Homedics DWS-100 Instruction Manual

Weather Station

Wireless Operation

Instruction Manual and Warranty Information

DWS-100

marca comercial de HoMedics Inc. y sus compañías afiliadas. Reservados todos los derechos.

IB-DWS100

GARANTÍA LIMITADA POR DOS AÑOS (Valid in USA only) (Válida únicamente en los EE.UU.) HoMedics garantiza este producto contra defectos en material y mano de

obra durante el período de dos años a partir de la fecha original de compra con las excepciones que se detallan a continuación.

Esta garantía de producto de HoMedics no cubre daños causados por un uso inadecuado, abuso, accidente, la conexión de accesorios no autorizados, la alteración del producto o cualquier otra condición sin importar cual sea que se encuentre fuera de nuestro control. Esta garantía es válida sólo si el producto es comprado y usado en los EE.UU. Esta garantía no cubre un producto que requiera modificación o alteración para que pueda usarse en cualquier otro país distinto del país por el cual fue diseñado, fabricado, aprobado y/o autorizado, o la reparación de productos dañados a causa de estas modificaciones. HoMedics no será responsable de ningún tipo de daños incidentales, consecuentes o especiales. Todas las garantías implícitas, incluyendo entre otras aquellas garantías implícitas de idoneidad y comerciabilidad, están limitadas a la duración total de dos años a partir de la fecha de compra original.

Para obtener un servicio cubierto por la garantía para su producto HoMedics, puede entregar la unidad personalmente o enviarla por correo junto con su recibo de compra fechado (como prueba de la compra), el franqueo pagado, junto con un cheque o una orden de pago por el monto de $5.00, pagadero a HoMedics, Inc. para cubrir los gastos de manipulación.

Una vez recibido, HoMedics reparará o reemplazará su producto, según lo que sea apropiado y se lo enviará con el franqueo pagado. Si es apropiado reemplazar su producto, lo reemplazaremos con uno igual o comparable, a opción nuestra. La garantía es válida únicamente a través de nuestro Centro de servicio. El servicio realizado a este producto por cualquier otro diferente al Centro de servicio HoMedics anulará la garantía.

Esta garantía le proporciona derechos legales específicos. Es posible que usted tenga derechos adicionales que pueden variar de un estado a otro. Debido a las regulaciones de los diferentes estados, es posible que algunas de las limitaciones y exclusiones no se apliquen en su caso.

Dirección postal:

Envirastation Consumer Relations Service Center Dept. 168 3000 Pontiac Trail Commerce Township, MI 48390

Correo electrónico: cservice@envirastation.com

El manual en español empieza a la página 9

BATTERY INSTALLATION

Lift off the battery cover on the back of the unit. Install 1 AA alkaline battery according to the polarity indicated. Close the battery cover.

After battery installation, the unit will beep then display 12:00 p.m. 1/1/2000 and the room temperature. The time zone will default to PST - Pacific Standard Time.

SETTING TIME

About the Atomic Clock

The National Institute of Standard and Technology (NIST) in Fort Collins, Colorado broadcasts the time signal (WWVB at 60kHz AM radio signal) with an accuracy of 1 second per every 3,000 years. The signal will able to cover over a distance up to 2,000 miles from the source. Like a typical AM radio, your Atomic Clock will not able to receive the WWVB signal in places surrounded by heavy concrete or metal panels. The reception of the time signal can be affected by mobile phones, tv, electrical appliances or other electronic interference. To get the best performance of the Atomic clock, please install the home receiver near a window and away from large metallic objects. If the unit is not working properly, change the unit position. There may be some interference at this location.

TIME ZONE

Press “ ZONE” button to select from the following time zones in the U.S.PST - Pacific Standard Time MST - Mountain Standard Time CST - Central Standard Time EST - Eastern Standard Time

1. Once a Time Zone is selected, your atomic clock will start to receive the signal.

2. While the atomic clock is searching, the icon will change gradually indicating the seek condition.

3. If a valid signal is available, the atomic clock will display the correct local time in about 3 - 5 minutes. The tower icon and “OK” will appear on the display.

4. If the first reception is not successful, the clock will attempt every hour until successful.

5. Try setting the unit in multiple locations for best reception. Remember to place the unit away from sources of interference such as mobile phones, appliances, TV etc.

6. If signal is not available when setting up, you may need to enter the time manually.

MANUAL SETTING FOR CLOCK & CALENDAR

1. Hold “SET ” button for 3 seconds to enter clock set.

2. Select Year - Use the “ + , - ” buttons located on the back of the home receiver to adjust year setting. Press “ SET ” button to confirm your selection.

3. Select Month - Use the “ + , - ” buttons located on the back of the home receiver to adjust month setting. Press “ SET ” button to confirm your selection.

4. Select Day - Use the “ + , - ” buttons located on the back of the home receiver to adjust day setting. Press “ SET ” button to confirm your selection.

5. Select 12 hour or 24 hour setting - Use the “ + , - ” buttons located on the back of the home receiver. Press “ SET ” button to confirm your selection.

6. Select Hour - Use the “ + , - ” buttons located on the back of the home receiver to adjust hour setting. Press “ SET ” button to confirm your selection.

7. Select Minute - Use the “ + , - ” buttons located on the back of the home receiver to adjust minute setting. Press “ SET ” button to confirm your selection.

Fahrenheit/Centigrade Selection - You can now select either Centigrade or Fahrenheit temperature readings. Press “ SET ” button to select between centigrade or fahrenheit readings.

MAINTENANCE AND CARE INSTRUCTIONS

• Extreme temperatures, shock or areas of unusual vibration should be avoided to prevent damage to the unit.

• Clean the unit using only a soft, damp cloth to wipe. Do not use solvents, abrasives, detergents or other strong cleaning agents. After cleaning, wipe surfaces with a dry cloth.

• Do not submerge unit in water or other liquids.

• Do not subject the unit to extremely severe temperatures DO NOT PLACE UNITS INTO OVENS, FREEZERS or MICROWAVE UNITS.

NOTE: Opening the housing of the Unit will invalidate your warranty. Do not attempt to repair this unit – There are no consumer serviceable parts.

TROUBLE SHOOTING

What is the recommended battery type?

Your unit will come with 1 “AA” alkaline battery. We recommend using only alkaline batteries for replacements.

NOTE: Keep the remote sensor out of direct sunlight and rain. Do not set on or next to metal surface.

NOTE: There are no consumer serviceable parts. All questions or service request should directed to our consumer relations department. (See Warranty section for

contact information.

TO TURN DST (Daylight Savings Time) ON/OFF

Hold the “ZONE” button for 2 seconds to switch from DST or ST (Standard Time)*

*In parts of Arizona and Indiana where Daylight Savings Time is not applicable, set to DST off (DST icon will appear on display when DST function is turned on, the clock is ready to get daylight saving time).

SETTING ALARM TIME

1. Hold the “ALARM” button for 2 seconds. Press “+ , - ” to enter the desired Hr/ Min values and press “ALARM” to confirm setting.

2. To view alarm time - Press “ALARM” button. Alarm time will display for 5 seconds and then resume to normal clock thereafter.

3. To select between daily alarm and snooze alarm - Press “ - ” button to turn daily alarm or snooze alarm on/off.

4. The unit will provide either a daily alarm, which last for 2 minutes or a snooze mode where the alarm will repeat every 8 minutes until manually cleared (see SNOOZE/LIGHT section below.)

SNOOZE/ LIGHT

1. Press the SNOOZE/ LIGHT button (on top of unit) for an extended backlight.

2. In snooze alarm mode, press this button to trigger a repetitive 8 minute snooze alarm.

3. When normal alarm mode is selected, press the button to turn off alarm for one day.

+ 5 hidden pages