HoMedics vende sus productos con la intención de que no tengan defectos de fabricación ni de mano de obra
durante la vida del comprador original a par
siguientes excepciones. HoMedics garantiza que sus productos no tendrán defectos de material ni de mano de
obra bajo condiciones de uso y servicio normales. Esta garantía se extiende únicamente a consumidores y no a
distribuidores.
Para obtener servicio para su producto HoMedics, envíe por correo el producto y su recibo de compra fechado
(como comprobante de compra), con franqueo pago, a la siguiente dirección:
HoMedics Consumer Relations
Service Center Dept. 168
3000 Pontiac Trail
Commerce Township, MI 48390
No se aceptarán pagos contra entrega.
HoMedics no autoriza a nadie, incluyendo, pero sin limitarse a, distribuidores, posteriores consumidores
compradores del producto a un distribuidor, o compradores remotos, a obligar a HoMedics de forma
alguna más allá de las condiciones aquí establecidas.
La garantía de este producto no cubre daños causados por uso inadecuado o abuso, accidente, conexión de
accesorios no autorizados, alteración del producto, instalación inadecuada, reparaciones o
modificaciones no autorizadas, uso inadecuado de la fuente de energía/electricidad, cortes de energía, caída
del producto, funcionamiento incorrecto o daño de una pieza de funcionamiento debido al no cumplimiento del
mantenimiento recomendado por el fabricante, daños durante el transporte, robo,
descuido, vandalismo, condiciones climáticas, pérdida de uso en el período durante el cual el producto está en
una instalación de reparación o a la espera de piezas o reparación, o cualquier otra condición, sin importar cual
sea, que se encuentre fuera del control de HoMedics.
Esta garantía es válida únicamente si el producto es comprado y operado en el país en el cual se compró el
producto. Un producto que requiera modificaciones o adaptación para habilitar su funcionamiento en cualquier
país que no sea aquél para el que fue diseñado, fabricado, aprobado y/o autorizado, o la reparación de productos dañados por estas modificaciones no están cubiertos bajo esta garantía.
LA GARANTÍA AQUÍ ESTABLECIDA SERÁ LA ÚNICA Y EXCLUSIVA GARANTÍA. NO HABRÁ NINGUNA OTRA
GARANTÍA EXPRESA NI IMPLÍCITA, INCLUYENDO NINGUNA GARANTÍA DE COMERCIALIZACIÓN O
APTITUD NI NINGUNA OTRA OBLIGACIÓN POR PARTE DE LA COMPAÑÍA CON RESPECTO A PRODUCTOS
CUBIERTOS POR ESTA GARANTÍA. HOMEDICS NO TENDRÁ RESPONSABILIDAD ALGUNA POR NINGÚN
DAÑO INCIDENTAL, CONSECUENTE NI ESPECIAL. BAJO NINGÚN CONCEPTO ESTA GARANTÍA REQUERIRÁ
MÁS QUE LA REPARACIÓN O CAMBIO DE ALGUNA PIEZA O PIEZAS QUE SE HALLEN DEFECTUOSAS DENTRO DEL PERÍODO DE VIGENCIA DE ESTA GARANTÍA. NO SE EFECTUARÁN
REEMBOLSOS. SI NO HAY PIEZAS DE REPUESTO DISPONIBLES PARA LOS MATERIALES DEFECTUOSOS,
HOMEDICS SE RESERVA EL DERECHO DE REALIZAR SUSTITUCIONES EN VEZ DE REPARAR O CAMBIAR.
Esta garantía no se extiende a la compra de productos abiertos, usados, reparados, embalados otra vez
y/o abiertos y vueltos a cerrar, incluyendo entre otras cosas la venta de dichos productos en sitios de remate
por Internet y/o la venta de dichos productos por revendedores o mayoristas. Todas y cada una de las garantías
cesarán y terminarán inmediatamente con respecto a cualquier producto o pieza del mismo que estén reparados, cambiados, alterados o modificados sin el consentimiento previo explícito y por escrito de HoMedics.
Esta garantía le proporciona derechos legales específicos. Es posible que usted tenga derechos
adicionales que pueden variar de un país a otro. Debido a las regulaciones de ciertos países, es
posible que algunas de las limitaciones y exclusiones no se apliquen en su caso.
Por más información con respecto a nuestra línea de productos en los EE.UU., visítenos en:
una marca registrada de HoMedics, Inc. y sus compañías afiliadas. Smart Sense™ es una marca
registrada de HoMedics Inc. y sus compañías afiliadas. Reservados todos los derechos.
When using your blood pressure monitor, basic precautions
should always be followed. Please read and follow all
instructions and warnings before using this product.
Save these instructions for future reference.
• Please note that this is a home healthcare product only
and it is not intended to serve as a substitute for the
advice of a physician or medical professional.
• Do not use this device for diagnosis or treatment of any
health problem or disease. Measurement results are for
reference only. Consult a healthcare professional for
interpretation of pressure measurements. Contact your
physician if you have or suspect any medical problem.
Do not change your medications without the advice of
your physician or healthcare professional.
• Proper cuff size is critical for accurate measurements.
Follow the instructions in this manual and printed on the
arm cuff to ensure the appropriate size of cuff is being
used.
• This product is not suitable for people with arrythmias. This
device may have difficulty determining the proper blood
pressure for individuals with diabetes, poor
circulation of blood, kidney problems or for users who
have suffered from a stroke.
• The pulse display is not suitable for checking the
frequency of heart pacemakers.
• Electromagnetic interference: The device contains sensitive electronic components. Avoid strong
electrical or electromagnetic fields in the direct vicinity of
the device (e.g. mobile telephones, microwave ovens).
These may lead to temporary impairment of measurement accuracy.
• Use blood pressure monitor only for its intended use.
• Do not wrap the cuff around body parts other than your
arm.
• This unit is intended for use in measuring the blood pressure
and pulse rate of adults. Do not use this device on infants or
those who cannot express their own
consent. This unit should not be operated by children.
• Do not plug or unplug the adapter power cord with wet
hands.
Blood pressure measurements determined with this device
are equivalent to those obtained by a trained observer using
the cuff/stethoscope ausculatory method, within the limits
prescribed by the American National Standard, Manual,electronic, or automated sphygmomanometers.
Blood pressure is the pressure exerted on the artery
walls while blood flows through the arteries. The
pressure measured when the heart contracts and
sends blood out of the heart is systolic (highest)
blood pressure. The pressure measured when the
heart dilates with blood flowing back into the heart
is called diastolic (lowest) blood pressure.
Why Measure Your
Blood Pressure?
Among today’s various health problems, those
associated with high blood pressure are very common.
High blood pressure dangerously correlates with
cardiovascular diseases. Therefore, blood pressure
monitoring is important for identifying those at risk.
Categories for Blood Pressure Levels in Adults
For adults 18 and older who are not on medicine for high blood
pressure, are not having a short-term serious illness, and do not
have other conditions, such as diabetes and kidney disease.
To determine category of risk when systolic and diastolic readings fall
into two areas, use the higher of the two numbers for classification.
There is an exception to the above definition of high blood
pressure for people with diabetes and chronic kidney disease.
A blood pressure of 130/80 mmHg or higher is considered high
blood pressure for those individuals.
This monitor comes equipped with a Risk Category
Indicator to visually indicate the assumed risk level of
each reading based upon these standards. See page
20 for more information on this feature.
BLOOD PRESSURE STANDARD
The U.S. Department of Health and Human Servicesand the National Institutes of Health have developed
a blood pressure standard that identifies areas of lowand high-risk blood pressure. This standard, however
is a general guideline as an individual’s blood pressure
varies among different people, age groups, etc.
It is important that you consult with your physician
regularly. Y
our physician will tell you your normal
blood pressure range as well as the point at which
,
you will be considered at risk.
For reliable monitoring and reference of blood pressure,
keeping long-term records is recommended.
65
NAME/FUNCTION OF EACH PART
HOW THIS BLOOD PRESSURE
MONITOR WORKS
This monitor uses Smart Sense™ Technology to detect
your blood pressure. With one touch of a button, the
cuff will automatically inflate to block the blood flow
through your artery. Next, the deflation process starts.
Smart Sense™ Technology enables the monitor to
automatically inflate and deflate to the appropriate level
for each individual. Please note that any muscle movement during inflation or deflation will cause measurement error. When measurement is complete, the monitor will display your systolic pressure, diastolic pressure, and pulse readings.
Based upon your measurement results, the monitor's
Risk Category Indicator will alert you if your reading
falls into the pre-hypertension, stage 1 hypertension, or
stage 2 hypertension categories. See page 20 for more
information on the Risk Category Indicator.
This monitor also features an irregular heartbeat (IHB)
detector that will alert the user to the presence of an irregular heartbeat. It is strongly recommended that you consult
your physician if the IHB symbol appears often
(five times or more in a row). See page 21 for more information on the IHB Detector.
Air Tube
and Connector
Arm Cuff
Memory Recall Button
S
TART/STOP Button
Other Accessories Included :
Date/Time Set Buttons
(Located on back of unit)
LCD Display
Battery
Cover
(Located
on bottom
of unit)
User-Select Button
4 “AAA” size, 1.5V alkaline batteries
Note: Please unload the batteries
when operating with an AC adapter (not
included) for an extended period
of time.
87
Display Symbols:
DISPLAY EXPLANATIONS
Date/Time
Indicator
Pulse Rate
Systolic
Pressure
Diastolic
Pressure
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
Irregular Heartbeat Detector: Indicates an irregular heartbeat
was detected. See page 21 for more information.
Memory Average: Displays average of last 3 readings
Risk Category Indicator: Compares readings against blood
pressure guidelines. See page 20 for more information.
If any of the following letters and numbers appear in the area that
diastolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.
Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.
Measurement Error: Measurement result exceeds
measurement range. Measure again.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Data Error: Remove and reload the batteries.
Recalibration Alert: Recalibration recommended. See
page 25 for information.
9
10
INSTALLING BATTERIES
1. Press down on latch and lift the battery cover
towards you to open the battery compartment.
. Install or replace 4 “AAA” sized batteries in the
2
battery compartment according to the indications
inside the compartment.
3. Replace the battery cover by clicking in the
bottom hooks first, then push in the top end of
the battery door.
Battery
Cover
Replace the batteries if:
1. The weak battery symbol appears on the display.
. Nothing appears on the display when the power is
2
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores.
Replace the batteries in pairs. Remove batteries when
unit is not in use for extended periods of time.
11
Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
USING THE AC ADAPTER (NOT INCLUDED)
This monitor is designed for operation with batteries or
an optional AC adapter
. Please use only a compatible,
UL approved AC adapter with required voltage and
current as indicated in this manual. Contact HoMedics
Consumer Relations at 1-800-466-3342 to purchase a
compatible AC adapter.
Note: • Please unload the batteries when operating
with an AC adapter for an extended period of
time. Leaving the batteries in the compartment for a long time may cause leakage,
which may lead to damage of the unit.
No batteries are needed when operating with
•
an AC adapter.
Connect the AC adapter with the AC adapter jack in
the back of the unit as shown below.
AC Adapter
Input: 120V 60Hz
Output: 12V DC 500mA
Connect AC
adapter here
12
DATE & TIME SET PROCEDURE
A
RRO
W
MU
S
T FA
LL
W
ITHIN
YE
LL
O
W
B
AND
ARROW MUST FALL
WITHIN YELLOW BAND
9.5
–14
.2
Inc
hes
24–3
6
Cen
timete
rs
Standard
Size Cuff Fits:
Center tube over
middle of arm
MODEL# PP-BPCUFF5
Pos
ition
cuf
f
edg
e
0.
6
˝
–
1.
0
˝
(1.
5
–
2.
5c
m)
abov
e el
bow
.
Center
tu
b
e o
ver
mid
dle
of
arm.
Fit
cuf
f s
ecu
rel
y.
All
ow
roo
m f
or
two
fin
ger
s t
o f
it b
etw
ee
n t
he c
uff
and
you
r a
rm.
1. To adjust the date/time, press the Set button,
located on the back of the monitor.
USING THE ARM CUFF
Very Important: Proper cuff size is critical to accurate
measurement.
This monitor comes with two sizes of arm cuffs:
Standard Size Fits 9.5"–14.2" (24 cm – 36 cm)
Large Size Fits 13.4"–18.1" (34 cm – 46 cm)
2. The display will show a blinking number showing
the month. Change the month by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set buttonagain
to confirm the entry, and the screen will show a blinking number representing the day of the month.
3. Change the date and time as described in Step 2
above, using the button to change the numbers and the Set buttonto confirm the entries.
4. A “0” will reappear as the blood pressure monitor is
ready for measurement again.
Press the button
repeat process to set date and time
blinking month
increasing month
confirm the entry
13
The appropriate cuff is suitable for your use if the
colored arrow falls within the solid color line as
shown below
. If the Arrow falls outside of the Solid
Color Line, you need a cuff with another circumference. For circumferences less than 9.5", contact
HoMedics Consumer Relations.
Colored Arrow
Solid Colored Line
14
1. If the cuff is not assembled, pass the end of the
Po
sition
cuff
edge
0.6˝
–
1.0
˝
(1.5
–
2
.5cm)abo
ve
elbow.
Cen
ter
tu
be
ove
r
mid
dle
of
arm
.
A
RRO
W
M
US
T F
A
L
L
WITHIN
YE
L
L
O
W
BAN
D
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side
without the felt material should be on the inside of
the cuff loop.
End of cuff
3. Open the arm cuff so that your arm may be
placed through it.
4. Remove tight fitting clothing from around
your upper left arm.
5. Position cuff edge 0.8-1.2
inches (2-3cm) above elbow.
D-ring
2. Plug the cuff tube into the left side of the unit.
Insert plug here
15
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm.
8. Lay your arm on a table (palm
upward) so the cuff is at the same
height as your heart. Make sure the
tube is not kinked.
16
Note:
START
STOP
/
START
STOP
If it is not possible to fit the cuff to your left arm, it
can also be placed on your right arm. However
measurements should be made using the same arm.
To use on the right arm, you must position the artery
symbol “ ” over the main artery. Locate the main
artery by pressing with two fingers approximately 1"
(2 cm) above the bend
of your elbow on the
Main Artery
inside of your right arm.
Identify where the pulse
can be felt the strongest.
This is your main artery.
MEASUREMENT PROCEDURE
Important Notes:
• Blood pressure changes with every heartbeat and is
in constant fluctuation throughout the day.
Blood pressure measurement can be affected by the
•
position of the user, his or her physiologic condition
and other factors. For greatest accuracy, wait 1
hour after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking
to measure blood pressure.
• Before measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken
during a relaxed state will have greater accuracy.
, all
You should not be physically tired or exhausted
while taking a measurement.
• During the measurement, do not talk or move
your arm or hand muscles.
• See page 23 for additional notes regarding your
blood pressure measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
1. Press the User Select Button to choose User 1
or User 2.
OR
After the user number is selected, press the
START/STOP button to confirm the chosen user.
. With the cuff wrapped around your arm, press the
2
START/STOP button. Do not inflate the cuff
unless it is wrapped around your arm. All digits will
light up to check the display functions. The checking procedure will be completed after about 2 seconds.
1817
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.