®
Blood Pressure Monitor
Quick Start Guide
Automatic Wrist
IMPORTANT: THIS QUICK START GUIDE
IS NOT A SUBSTITUTE FOR READING
AND UNDERSTANDING THE
INSTRUCTION MANUAL.
4. Fasten the hook and loop strap securely
so that there is no extra space between
the cuff and your wrist.
1. Install 2 A AA alkaline batteries
according to polarity indications inside
the compar tment. Replace batter y cover.
5. Place your elbow on a table so that the
cuff is at the same level as your heart.
heart level
Relax your entire body, especially
between your elbow and fingers,
and turn your palm up.
COMPLETE INSTRUCTIONS INCLUDED
Read instructions
carefully before use
For more information call:
1-800-466-3342
CVSBPW-610
2. Set date and time using
the and buttons
Press
as shown to the right.
Press
Press
repeat process to set
MINUTE, MONTH, DAY and YEAR
3. Remove all watches, etc. and apply cuff
to left wrist as shown. See instruction
manual for information regarding use
on right wrist.
Press the button
blinking HOUR
increasing HOUR
conrm the entry
6. Press the START/STOP button ( ) and do not move until
measurement is completed.
7. Your measurement results will be displayed.
Hypertension
indicator
Compares readings to
defined levels established
by the U.S. National
Institutes of Health.
Refer to instruction
manual for explanation.
Prehypertension
Stage 1 Hypertension
Stage 2 Hypertension
Systolic pressure
Diastolic pressure
Heart rateTime & date
QS-CVSBPW610
Monitor automático de presión
®
sanguínea para la muñeca
Guía de inicio rápido
IMPORTANTE: ESTA GUÍA DE INICIO
RÁPIDO NO SUSTITUYE LA LECTURA
Y COMPRENSIÓN DEL MANUAL DE
INSTRUCCIONES.
1. Instale 2 pilas alcalinas AAA siguiendo las
indicaciones de polaridad que se
encuentran dentro del compartimiento.
Vuelva a colocar la tapa de las pilas.
4. Ajuste la tira de velcro en forma segura de
modo que no quede espacio entre el
brazalete y su muñeca.
5. Coloque el codo sobre una mesa de modo
que el brazalete quede al mismo nivel que
su corazón. Relaje todo su cuerpo,
especialmente entre el codo y los dedos y
ponga la palma de su mano hacia arriba.
el nivel del
corazón
Se incluyen instrucciones completas
Lea atentamente las
instrucciones antes de usar.
Para obtener más información llame al:
1-800-466-3342
CVSBPW-610
2. Ajuste la fecha y la hora
Presione
usando los botones y
como se muestra a la
derecha.
Presione
Presione
repita el proceso para congurar
3. Quítese el reloj, etc. y colóquese el
brazalete en la muñeca izquierda como
se muestra. Consulte el manual de
instrucciones para ver información sobre
el uso en la muñeca derecha.
Presione el botón
HORA intermitente
aumento de la HORA
conrme la denición
MINUTOS, MES, DÍA y AÑO
6. Presione el botón de INICIO/PARADA ( ) y no se mueva
hasta que se haya completado la medición.
7. Se mostrarán los resultados de su medición.
Indicador de
hipertensión
Compara las lecturas
de los niveles definidos
establecidos por los
Institutos Nacionales de la
Salud de los EE. UU.
Prehipertensión
Etapa 1 de hipertensión
Etapa 2 de hipertensión
Hora y fecha
Presión sistólica
Presión diastólica
Frecuencia
cardíaca
QS-CVSBPW610