Home TG76P4817D01 User Manual

Christmas Tree

Open the protective cover

Model: TG76P4817D01

Sku # 1002 469 140

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed, including the following:

READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

b. Do not use seasonal products outdoors unless marked

suitable for indoor and outdoor use. When products are

used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper

installation.

c. This seasonal product is not intended for permanent

installation or use.

d. Do not mount or place the product near gas or electric

heaters, fireplaces, candles, or other similar sources of

heat.

e. Do not secure the wiring of the product with staples or

nails, or place on sharp hooks or nails.

f. Do not let lamps rest on the supply cord or on any wire. g. Unplug the product when leaving the house, when

retiring for the night, or if left unattended.

h. This is an electric product and not a toy! To avoid risk of

fire, burns, personal injury and electric shock it should not

be played with or placed where small children can reach it.

i. Do not use this product for other than its intended use. j. Do not hang ornaments or other objects from cord, wire,

or light string.

k. Do not close doors or windows on the product or exten

sions cords as this may damage the wire insulation.

l. Do not cover the product with cloth, paper, or any materi

al that is not a part of the product when in use.

m. This product is equipped with push-in type lamps. Do not

twist lamps.

n. Read and follow all instructions that are on the product or provide with the product.

SAVE THESE INSTRUCTIONS

Pre-Assembly

Package Contents

Part Description Quantity

A Tree top, tag 3 1 B Tree center, tag 2 1 C Tree bottom, tag 1 1 D Tree stand 1

Assembly

Assembling the tree stand

Step 1

. Choose a location near a wall outlet.

Step 2

. Unfold the legs and lay the stand in a flat area. Then

slide the locking disc downward and snap into place.

Step 3

. When inserting the bottom section of the tree into the assembled stand, thread the eyebolt into the stand and tighten until the pole is firmly secured.

Eye Bolt

Assembling the tree This tree assmebles with Quick Set® technology

---Set up and light up your tree in less than 10 minutes!

Step 1

. Remove the protective caps from the tree bottom

and insert the pole into the tree stand.

Step 2

. Continue by inserting the upper tree section(s) to

the lower section(s) until inserting the tree top.

Step 3

. Shape the branches to your preference by working

ensure that all wires are free of branch hinges.

Step 4

should now be lit.

Step 5

upsweep all branch tips for a uniform look.

from the bottom to the top. When adjusting branches,

. Insert the adaptor into the wall outlet. All your lights

. When finished shaping the branches, slightly

*Electrical Rating For The Tree (For Indoor Use Only)

Input:120V, 60Hz, 0.28A Max. Output: 29V 0.6A

Section 3

100S

80S

Do Not Tamper Internal Parts

USER SERVICING INSTRUCTIONS

LAMP REPLACEMENT Step 1. Grasp the power adapter or power cord plug, and than

unplug from the power outlet. Do not pull the power cord.

Step 2. Lift up lamp lock tab, then pull the

lamp and plastic lamp base straight out of the lamp-holder.

Step 3.

Replace with a new spare lamp

provided with this product.

( Reference figure only)

Section 2

Section 1

100S

90S

100S

Do Not Tamper Internal Parts

Foot Pedal

on/off Switch

To Be Plugged

Adaptor

Into Wall

Outlet

Christmas Tree

Model: TG76P4817D01

Sku # 1002 469 140

Operation

Turning on the tree

NOTE: If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose, or missing bulbs. Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree.

Step 1. Connect the light strings of the tree together and plug the power cord into a wall outlet.

Step 2. If the tree comes with a foot pedal, step on the On/Off button.

Maintenance

Spare parts

This tree package includes hinge pins, washers and bulbs for any replacement or repair that you need to perform on your tree. If extra parts are needed, contact the Customer Service Team at 1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday through Friday.

Repairing Loose Hinges

Step 1. Place the branch into the slot of the bracket Step 2. Insert a new hinge pin through the holes of the

bracket and secure with a washer.

INSTALLATION AND REPLACEMENT OF BATTERIES – REMOTE CONTROLLER:

• Use ONLY AAA size (LR03) batteries.

• For longer battery life, use alkaline batteries.

• WARNING: CHOKING HAZARD - AAA BATTERIES ARE SMALL PARTS, KEEP AWAY FROM CHILDREN.

• Do not expose light set to moisture.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (Carbon - Zinc), lithium, or rechargeable (NiCd, NiMH or other type) batteries.

• Remove batteries when not used for an extended period of time, or when depleted.

• Dispose of used batteries properly by following directions on batteries.

• Clean the battery contacts prior to battery installation.

Use and Care Instructions

1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclo sures, loose connections, or exposed copper wire.

2. Before disassembling the tree, unplug the tree and remove all ornaments and decorations.

3. Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole.

4. Repeat this step for the center and bottom tree sections.

5. When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product

conductors, connections, and wires. Cover the protective

cap on the poles to avoid damaging

the internal parts.

6. When not in use, store neatly in

a cool, dry location protected from sunlight.

User servicing instructions

HOW TO USE THE DUAL COLOR LIGHT CONTROLLER AND REMOTE CONTROL:

Press A selector button on the “Dual Color Light Controller” or “Remote Controller” to select among:

(1) CLEAR AND MULTI-COLOR ALTERNATING; (2) CLEAR LIGHTS; (3) MULTI LIGHTS

A selector

button

CAUTION: Use only power adaptor that was

provided with this product. Using a different power adaptor will damage the lights and cause fire, electrical

shock hazard.

Troubleshooting

Problem Solution

Ensure that all tree sections are plugged into each other and that the tree is plugged into the wall. If your

The tree does not light

tree came with a foot pedal, step on the On/Off button.

Check for loose, broken, or missing bulbs and replace as needed with the replacement bulbs provided

Press B selector button on the “Dual Color Light Controller” or “Remote Controller” to select among:

(1) COMBO (2) STEADY (3) SHIMMER (4) STARFIELD (5) CHASER (6)LIGHTING (7) STACKER

B selector

button