User Manual
Mini Cube HD Camera
(IPC2202)
Note:
1. Power up the Mini Cube HD Camera first.
2. The LED indicator will blink purple and then blink blue.
3. The default Mode is “Internet Mode”.
Activation
LED indicator
Activation
In the App sidebar menu, tap “Device
Management”, tap “+” in upper-right corner, and
then select “IP Camera ”.
2 1 3
Notice: The device activation steps are only for adding new devices.
With Shuttle/OPU (Internet Mode)
Follow the instructions shown and press “Next”.
Scan the QR code on the back of the camera.
The activation process takes around 1 to 2 minutes.
Once the camera has been successfully added, “New
Camera has been added successfully” will appear on
the App. You can find a New Camera icon in your
Camera List.
The LED indicator will turn
solid blue now.
Camera Setting
In “Device Management”,
tap the camera that you
would like to edit.
On the “Edit Camera” page, you can:
1
1
Change Display Name
2
3
Set Motion Detection Sensitivity
You can move the slider icon freely to
set the Video Motion Detection
Sensitivity from 0% to 100%.
Set Live Video Resolution
The Live Video Resolution can
be set to HD, High or Medium.
4
Turn ON/OFF Camera
2
3 4
ON
OFF
The camera will
continue to trigger
or record any
events when it is
turned off.
Set Continuous Recording
With the above completed, in the
“Edit Camera” page, you can turn
on the Continuous Recording
function to record motion-detected
video clips of up to 3 minutes each.
Before enabling the video
Continuous Recording function, a
Micro SD card has to be inserted
into the Mini Cube HD Camera first.
Video Motion Detection level
needs to be above 0% to trigger
continuous recording.
Micro SD card*
Whether in Armed, Disarmed, or Stay Mode
status, once motion is detected by the camera,
Continuous Recording will be triggered.
Notification and Checking
In Armed status, whenever
motion is detected by the camera,
the owner and authorized users
will get a push notification of
“Motion detected”.
Check the eventtriggered recordings of
30 seconds
Notification
Check
live video
Video Checking
Replay Continuous Recording
Find the “VideoGram” tile and select the event you
want to check.
Tap the Replay icon to watch an EventTriggered/Motion-Detected Continuous Recording
of up to 3 minutes each.
2 1 3
On the “Replay” page:
Use the arrows here to
move the time indicator
to change the time from
the period shown that
you would like to watch.
Use the arrows here to
change the date and time
period.
Time indicator.
Other information
LED Indicator
• Blue – Power on
• Purple – WLAN is connected
Reset
A hard reset will restore your
device to factory default settings.
Press the reset button on the side
of device with a pin till you hear a
“Beep”.
Loading...