Homedics HDC-MCS-300H Instruction Manual

Display Chair Header & Cushion Set Up Directions

Note: Please apply the display header to an existing HoMedics display chair in your
store. If needed, your buyer may have also ordered new chairs (Model # DS-CHAIR).

Step 3

Once the header is on the display
chair, take model # MCS-300H
from stock and place the HoMedics
massage cushion on the chair.

Step 1

Tab (A)

Take the header card
out from the box and
protection polybag.

Step 2

Insert the tab (A) into
the pocket located on
the back of the chair
as shown.

Final Display

The finished display will look
like this.

NOTE: It is imperative this
display remains powered at
all times. Your buyer has
ordered this display
specifically to help drive
sales.

Use Model # MCS-300H, Shiatsu
Massage Cushion – Traveling
Shiatsu with Vibration – with Heat,
for this header.

IB-HDCMCS300H Display Model # HDC-MCS-300H for use with MCS-300H