Home Automation RC-90BZ, RC-90B User Manual
O M N I S T A T
ELECTRONIC COMMUNICATING THERMOSTAT
:
COOL
P
AUTO
DAY
Owner's Manual
RC-90B / RC-90BZ
Single Stage Heat/Cool
for Zone Control Systems
Document Number 13R00-28
May, 2007
Copyright © 1999-2007 Home Automation, Inc.
All Rights Reserved
CONTENTS
INTRODUCTION ............................................................................................. 1
DESCRIPTION.................................................................................................. 1
MAINTENANCE...............................................................................................1
OPERATION .....................................................................................................2
DISPLAY ............................................................................................................ 4
FILTER REMINDER .......................................................................................6
ANTICIPATION ............................................................................................... 6
SETTING THE CURRENT TIME AND DAY .............................................. 7
PROGRAMMING ................................................................................... 8
SETTING TIME SCHEDULES....................................................................... 9
DAY/NIGHT MODE............................................................................. 10
PROGRAMMABLE ENERGY SAVER MODE (PESM) ...............10
SYSTEM MODE.................................................................................... 11
AUTOMATIC TIME UPDATE........................................................... 11
This thermostat is Listed by Underwriter's Laboratories and
UL Canada.
This thermostat has been tested and found to comply with the
requirements of the European Union for Electromagnetic
Interference, Electromagnetic Immunity and Safety under the
applicable EMI and Low Voltage Directives and Standards.
FCC
This thermostat has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
This product generates and can radiate radio frequency energy.
Due to its low power design, it is unlikely to interfere with
radio and TV communications. If it is suspected of doing so,
the user is encouraged to try to correct the problem by
reorienting the receiver's antenna, moving the receiver away
from the product, or consulting an experienced radio/TV
technician for help.
As an EPA ENERGY STAR Partner, Home Automation, Inc. has
determined that this thermostat meets the ENERGY STAR guidelines
for energy efficiency.
INTRODUCTION
Thank you for purchasing your new RC-90 electronic communicating
thermostat. Your thermostat will provide you with comfort,
convenience, and energy savings for years to come.
We hope that you take a few moments to become familiar with all of
the features of this fine product by reviewing this manual. Please keep
this manual on file for future reference.
DESCRIPTION
The RC-90 is a precision digital thermostat for single stage heating
and cooling systems. It has the capability of being controlled both
locally and by remote control. It offers programmability, stand-alone
operation, and robust communications with automation systems,
utility control systems, and personal computers.
There are several items that can be configured at the time of
installation. These items have a check box () for your installer to
indicate which features are used in your system.
The RC-90 can act as the Master thermostat in a zoned heating
and cooling system. Setting the Master thermostat to HEAT mode
will allow it and the other zones to heat. Setting the Master to COOL
will allow it and the other zones to cool. Setting the Master to OFF
will turn off all other zones.
MAINTENANCE
Your new thermostat is maintenance free. There is no battery to
install or replace. If necessary, clean unit carefully with a mild soap
solution on a soft cloth.
1
OPERATION
To take advantage of all the benefits and features offered by your
thermostat, we recommend that you start by becoming familiar with
its operation.
:
P
DAY
COOL
AUTO
1- Display
The Display is used to show current time, temperature, outdoor
temperature (optional), mode, and to give useful information that
will guide you through normal operation of your thermostat.
2- Hold
Press the Hold key to set the system into Hold mode. In Hold
mode, the thermostat will not change its settings by program.
3- Prog
Press the Prog (programming) key to set the current time and day
(hours, minutes, day of week), and to program the temperature
time schedules for the MORN, DAY, EVE, and NITE periods.
2
Loading...