, iPod classic (80GB), iPod touch

5G iPod with Video (60GB, 80GB), iPod classic (160GB)

6 7

WARNING: INSERT AND PIN CONNECTOR ARE DESIGNED FOR

APPLE iPOD MUSIC PLAYERS ONLY. ATTEMPTING TO ATTACH OR FORCE ANY NON- iPOD MUSIC PLAYER INTO THE ENCLOSED INSERT OR ONTO THE PIN CONNECTOR WILL

DESTROY YOUR DEVICE.

1. Before you begin, remove your iPod from its case or ‘skin’. Place insert in dock, being sure that the two plastic tabs face the front of the unit. Press insert into place, ensuring it is firmly placed in the dock. Carefully place your iPod into the docking area so that the pin connector in the dock is fully connected to the pin socket on the bottom of your iPod (Fig. 5).

2. Your iPod will then begin charging, until fully charged. NOTE: Your iPod will charge even if the POWER button is turned off. The unit only needs to be plugged in for the iPod to charge.

3. To remove/replace an insert, first remove your iPod, then place fingernail in slot on insert (Fig. 3) and gently pull up.

DAMAGE AND EVEN

Figure 5

Listening to Your iPod

1. Press the POWER BUTTON on the HMDX Audio unit (Fig. 1).

2. Toggle through the AUDIO BUTTON to play the iPod (Fig. 1). The IPOD ICON will appear on the LCD display on the right side of the clock, to indicate that the iPod mode has been selected.

Note: When the iPod is docked and in standby mode, it will automatically begin playing once the iPod mode is selected on the unit.

3. Press the PLAY/PAUSE button on your iPod to pause play; press play again to resume play.

4. Turn the VOLUME KNOB (Fig. 1) on the unit to adjust the system volume.

5. Press the or on your iPod to go to the next or previous track.

6. To turn unit off, press the POWER BUTTON. The iPod will continue charging in the dock.

Listening to a non-docking iPod or other portable audio devices

If you are using an iPod without a docking port, other MP3 player, or other portable audio device, you can play it through the HMDX Audio C20 via the LINE IN located on the back of the unit (Fig. 6).

1. Plug one end of the Connection Cable (included) into the headphone or lineout jack on your audio device and the other end of the Connection Cable into the unit LINE IN, located on the back of the unit.

2. Press the POWER BUTTON on the unit to turn it on (Fig. 1).

3. Toggle through the AUDIO BUTTON on the unit until you reach the auxiliary mode. The AUX ICON (Fig 2) will appear in the right side of the clock, to indicate that the auxiliary mode has been selected.

4. Turn on and play external audio device.

8 9

5. Turn on VOLUME KNOB (Fig 1) on the unit to adjust the system volume.

Note: You may need to adjust the volume on external device also.

6. To turn off the unit, press the POWER BUTTON on the top of the unit.

Note: You may need to turn off your external audio device as well.

Listening to Nature Sounds

1. Press the POWER BUTTON on the unit to turn it on (Fig. 1).

2. Select the Sounds button to toggle through the different nature sounds (Fig 1). They will be shown on the bottom of the LCD display, below the time. (FIg. 2)

3. Turn the VOLUME KNOB on the unit to adjust the volume (Fig. 1).

4. To turn off the nature sounds, press the POWER BUTTON to turn the unit off, or switch the audio mode by pressing the AUDIO BUTTON (Fig. 1).

Note: When the unit is turned on, it will always default to the last mode used.

Figure 6

Listening to the Radio

FM Antenna Extend FM wire antenna fully for best FM reception (do not strip, alter or attach to other antennas).

Antenna

AM Snap the AM loop antenna into the base provided. Next, plug the AM loop antenna into the connecter located on the back of the unit for best AM reception (Fig. 7).

1. Press the POWER BUTTON on the unit to turn it on (Fig. 1).

2. Toggle through the AUDIO BUTTON to play the radio (Fig. 1). The RADIO ICON will appear on the right side of the clock (Fig. 2).

3. To choose between FM or AM radio, press the AUDIO BUTTON again. The FM or AM icon will show on the left side of the clock to indicate the band that is selected (Fig. 2).

4. Turn the SET +/- knob on the unit to tune in the desired station (Fig. 1).

5. Turn the VOLUME KNOB on the unit to adjust the system volume (Fig. 1).

6. To turn off the unit, press the POWER BUTTON.

Figure 7

+ 12 hidden pages