HoMedics FAC-600-EU Service Manual

THE COMPLETE SKINCARE SOLUTION

Instructions for use

PRODUCT FEATURES

Cleansing brush

MODE INDICATOR LED’S

POWER BUTTON

CHARGING
BASE

CHARGING
PORT

CLEANSING BRUSH

Charging the Brush

1. Connect the charging base to a USB power supply using the USB
power lead provided.

2. Ensure that the brush is switched o.

3. Place the brush into the charging base. The LED’s on the top of the
product will illuminate to indicate remaining charge and will ash
to show that the product is charging.

4. Once the product is fully charged the LED’s will switch o.

5. Charge overnight (8 hours) for up to 80 mins of use time.

Fitting The Brush/Gel Heads

1. Ensure the cleansing bursh is switched o.

2. Push the brush head attachement onto the head of the unit and
twist clockwise until it locks into place with a click.

Removing The Brush/Gel Heads

1. Ensure the cleansing bursh is switched o.

2. Twist the brush head anti clockwise to release

3. See maintenance section for instruction on how to clean

Normal Brush

Sensitive Brush Head

Gel Head

Brush Modes

LED Code Description

l
l l
l l l

Selecting a Brush head

Brush Head Function

Normal
Sensitive
Gel

• 3 Intensity settings, low, high and pulse

• Water resistant unit for use in shower or bath.

• Built in rechargable battery

• Charging stand for easy charging and storage

• Comfort grip for ease of use and total control

USB POWER LEAD

Low vibration
High vibration
Pulsing vibration

Cleansing and Exfoliating
Gentle Cleansing
Moisturising & Massage

2 I GB

Cleansing the Face (Normal & Sensitive Brush Heads)

1. Remove any eye make-up before using this device (It is not
designed for use in the delicate eye area).

2. Attach the appropriate brush head to the device.

3. Wet your skin with warm water.

4. Wet the brush head with warm water and apply a facial cleanser of
your choice to the brush head.

5. Turn the device on, work in circular motions cleanse the skin. Keep
the brush head in contact with to avoid any excess spray from the
device.

Please note: Ensure the skin is kept damp with cleanser/water and
the unit is constantly moving in circular motions to avoid dragging
the skin.

6. Cleanse the face for approximately 10 seconds per cheek, 20
seconds on the forehead and 20 seconds on the nose and chin area.

7. Rinse your face with warm water and gently pat dry with a towel.

New Users: It is recommended to cleanse your face with the sensitive
brush before using the normal brush.
Note: Keep away from eye area.

Moisturising and Massage (Gel Head)

1. Cleanse your face as above.

2. Attach the Gel head to the device.

3. Place a small amount of moisturiser on gel head, switch the device
on and apply the gel head to your skin, working in circular motions
to massage the moisturiser into your skin.

Please note: Keep away from delicate eye area.

MAINTENANCE

Regular care and cleaning is essential to ensure your
Cleansing Brush is in peak working condition.

To Clean

Clean the unit and heads after each use. Clean the outside of the
product using a damp cloth and dry thoroughly. To Clean the gel or
brush heads, remove them form the unit and wash in warm soapy
water. Allow to dry naturally.
Note: Do not use abrasive cleaners. Do not use petroleum based or
ammable cleaning agents because of re risk.
Dependent on use, we recommend that you replace your brush head
every 3-4 months to ensure brush performance is maintained. For
replacement parts, contact your local HoMedics Service Centre. For
details of your nearest HoMedics Service Centre, please go to www.
Homedics.co.uk

To Store

Place the appliance on the charging base in a safe, dry, cool place.
To avoid breakage, do not wrap the charging cable around the
appliance.

GB I 3

FONCTIONS DU PRODUIT :

Brosse nettoyante

VOYANT LED DE MODE

BOUTON
D’ALIMENTATION

BASE DE
CHARGE

Tête de brosse pour peaux sensibles

PORT DE
CHARGE

BROSSE NETTOYANTE

Charger la brosse

1. Branchez la base de charge sur une unité d’alimentation USB à
l’aide du câble d’alimentation USB fourni.

2. Assurez-vous que la brosse est hors tension.

3. Placez la brosse dans la base de charge. Les voyants LED situés sur
le dessus s’allument pour indiquer la mise en charge de l’appareil
et clignotent pour indiquer que l’appareil est en cours de charge.

4. Une fois l’appareil entièrement chargé, les voyants LED

s’éteignent.

5. Se recharge pendant la nuit (8 heures) pour une durée
d’utilisation maximum de 80 minutes.

Fixer la brosse/les têtes pour le gel

1. Assurez-vous que la brosse nettoyante appareil est hors tension.

2. Enfoncez l’accessoire de tête de brosse sur la tête de l’appareil et
tournez dans le sens horaire jusqu’à ce qu’il s’enclenche par un
déclic.

Enlever la brosse/les têtes pour le gel

1. Assurez-vous que la brosse nettoyante appareil est hors tension.

2. Tournez la tête de brosse dans le sens antihoraire.

3. Reportez-vous à la section Entretien pour les consignes de
nettoyage.

• 3 réglages d’intensité, faible, élevé et impulsions

• Appareil étanche pour une utilisation sous la
douche ou dans le bain.

• Batterie rechargeable intégrée

• Base de charge pour une charge et un rangement

Brosse normale

pratiques

• Poignée confortable pour une utilisation facile et
une maîtrise parfaite

Tête de pour gel

CÂBLE D’ALIMENTATION USB

Modes de brosse

Code voyants LED Description

l
l l
l l l

Vibrations faibles
Vibrations élevées
Vibrations par impulsions

Sélectionner une tête de brosse

Tête de brosse Fonction

Normales
Sensibles
Gel

Cleansing and Exfoliating
Gentle Cleansing
Moisturising & Massage

4 I F