HoMedics BPA-300 User Manual

BPA-300

El manual en español
empieza en la página 34

Deluxe Automatic

Blood Pressure Monitor

©2006 HoMedics, Inc. y sus compañías afiliadas, reservados todos los

derechos. HoMedics es una marca registrada de HoMedics, Inc. y sus

compañías afiliadas. TheraP™ y DK Technology™ son marcas

registradas de HoMedics Inc. y sus compañías afiliadas.

Reservados todos los derechos.

IB-BPA300-A

Por servicio o reparación,
no devuelva esta unidad
al distribuidor. Póngase en
contacto con Relaciones
con el Consumidor de
HoMedics por el:

Correo:
HoMedics, Inc.
Service Center
Dept. 168
3000 Pontiac Trail
Commerce Township,
MI 48390

Correo electrónico:
[e-mail]

Teléfono:
1-800-466-3342
Horario comercial:
8:30am a 5pm Hora
del Este
De lunes a viernes

NINGUNA GARANTÍA DE COMERCIALIZACIÓN O APTITUD NI NINGUNA OTRA
OBLIGACIÓN POR PARTE DE LA COMPAÑÍA CON RESPECTO A PRODUCTOS
CUBIERTOS POR ESTA GARANTÍA. HOMEDICS NO TENDRÁ
RESPONSABILIDAD ALGUNA POR NINGÚN DAÑO INCIDENTAL,
CONSECUENTE NI ESPECIAL.

BAJO NINGÚN CONCEPTO ESTA GARANTÍA REQUERIRÁ MÁS QUE LA
REPARACIÓN O CAMBIO DE ALGUNA PIEZA O PIEZAS QUE SE HALLEN
DEFECTUOSAS DENTRO DEL PERÍODO DE VIGENCIA DE ESTA GARANTÍA. NO
SE EFECTUARÁN REEMBOLSOS. SI NO HAY PIEZAS DE REPUESTO
DISPONIBLES PARA LOS MATERIALES DEFECTUOSOS, HOMEDICS SE
RESERVA EL DERECHO DE REALIZAR SUSTITUCIONES EN VEZ DE REPARAR
O CAMBIAR.

Esta garantía no se extiende a la compra de productos abiertos, usados,
embalados otra vez y o abiertos y vueltos a cerrar, incluyendo entre otras
cosas la venta de dichos productos en sitios de remate por Internet y/o la venta
de dichos productos por revendedores o mayoristas.

Todas y cada una de las garantías cesarán y terminarán inmediatamente con
respecto a cualquier producto o pieza del mismo que estén alterados
o modificados sin el consentimiento previo explícito y por escrito de HoMedics.

Esta garantía le proporciona derechos legales específicos. Es posible que usted
tenga derechos adicionales que pueden variar de un estado a otro. Debido a las
regulaciones de ciertos estados, es posible que algunas de las limitaciones y
exclusiones no se apliquen en su caso.

Por más información con respecto a nuestra línea de productos en los EE.UU.,

visítenos en: www.homedics.com

BPA-300-A.qxd 10/5/06 4:20 PM Page 1

de por vida

garntía limitada

lifetime

limited warranty

21

Important Notes Regarding Your

Blood Pressure Measurement . . . . . . . . . . . . .25

Recalibration Service . . . . . . . . . . . . . . . . . . . .26

Care, Maintenance & Cleaning . . . . . . . . . . . . .27

Potential for Radio/Television Interference . .29

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .30

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .31

Lifetime Limited Warranty . . . . . . . . . . . . . . . .32

TABLE OF CONTENTS

INTRODUCTORY INFORMATION:
Important Product Notices and Safety

Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

About Blood Pressure . . . . . . . . . . . . . . . . . . . .5

What is Blood Pressure?
Why Measure Your Blood Pressure?

Blood Pressure Standard . . . . . . . . . . . . . . . . . .5

How This Blood Pressure Monitor Works . . . . .7

USAGE INFORMATION:

Name/Function of Each Part . . . . . . . . . . . . . . . .8

Display Explanations . . . . . . . . . . . . . . . . . . . . .9

Installing Batteries . . . . . . . . . . . . . . . . . . . . . .11

Using the AC Adapter . . . . . . . . . . . . . . . . . . . .12

Date & Time Set Procedure . . . . . . . . . . . . . . .13

Using The Arm Cuff . . . . . . . . . . . . . . . . . . . . .14

Measurement Procedure . . . . . . . . . . . . . . . . .18

Risk Category Indicator . . . . . . . . . . . . . . . . . .21

Irregular Heartbeat Detector . . . . . . . . . . . . . .22

Recalling Values from Memory . . . . . . . . . . . .23

Clearing Values from Memory . . . . . . . . . . . . .24

BPA-300-A.qxd 10/5/06 4:20 PM Page 1

43

IMPORTANT PRODUCT NOTICES AND SAFETY
INSTRUCTIONS

When using your blood pressure monitor, basic pre­cautions should always be followed. Please read and
follow all instructions and warnings before using this
product. Save these instructions for future reference.

• Please note that this is a home healthcare product
only and it is not intended to serve as a substitute
for the advice of a physician or medical professional.

• Do not use this device for diagnosis or treatment of
any health problem or disease. Measurement results
are for reference only. Consult a healthcare profes­sional for interpretation of pressure measurements.
Contact your physician if you have or suspect any
medical problem.

• Proper cuff size is critical for accurate measurements.
Follow the instructions in this manual and printed on
the arm cuff to ensure the appropriate size of cuff is
being used.

• This product is not suitable for people with arrythmias.
This device may have difficulty determining the proper

blood pressure for individuals with diabetes, poor
circulation of blood, kidney problems or for users
who have suffered from a stroke.

• The pulse display is not suitable for checking the
frequency of heart pacemakers.

• Electromagnetic interference: The device contains
sensitive electronic components. Avoid strong
electrical or electromagnetic fields in the direct vicinity
of the device (e.g. mobile telephones, microwave
ovens). These may lead to temporary impairment of
measurement accuracy.

• Use blood pressure monitor only for its intended use.

• Do not wrap the cuff around body parts other than
your arm.

• This unit is intended for use in measuring the blood
pressure and pulse rate of adults. Do not use this device
on infants or those who cannot express their own con­sent. This unit should not be operated by children.

• Do not plug or unplug the adapter power cord with
wet hands.

Blood pressure measurements determined with this
device are equivalent to those obtained by a trained
observer using the cuff/stethoscope ausculatory
method, within the limits prescribed by the American
National Standard, Manual, electronic, or automated
sphygmomanometers.

BPA-300-A.qxd 10/5/06 4:20 PM Page 3

65

Categories for Blood Pressure Levels in Adults

This monitor comes equipped with a Risk Category
Indicator to visually indicate the assumed risk level of
each reading based upon these standards. See page
21 for more information on this feature.

It is important that you consult with your physician
regularly. Your physician will tell you your normal
blood pressure range as well as the point at which
you will be considered at risk.

For reliable monitoring and reference of blood pressure,
keeping long-term records is recommended.

ABOUT BLOOD PRESSURE

WWhhaa tt iiss BBlloooodd PPrr eessssuurree??

Blood pressure is the pressure exerted on the artery
walls while blood flows through the arteries. The
pressure measured when the heart contracts and
sends blood out of the heart is systolic (highest)
blood pressure. The pressure measured when the
heart dilates with blood flowing back into the heart
is called diastolic (lowest) blood pressure.

WWhhyy MMeeaassuu rree YY oouurr
BBlloooodd PPrree ssssuurree??

Among today’s various health problems, those
associated with high blood pressure are very common.
High blood pressure dangerously correlates with
cardiovascular diseases. Therefore, blood pressure
monitoring is important for identifying those at risk.

BLOOD PRESSURE STANDARD

The U.S. Department of Health and Human Services
and the National Institutes of Health have developed
a blood pressure standard that identifies areas of low­and high-risk blood pressure. This standard, however,
is a general guideline as an individual’s blood pressure
varies among different people, age groups, etc.

For adults 18 and older who are not on medicine for high blood
pressure, are not having a short-term serious illness, and do not
have other conditions, such as diabetes and kidney disease.

To determine category of risk when systolic and diastolic readings fall
into two areas, use the higher of the two numbers for classification.

There is an exception to the above definition of high blood
pressure for people with diabetes and chronic kidney disease.
A blood pressure of 130/80 mmHg or higher is considered high
blood pressure for those individuals.

Systolic (mmHg) Diastolic (mmHg)

Stage 2 Hypertension >160 >100
Stage 1 Hypertension 140~159 90~99
Prehypertension 120~139 80~89
Normal <120 <80

__

BPA-300-A.qxd 10/5/06 4:20 PM Page 5

87

HOW THIS BLOOD PRESSURE
MONITOR WORKS

This monitor uses advanced DK Technology™ to
detect your blood pressure. With a microphone built
into the arm cuff, DK Technology™ actually listens like
your doctor when taking a reading. Exclusive DK
Technology™ delivers accurate measurements by using
both pressure and sound. With one press of a button,
the device will automatically inflate to measure your
systolic pressure. It will then begin deflating to measure
your diastolic pressure. When the measurement is
completed, it will display your systolic pressure,
diastolic pressure, and pulse readings.

Based upon your measurement results, the monitor's
Risk Category Indicator will alert you if your reading
falls into the pre-hypertension, stage 1 hypertension, or
stage 2 hypertension risk categories. See page 21 for
more information on the Risk Category Indicator.

This monitor also features an irregular heartbeat (IHB)
detector that will alert the user to the presence of an irregu­lar heartbeat. It is strongly recommended that you consult
your physician if the IHB symbol appears often (five
times or more in a row). See page 22 for more information
on the IHB Detector.

NAME/FUNCTION OF EACH PART

Other Accessories Included :

LCD Display

Battery
Cover

Memory Recall
Button

START/STOP Button

User-Select Button

Cuff Tube
and Connector

(Located

on bottom
of unit)

Date/Time
Set Buttons

(Located on back of unit)

1 12V DC Output AC Adapter and
4 “AA” size, 1.5V alkaline batteries
Note: Please unload the batteries when
operating with the AC adapter for an
extended period of time.

Arm Cuff

BPA-300-A.qxd 10/5/06 4:20 PM Page 7

10

9

User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.

Weak Battery Symbol: Appears when batteries should be

replaced.

Pulse Symbol: Shows the pulse rate per minute.

Irregular Heartbeat Detector: Indicates an irregular heartbeat

was detected. See page 22 for more information.

Memory Average: Displays average of last 3 readings

Risk Category Indicator: Compares readings against blood

pressure guidelines. See page 21 for more information.

DISPLAY EXPLANATIONS

Systolic
Pressure

Diastolic
Pressure

Date/Time Indicator

Display Symbols:

Pulse Rate

Measurement Error: Measure again. Wrap the cuff
correctly and keep arm steady during measurement.

Air Circuit Abnormality: Check cuff connection. Measure again.

Pressure Exceeding 300 mmHg: Turn the unit off to clear,

then measure again.

Data Error: Remove and reload the batteries.
Recalibration Alert: Recalibration recommended. See

page 26 for information.

If any of the following letters and numbers appear in the area that
diastolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.

BPA-300-A.qxd 10/5/06 4:20 PM Page 9

12

11

As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores.
Replace the batteries in pairs. Remove batteries when
unit is not in use for extended periods of time.

Note: Batteries are hazardous waste. Do not dispose

of them together with the household garbage.

USING THE AC ADAPTER

Note: • Please unload the batteries when operating

with the AC adapter for an extended period
of time. Leaving the batteries in the compart­ment for a long time may cause leakage,
which may lead to damage of the unit.

• No batteries are needed when operating with
the AC adapter.

1. Connect the AC adapter with the AC adapter jack
in the back of the unit as shown below.

2. Please use only the AC adapter included with
this monitor.

AC Adapter

Input: 120V 60Hz 15W
Output: 12V DC 600mA

Connect AC
adapter here

INSTALLING BATTERIES

Note: It is recommended that you use batteries only

for travelling or when it is not possible to use the
AC adapter.

1. Extend the tray so that the battery cover is fully
exposed.

2. Press down on latch and lift the battery cover
towards you to open the battery compartment.

3. Install or replace 4 “AA” sized batteries in the
battery compartment according to the indications
inside the compartment.

4. Replace the battery cover by clicking in the
bottom hooks first, then push in the top end of
the battery door.

Replace the batteries if:

1. The weak battery symbol appears on the display.

2. Nothing appears on the display when the power is
switched on.

Battery
Cover

Slide-Out
Tray

BPA-300-A.qxd 10/5/06 4:20 PM Page 11

DATE & TIME SET PROCEDURE

1. To adjust the date/time, press the Set button ,

located on the back of the monitor.

2. The display will show a blinking number showing
the hour. Change the hour by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button again
to confirm the entry, and the screen will show a blink­ing number representing the minutes.

3. Change the time and date as described in Step 2
above, using the button to change the num­bers and the Set button to confirm the entries.

4. A “0” will reappear as the blood pressure monitor is
ready for measurement again.

13

Press the button

blinking hour

increasing hour

confirm the entry

repeat process to set time and date

14

USING THE ARM CUFF

Very Important: Proper cuff size is critical to accurate
measurement.

This monitor comes with two sizes of arm cuffs:
Standard Size Fits 9.5"–14.2" (24 cm – 36 cm)
Large Size Fits 13.4"–18.1" (34 cm – 46 cm)

The appropriate cuff is suitable for your use if the
colored arrow falls within the solid color line as shown
below. If the Arrow falls outside of the Solid Color Line, you

need a cuff with another circumference. For circumferences
less than 9.5", contact HoMedics Consumer Relations.

A

R

R

O

W

M

U

S

T

F

A

L

L

W

I

T

H

I

N

Y

E

L

L

O

W

B

A

N

D

Solid Colored Line

Colored Arrow

BPA-300-A.qxd 10/5/06 4:20 PM Page 13

P

o

s

i

ti

o

n

c

u

f

f

ed

g

e 0

.

6

˝

–

1

.0

˝

(1

.5

–

2

.

5

c

m

)

a

b

o

v

e

el

b

o

w

.

Standard

ARROW MUST FALL

WITHIN YELLOW BAND

Ce

nt

e

r

t

ube

m

id

d

l

e of

Center tube over
middle of arm

Size Cuff Fits:

9

.5

–

14

.2

In

c

h

e

s

2

4

–

3

6

C

e

n

t

im

e

te

ec

u

re

l

y

.

Al

s

t

o

f

i

t

b

a

r

m.

MODEL# PP-BPCUFF5

rs

l

o

w

ro

o

m

f

o

r

etwe

e

n

t

h

e

c

u

f

f

Fit

cu

f

f

s

o

v

er

tw

o

f

ing

er

a

r

m

.

an

d

y

o

u

r

3. Open the arm cuff so that your arm may be placed
through it.

4. Remove tight fitting clothing from around
your upper left arm.

5. Position cuff edge 0.8-1.2
inches (2-3cm) above elbow.

6. Center tube over middle of arm.

7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm.

8. Lay your arm on a table (palm upward)
so the cuff is at the same height as your
heart. Make sure the tube is not kinked.

16

15

1. If the cuff is not assembled, pass the end of the
cuff furthest away from the tubing through the metal
D-ring in order to form a loop. The smooth side
without the felt material should be on the inside of
the cuff loop.

2. Plug the cuff tube into the left side of the unit.

P
o

s
it
io
n

cuf

f

edg

e 0
.6

˝

–

1
.0

˝

(

1.
5

–

2
.
5
c
m)

ab

o
ve
el

b
ow

C
en

t
e
r

tu
b

e ov

e
r

m
id
d

le
of a

r
m

.

Insert plug here

A

R

R

O

W

M

U

S

T

F

A

L

L

W

I

T

H

I

N

Y

E

L

L

O

W

B

A

N

D

D-ring

End of cuff

Felt Material
on the outside
of cuff

BPA-300-A.qxd 10/5/06 4:20 PM Page 15

1817

MEASUREMENT PROCEDURE

Important Notes:

• Blood pressure changes with every heartbeat and is
in constant fluctuation throughout the day.

• Blood pressure measurement can be affected by the
position of the user, his or her physiologic condition
and other factors. For greatest accuracy, wait 1
hour after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking
to measure blood pressure.

• Before measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken
during a relaxed state will have greater accuracy.
You should not be physically tired or exhausted
while taking a measurement.

• During the measurement, do not talk or move your
arm or hand muscles.

• See page 25 for additional notes regarding your
blood pressure measurement.

Note:

If it is not possible to fit the cuff to your left arm, it
can also be placed on your right arm. However, all
measurements should be made using the same arm.
To use on the right arm, you must position the artery
symbol “ ” over the main artery. Locate the main
artery by pressing with two fingers approximately 1"
(2 cm) above the bend
of your elbow on the
inside of your right arm.
Identify where the pulse
can be felt the strongest.
This is your main artery.

Main Artery

BPA-300-A.qxd 10/5/06 4:20 PM Page 17

2019

3. After all symbols disappear, the display will

show a blinking “0”. The monitor is “Ready to
Measure” and will automatically inflate the
cuff to start measurement.

4. Once your systolic pressure is determined, the monitor

will begin deflating to measure your diastolic pressure.

Note: This monitor will re-inflate automatically if the

system detects that your body requires more
pressure for measurement.

5. When the measurement is completed, the cuff will

deflate entirely. Systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically

stored into memory.

1. Press the User Select Button to choose User 1

or User 2.

After the user number is selected, press the
START/STOP button to confirm the chosen user.

2. With the cuff wrapped around your arm, press the

START/STOP button. Do not inflate the cuff unless it
is wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 2 seconds.

START

STOP

/

OR

BPA-300-A.qxd 10/5/06 4:20 PM Page 19