
PRODUCT FEATURES:
Removable pumice
stone to smooth and
soften rough skin
Massage nodes.
MAX ll line
Splash guard
INSTRUCTIONS FOR USE:
1. Ensure that the unit is unplugged before lling with water. Fill with warm
water to the MAX ll line located on the inside of the tub.
2. CAUTION: DO NOT FILL WATER OVER THE MAX FILL LINE
NOTE: The foot spa will not heat cold water. For a warm
water massage, ll the unit with warm water.
3. Place the unit on the oor in front of a chair. It is recommended to place the
product on a towel.
4. Plug the unit into a 220-240 AC power supply.
5. Sit down and place your feet in the spa.
6. To operate the unit, press the power button on the top of the product.
7. Enjoy a deep massage by sliding feet back and forth over the stimulating
raised massage nodes on the footspa oor.
8. To turn o, press the button again to deactivate.
9. To empty: First, unplug the unit. Tip the unit, allowing water to pour out
along the rear corner of the footbath. DO NOT pour water over the power
button.
NOTE: DO NOT hold or carry the unit by the removeable splash guard.
MAINTENANCE:
Cleaning
• Unplug the appliance and allow to cool before cleaning. Clean only with a soft,
slightly damp sponge.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner
etc to clean.
• Periodically straighten cord if it becomes twisted.
Power switch
Storage
Place the appliance in its box or in a safe, dry, cool place. DO NOT wrap the power
cord around the appliance. DO NOT hang the unit by the cord.
PLUG: If the plug on this appliance is damaged,
it can be replaced with a BS 1363 plug, tted with
a 3A BS 1362 fuse. The recommended fuse for
this appliance is 3 amp. Care must å taken when
changing the plug. If in doubt, contact a qualied
electrician.
FKA Brands Ltd
Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK
Customer Support: +44(0) 1732 378557 | support@homedics.co.uk
IB-FB55PBGB-0118-01