from anodized aluminum with a powder
This product has a maximum user weight of
DN7010
–
Low Grip Tub Safety Bar
Stock Number:
_____________Low Gri
p Tub Safety Bar
Materials:
Installation Instructions:
Dimensions:
DN7010
Home Care Technical Specification
Low Grip Tub Safety Bar
Stock Numbers:
q
White
Photo Box Packaging with Handle
Low Grip Tub Safety Bar is made
coat white finish.
WARNING
250lbs. Contact CSI Customer Service
immediately at 1-800-882-0116 if any
components are damaged or missing.
Making substitutions or modifying this
product in any way will void your warranty.
CSI assumes no liability for any damage or
injury caused by improper assembly,
installation or use of this product.
1. Loosen A and B bolts to allow bar and clamps to be adjusted
to your tub.
2. Position the clamps to fit snugly against the sides and top rim
of the tub and then adjust B bolt. Do not tighten yet.
3. Use the wrench provided to tighten A bolts so that the clamps
are angled correctly for your tub.
4. Tighten B bolts firmly so that the clamp pads make secure,
continuous contact with both sides of the tub walls.
Retighten A and B bolts as necessary.
By CSI Bath Furnishings
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 (800) 321-8809 •
FAX: (800) 848-6636 • INTERNATIONAL: (440) 962-2000 •
Copyright CSI Bath Furnishing Division of Moen 02/22/01
Loading...