Home FIDWB14 User Manual

User ManualUser Manual

User Manual

60cm Fully Integrated Dishwasher

FIDWB14

Product / Installer details

For future reference we suggest that you staple a copy of your purchase receipt here and complete the below so the
information is always at hand.

Product Details

Model number: ________________________________________________________________________________________

Description: ___________________________________________________________________________________________

Serial number: _________________________________________________________________________________________

(Located on the product rating label)

Purchase Details

Date of purchase: ______________________________________________________________________________________

Place of purchase: _____________________________________________________________________________________

Store name: ___________________________________________________________________________________________

Address: ______________________________________________________________________________________________

Telephone: ____________________________________________________________________________________________

Invoice / receipt number: ________________________________________________________________________________

Installation Details

Electrical date of installation: ___________________________________________________________________________

Electrician Installers Details: Company / Installers Name: _____________________________________________

Licence Number: ______________________________________________________

Telephone Number: ____________________________________________________

Gas date of installation: _________________________________________________________________________________

Gas installers details: Company / Installers Name: _____________________________________________

Licence Number: ______________________________________________________

Telephone Number: ____________________________________________________

Plumbing date of installation: ___________________________________________________________________________

Plumbers installers details: Company / Installers Name: _____________________________________________

Licence Number: ______________________________________________________

Telephone Number: ____________________________________________________

Dear Customer,

Congratulations on the purchase of your new product from
Home Appliances Pty Ltd.

We recommend you please take some time to read the instruction manual
thoroughly to familiarise yourself with the functionality and operations to ensure
optimum performance of your new appliance.

After reading the manual, please store it in a safe and accessible location for
future reference.

Installation

The installation of your new appliance must be carried out by a qualied
installer / technician in accordance to local regulations.

The packaging of your appliance has been selected from environmentally
friendly materials and can usually be recycled. Please ensure these are disposed
of correctly.

Customer Care

Our Customer Care centre is available should you wish to learn more about your
appliance in relation to how to use it to its best potential, or tips on cleaning as
well as available accessories.

For further details please contact our Customer Care team on
1800 444 357 or email: [e-mail]

Thank you

Regards,
Home Appliances

Please read this user manual first!

Dear Customer,
We hope that you get the best results from your product which has been
manufactured with high quality and state-of-the-art technology. Therefore,
please read this entire user manual and all other accompanying documents
carefully before using the product and keep it as a reference for future use. If
you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.

Explanation of symbols

Throughout this User Manual the following symbols are used:

Important information or

C

A

useful hints about usage.

Warning for hazardous
situations with regard to life
and property.

Warning for electric shock.

B

Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.

Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the
local authorities.

This product was manufactured using the latest technology in environmentally friendly conditions.

CONTENTS

SoftTouch Accessory ...............................26

1 INSTRUCTIONS

FOR SAFETY AND
ENVIRONMENT 4

General safety ...........................................4

Intended use ..............................................4

Children’s safety ........................................5

Disposing of packaging material................5

Transportation of the product ....................5

Compliance with WEEE Directive and

Disposing of the Waste Product ................6

Compliance with RoHS Directive...............6

Package information ..................................6

2 DISHWASHER 7

Overview....................................................7

Fan drying system .....................................8

Technical specications .............................8

3 INSTALLATION 9

Appropriate installation location.................9

Connecting water supply ...........................9

Connection to the drain ...........................10

Adjusting the feet .....................................10

Aquasafe+ ..............................................11

Electrical connection................................11

Initial use .................................................11

4 PREPARATION 12

Tips for energy saving .............................12

Water softening system ...........................12

Adjusting the water softening system ......12

Adding salt ...............................................14

Detergent .................................................15

Adding detergent .....................................15

Combined tablet detergents ....................16

Rinse aid..................................................17

Silverware basket piece...........................20

Silverware basket ....................................20

Cutlery basket .........................................21

Cutlery basket .........................................21

Collapsible lower basket wires (6 pieces) 22
Collapsible lower basket wires (4 pieces) 23
Collapsible lower basket wires (2 pieces) 23

Collapsible lower basket tines .................24

Collapsible lower basket tines .................25

Lower basket bottle wire ..........................25

Lower Basket Glass Holder .....................26

Tray Wash Supports ................................26

Lower basket multipurpose / height

adjustable service rack ............................27

Upper basket height adjustable rack .......28

Upper basket drawer ...............................28

Upper basket glass support piece ...........28

Upper basket glass support piece ...........29

Collapsable upper basket wires...............29

Collapsible upper basket tines.................30

Collapsible upper basket tines.................30

Adjusting the height of the upper basket .31
Adjusting the height of loaded upper

basket ......................................................32

Height setting with empty basket .............33

Upper cutlery basket................................34

5 OPERATING THE

PRODUCT 35

Keys.........................................................36

Function keys ..........................................36

Preparing the machine ............................36

Programme selection...............................36

Auxiliary functions....................................38

Scheduling the washing time ...................39

Starting the programme ...........................40

Cancelling the programme ......................40

Salt indicator (
Rinse Aid indicator (

End of programme ...................................41

Water cut-off warning...............................41

Overowing warning ................................41

InnerClean ...............................................41

) ...................................40

) ...........................41

6 MAINTENANCE AND

CLEANING 42

Cleaning the outer surface of the product 42

Cleaning the interior of the machine ........42

Cleaning the lters ...................................42

Cleaning the hose lter ............................43

Cleaning the impellers .............................44

Lower impeller .........................................44

Upper impeller ........................................44

Ceiling Impeller ........................................45

7 TROUBLESHOOTING 46

INSTRUCTIONS FOR SAFETY AND ENVIRONMENT

1

This section contains safety
instructions that will help to
get protected from risk of
personal injury or property
damage. Failure to follow
these instructions shall void all
warranties.

General safety

• Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts
to overheat. This will
cause problems with your
product.

• Do not operate the product
if the power cable / plug
is damaged! Call the
Authorised Service Agent.

• Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation
made by a qualified
electrician. Our company
shall not be liable for any
damages that will arise
when the product is used
without grounding in
accordance with the local
regulations.

• The water supply and
draining hoses must be
securely fastened and
remain undamaged.

• Unplug the product when
not in use.

• Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!

• Never touch the plug with
wet hands! Never unplug
by pulling on the cable,
always pull out by grabbing
the plug.

• The product must
be unplugged during
installation, maintenance,
cleaning and repairing
procedures.

• Always have the
installation and repairing
procedures carried out by
the Authorised Service
Agent. Manufacturer
shall not be held liable for
damages that may arise
from procedures carried
out by unauthorised
persons.

• Never use chemical
solvents in the product.
They bring forth the risk of
explosion.

• When you pull the upper
and lower baskets out
completely, the door of
the product will bear all
the weight of the baskets.
Do not put other loads on
the door; otherwise, the
product may tilt.

• Never leave the door of
the product open apart
from loading and unloading
procedures.

• Do not to open the door
of the product when it is
running unless necessary.
Be careful for the rush of
hot vapour when you need
to open the door.

Intended use

• This product has been
designed for domestic use.

Page 4 FIDWB14 60cm Fully Inte grated Dishwasher User Manual

instructions for safety and environment

• It must be used to do the
domestic type dishes only.

• This appliance is intended
to be used in household
and similar applications
such as:

- Staff kitchen areas in shops,
offices and other working
environments;

- Farm houses;

- By clients in hotels, motels
and other residential type
environments;

- Bed and breakfast type
environments

• Only dishwasher safe
detergents, rinse aids and
additives must be used.

• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.

• The service life of your
product is 10 years. During
this period, original spare
parts will be available
to operate the product
properly.

• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical,sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
without supervision.

Children’s safety

• Electrical products are
dangerous for the children.
Keep children away from
the product when it is in
use. Do not let them to
tamper with the product.

• Do not forget to close the
door of the product when
leaving the room where it
is located.

• Store all detergents and
additives in a safe place
away from the reach of the
children.

Disposing of packaging
material

Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured
from recyclable materials.
Dispose of them properly
and sort in accordance with
recycled waste instructions.
Do not dispose of them with
normal domestic waste.

Transportation of the
product

If you need to move

A

the product, do it in
upright position and
hold from the rear
side. Slanting the
product onto its front
side may cause the
electronic parts in it
get wet and damaged.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 5

instructions for safety and environment

1. Unplug the product before
transporting it.

2. Remove water drainage
and water supply
connections.

3. Drain the remaining water
in the product completely.

Compliance with WEEE
Directive and Disposing
of the Waste Product

This product complies
with EU WEEE Directive
(2012/19/EU). This
product bears a

classification symbol for
waste electrical and electronic
equipment (WEEE).This
product has been
manufactured with high quality
parts and materials which can
be reused and are suitable for
recycling. Do not dispose of
the waste product with normal
domestic and other wastes at
the end of its service life. Take
it to the collection center for
the recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.

Package information

Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes.
Take them to the packaging
material collection points
designated by the local
authorities.

Compliance with RoHS
Directive

The product you have
purchased complies with EU
RoHS Directive (2011/65/EU).
It does not contain harmful and
prohibited materials specified
in the Directive.

Page 6 FIDWB14 60cm Fully Inte grated Dishwasher User Manual

DISHWASHER

2

Overview

16

1. Upper basket

2. Upper impeller

3. Lower impeller

4. Filters

5. Lower basket

6. Rating Label

7. Control panel

8. Door

9. Detergent dispenser

10. Cutlery basket

11. Salt reservoir lid

12. Upper basket rail

13. Upper cutlery basket

14. Top Cover (depends on model)

15. Ceiling impeller

16. Fan drying system (depends on model)

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 7

Dishwasher

Technical specications

Compliance to standards and test data / EC declaration of conformity

This product complies with the following EU directives;
Development, production and sales stages of this product comply with the
safety rules included in all pertaining European Community regulations.

2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242

Power input 220-240 V, 50 Hz (see rating label)

Total power consumption 1800-2100 W (see rating label)

Heater power consumption 1800 W (see rating label)

Total current (depends on the model) 10 A (see rating label)

Drain pump power consumption 30 W (see rating label)

Water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0

Mpa)

Technical specifications may be changed without prior notice to improve

C
C
C

the quality of the product.

Figures in this manual are schematic and may not match the product
exactly.

Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of
the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.

Fan drying system

(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan
operation.

Note for test institutions:

Data required for performance tests shall be provided upon request. Requests can
be e-mailed to the following address:

[e-mail]

Do not forget to provide the code, stock and serial numbers of the product to be
tested in your request e-mail along with your contact information. Code, stock and
serial numbers of the product may be found on the type label attached to the side
wall of the door.

Page 8 FIDWB14 60cm Fully Inte grated Dishwasher User Manual

3

INSTALLATION

Refer to the nearest Authorised
Service Agent for installation of your
product. To make the product ready
for use, make sure that the electricity,
tap water supply and water drainage
systems are appropriate before calling
the Authorised Service Agent. If they
are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.

Preparation of the location
and electrical, tap water and

C

B

A

C

When placing the product, pay attention
not to damage the floor, walls, piping,
etc. Do not hold the product from its
door or panel to move it.

waste water installations
at the place of installation
is under customer's
responsibility.

Installation and electrical
connections must be carried
out by the Authorised Service
Agent. Manufacturer shall
not be held responsible
for damages arising from
processes carried out by
unauthorised persons.

Prior to installation, visually
check if the product has any
defects on it. If so, do not
have it installed. Damaged
products cause risks for your
safety.

Make sure that the water
inlet and discharge hoses
are not folded, pinched or
crushed while pushing the
product into its place after
installation or cleaning
procedures.

Appropriate installation location

• Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be
installed on a flat surface in order for
the door to be closed comfortably and
securely.

• Do not install the product at places
where temperature may fall below
0ºC.

• Place the product at least 1 cm away
from the edges of other furniture.

• Place the product on a rigid floor.
Do not place it on a long pile rug or
similar surfaces.

Do not place the product on

B

• Make sure that you select a location

• Install the product in a place close to

the power cable.

that will allow you to load and unload
the dishes in a fast and comfortable
manner.

the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.

Connecting water supply

We recommend attaching
a filter on the house/

C

apartment supply water inlet
to protect the machine from
damages that may arise from
impurities (sand, dirt, rust,
etc.) coming from the urban
water supply system or from
your own water system as
well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 9

Installation

min

300

min

120

max 1000

min 500

Permitted water temperature: up to
25°C

The dishwasher may not be connected
to open warm water devices or flow­through water heaters.

• Do not use old or used water inlet
hose on the new product. Use the
new water inlet hose supplied with
the product.

• Connect the water inlet hose
directly to the water tap. Pressure
coming from the tap should be
minimum 0.3 and maximum 10
bars. If the water pressure exceeds
10 bars, a pressure relief valve
should be installed in between.

• Open the taps completely after
making the connections to check
for water leaks.

Use a screw-on hose
connector to connect the

C

water inlet hose to a water
tap with a ¾ inch external
thread. If required, use a
filter insert to filter deposits
from the pipes.

than 4 meters causes dirty washing.
Attach the water discharge hose
to the drainpipe without bending it.
Tightly fix the water discharge hose to
the drainpipe in order to prevent any
dislocation of the water discharge hose
during operation of the product.

Drainpipe must be connected
to the sewage system and it

C

should not be connected to
any surface water.

For your safety, close the
water inlet tap completely

A

after the washing programme
is over.

Connection to the drain

Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm
from the floor. A discharge hose longer

Page 10 FIDWB14 60cm Fully Integrate d Dishwasher User Manual

Adjusting the feet

If the door of the product cannot be
closed properly or if the product swings
when you push it slightly, then you need
to adjust the feet of the product. Adjust
the feet of the product as illustrated in
the installation manual supplied with the
product.

Diswashers door must be
aligned properly otherwise

A

hot steam can escape!
Danger of serious burns,
other injury or may damage
furniture.

Installation

sections “Important safety instructions” and

the initial use, fill the salt reservoir with
1 litre of water prior to filling it with salt.

harm on the product.

Aquasafe+

(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system. If the
Aquasafe+ system is damaged, unplug
the product and call the Authorised
Service Agent.

As the hose set contains
electrical connections and

A

assemblies, never shorten
or lengthen the hose with
extension hoses.

• The voltage and allowed fuse or
breaker protection are specified in
the “Technical specifications” section.
If the current value of the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician
install a 16 Amp fuse.

• The specified voltage must be equal
to your mains voltage.

• Do not make connections via
extension cables or multi-plugs.

Damaged power cables
must be replaced by the

B
B

B

Authorised Service Agent.

If your dishwasher is
equipped with internal
illumination, lamp should
only be replaced by the
Authorised Service Agent
in case of failures that may
occur on the lamp.

If the product has a failure,
it should not be operated
unless it is repaired by the
Authorised Service Agent!
There is the risk of electric
shock!

Electrical connection

Connect the product to a grounded
outlet protected by a fuse complying
with the values in the “Technical
specifications” table. Our company shall
not be liable for any damages that will
arise when the product is used without
grounding in accordance with the local
regulations.

• Connection must comply with
national regulations.

• Power cable plug must be within
easy reach after installation.

Unplug the product after the

B

washing programme is over.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 11

Initial use

Before starting to use the product, make
sure that all preparations are made
in accordance with the instructions in

“Installation”.

• To prepare the product to do the
dishes, perform first operation in the
shortest programme with detergent
while the machine is empty. During

A

There might be a small
amount of water left in the
product after factory quality
control tests. This has no

PREPARATION

4

Tips for energy saving

Following information will help you use
the product in an ecological and energy­efficient manner.
Wipe away any coarse food remnants
on the dishes before putting them in
the product. Operate the product after
filling it completely. When selecting
a programme, consider the table
of “Programme data and average
consumption values”.
Do not put more detergent than
suggested on the detergent package.

Water softening system

Your dishwasher requires
soft water. If the hardness

C

of the water is above 6°dH,
the water must be softened
and descaled. Otherwise,
ions that create the hardness
will accumulate on the
surfaces of the dishes and
may adversely affect the
washing, shining and drying
performances of the product.

Adjusting the water softening
system

Cleaning, rinsing and drying
performance of your dishwasher will
increase when water softening system
is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the
product according to the steps given
below to determine hardness level of
your supply water.

The product is equipped with a water
softening system which reduces the
hardness of incoming water. This
system softens the supply water that
enters into the product to a level that
will allow washing the dishes with the
required quality.

Pag e 12 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Preparation

Remove the test
strip from the
packet.

Turn on the tap and
let the water run for
about a minute.

Hold the test strip in
the water for about
a second.

Remove the test
strip from the water
and shake it.

Wait for 1 minute. The test strip shows

you the hardness
level.

After determining hardness level of the supply water:

1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.

2. Press P+/P key to activate the (r..) position.

3. Using Time Delay key, adjust water hardness level according to the hardness of
the supply water. See “Water hardness level adjustment table” for correct setting.

4. Press On / Off key to save the setting.

Water hardness level adjustment table

Hardness
Level

0th Level

1st Level

2nd Level

3rd Level

4th Level

5th Level

English Water
Hardness °dE

10-15 8-12 14-22

16-19 13-15 23-27

20-24 16-19 28-34

25-62 20-50 35-90

German Water
Hardness °dH

0-5 0-4 0-8

6-9 5-7 9-13

French Water
Hardness °dF

Water Hardness Level Indicator

Press the Time Delay key to switch the water hardness level
to position 1. (r1)

Press the Time Delay key to switch the water hardness level
to position 2. (r2)

Press the Time Delay key to switch the water hardness level
to position 3. (r3)

Press the Time Delay key to switch the water hardness level
to position 4. (r4)

Press the Time Delay key to switch the water hardness level
to position 5. (r5)

In order to protect your glassware against glass corrosion in an optimal way, you
have to perform the same hardness settings, which you have made in the control
panel, with the regeneration setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the
regeneration adjustment switch to 3rd level.

Regeneration Adjustment Switch

0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level

1 1 2 3 4 5

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 13

Preparation

If the hardness level of the supply water
is above 90 °dF or if you are using well
water, then it is recommended to use
water purification devices and special
filters.
If the hardness level of the supply water
is below 13°dF, there is no need to
use salt in your dishwasher. If this is
the case, “No Salt Warning Indicator”
(if any) illuminates continuously on the
panel of your machine.
If the water hardness level adjustment
is set to level 1, the “No salt warning
indicator” will illuminate continuously
although it is not necessary to use salt.
If you use salt under this condition,
salt will not be consumed and the Salt
indicator will not illuminate.

If you move your house,
it is necessary to readjust

C

water hardness level of your
machine by considering the
information given above
according to the hardness
level of the supply water
in your new location. Your
machine will display the
most recently adjusted water
hardness level.

We recommend using
granular or powder softening

C

C

1. First take the lower basket out to

2. Turn the salt reservoir lid counter

salts. Do not use salts that
are insoluble in water such
as table salt or common
salt. Performance of water
softening system may get
worse in time.

Salt reservoir will fill with
water when you start the
product. Therefore, add the
softening salt before starting
the machine.

add softening salt.

clockwise to open it (A, B).

Adding salt

Water softening system needs to be
regenerated in order that the product
operates with the same performance
continuously. Dishwasher salt is used
for this purpose.

Use only special softening
salts produced particularly

C

for the dishwashers in your
machine.

C

Pag e 14 FIDWB14 60cm Fully Integrate d Dishwasher User Manual

Salt reservoir will fill with
water when you start the
product. Therefore, add the
softening salt before starting
the machine.

Preparation

Before initial use, fill the
water softening system with

C

3. Fill the salt reservoir with salt by

1 litre of water (C).

using salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.

Since different salt brands
in the market have different

C

Detergent

You can use powder, liquid/gel and
tablet detergents in the machine.

C

particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
Loose salt grains can cause
rust marks in your machine if
not rinsed away. Only fill salt
just before a programme is
run.

Only use the detergents
produced particularly for use
with dishwashers. Never
use washing up liquids.
We recommend you not to
use detergents that contain
chlorine and phosphate
as they are harmful for the
environment.

You can put about 2 kg of
dishwasher salt into the salt

C

4. Replace the lid and tighten it

5. If you will not start a washing

reservoir.

securely when the reservoir is full.

programme immediately after
adding the salt, run the machine
empty in the shortest programme
to dissolve and wash away the
scattered salt in the machine.

Adding detergent

Refer to the “Programme
Table” to determine the

C
C

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 15

correct amount of detergent
for the selected programme.

In order to have good
washing and drying results,
always follow the instructions
on the detergent packaging.
If you have further questions,
we recommend to contact
with the producer of the
detergent.

Preparation

A

Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.

1. Push the latch to right to open the

2. Put suggested amount of powder,

C

Do not put solvents into the
detergent dispenser. There is
risk of explosion!

detergent dispenser lid (A).

liquid/gel or tablet detergent in the
dispenser.

Inside the detergent
dispenser, there are level
markings that help you
use appropriate amount of
detergent. When brimful,
detergent dispenser will
contain 40 cm³ of detergent.
Fill detergent up to 15 cm³
or 25 cm³ level marks in
the detergent dispenser
according to fullness of
the machine and/or soiling
degree of the dishes (1).

If dishes have been waiting
for a long time and have

C

3. Close the detergent dispenser lid by

C

C

A

dried residues, fill the 5 cm³
compartment too (2).

pressing on it lightly. A “click” will be
heard when the lid is closed.

In programmes with prewash
and high temperature,
in which you use tablet
detergents, make sure that
the detergent dispenser lid is
closed firmly.

Use powder detergent in
short programmes without
prewash since the solubility
of the tablet detergent
changes depending on the
temperature and time.

Excessive usage of powder
detergents will cause the
detergent not dissolve
completely and will also
cause scratches on the
glassware.

Combined tablet detergents

Combined tablet detergents exhibit
water softening and / or rinse aid effect
in addition to detergent effect. Some
types of these detergents also contain
special-purpose washing chemicals
such as glass and stainless steel
protectors.

Page 16 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Preparation

Combined tablet detergents are
available as 3in1, 5in1, Allin1 etc. They
function only up to a specific degree
of water hardness. Above this limit
regeneration salt and rinse aid must be
added. Refer to the instructions on the
packaging of the combined detergent
whether it is suitable for the hardness
level of the water supply.

While using combined tablet
detergents contact with the

C

C

When you switch to powder, liquid/gel
or tablet detergent from a combined
tablet detergent:

1. Make sure that salt and rinse aid

2. Set the water hardness to the

3. After the empty washing cycle,

4. Make the appropriate rinse aid

C

detergent producers if the
dishes are wet and/or if
you notice limescale spots
particularly on glasses after
the washing programme is
over.

The best washing
performance in dishwashers
is obtained by using
detergent, rinse aid and water
softening salt individually.

reservoirs are full.

highest level and perform an empty
run.

review the user manual and
readjust the water hardness level so
as to suit the water supply.

settings.

Depending on the model,
salt indicator and/or rinse aid
indicator must be enabled
again if they were disabled
before.

Rinse aid

The rinse aid used in
dishwashers is a special

C

1. Open the lid of the rinse aid

2. Fill the reservoir until “MAX” level.

3. Turn the rinse aid amount adjuster

combination used to increase
drying efficiency and prevent
water or limescale stains on
the washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.

reservoir by pressing its latch (B).

manually to a position between
1 and 6 (4). If there are stains on
tableware items after washing, level
must be increased and if there is
a blue trace after wiping them by
hand, it must be decreased. This is

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 17

Preparation

set to position 4 as factory default.

4. Close the lid of the reservoir by
pressing on it lightly.

Wipe clean any spilled
rinse aid outside the

C

Items not suitable for washing in the
dishwasher

• Never wash dishes soiled by

• Do not wash iron alloy items in the

• Do not wash cutlery with wooden

C

reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.

cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in
your dishwasher.

dishwasher. It can get corroded or
leave stains on other items.

or bone stems, glued pieces,
or pieces that are not resistant
to heat, as well as copper and
tin-plated containers in the
dishwasher.

Decorative prints of
chinaware as well as
aluminum and silver items
may get discoloured or
tarnished after washing in
the dishwasher just as it
happens in handwashing as
well. Some delicate glass
types and crystals may
become dull in time. We
strongly recommend you
to check if the tableware
you are going to purchase
is suitable for washing
especially in the dishwasher.

Placing the dishes into the
dishwasher

You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the
dishes in an orderly way.

• Wipe away any coarse food
remnants (bones, seeds, etc.) on
the dishes before placing them in
the dishwasher.

• Place thin, narrow pieces in the
middle sections of baskets if
possible.

• There are two separate baskets in
which you can place your dishes in
the dishwasher. Place the heavily
soiled and bigger items in the lower
basket and smaller, delicate and
light items in the upper basket.

• Place the hollowed dishes such as
bowls, glasses and pans upside
down in the dishwasher. Thus,
accumulation of water in deep
hollows is prevented.

To prevent possible injuries,
always place the sharp and

A

Unload dishes in the lower basket first
and then the dishes in the upper basket.

pointed dishes such as
service fork, bread knife,
etc. upside down so as their
pointed ends will face down
or they will lie horizontally in
the dish basket.

Page 18 FIDWB14 60cm Fully Integrated Dishwa sher User Manual

Preparation

Suggestions for loading the dishwasher

Lower basket

Improper Loading Of Dishware

Upper basket

Improper Loading Of Dishware

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 19

Preparation

Silverware basket piece

(depends on model)
You can place your forks, spoons and
etc. to upper basket with the additional
piece in the figure..

Silverware basket

(depends on model)
Silverware basket is designed to wash
your dishes such as fork, spoon and
etc. in a cleaner manner.

Page 20 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Preparation

Cutlery basket

(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in
an efficient manner.
Since the cutlery basket can be moved
(A, B), you can create more space while
placing your dishes in the lower basket
and free up space for your dishes of
different sizes.

Cutlery basket

(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in
an efficient manner.
Since the cutlery basket can be moved
(A, B), you can create more space while
placing your dishes in the lower basket
and free up space for your dishes of
different sizes..

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 21

Preparation

Collapsible lower basket wires
(6 pieces)

(depends on model)
The foldable wires (A) located at
the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
You can create larger spaces by folding
each wire individually or all them at
once.
To bring the collapsible wires into
horizontal position, grab the wire from
mid position and push them in the
directions of arrows (B) To bring the
wires back to vertical position, just lift
them up. Collapsible wires will click into
the latch again.

Bringing the wires to
the horizontal position

C

byholding them from the
tips may cause them to
bend. Therefore, it will be
appropriate to bring the wires
in the middle to horizontal or
vertical position by holding
them from their stems and
pishing in the direction of
arrow.

4

3

5

6

Page 22 FIDWB14 60cm Fully Integrated Dishwa sher User Manual

Preparation

Collapsible lower basket wires
(4 pieces)

(depends on model)
The four piece foldable wires located
at the lower basket of the machine
are designed for an easier placement
of large pieces such as pans, bowls,
etc. (1, 2, 3, 4). You can create larger
spaces by folding each wire individually
or all of them at once. Lay the foldable
wires down by pressing on the latch (A).

Collapsible lower basket wires
(2 pieces)

(depends on model)
The two piece foldable wires located
at the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
(1, 2).
You can create larger spaces by folding
each wire individually or all of them at
once. Lay the foldable wires down by
pressing on the latch (A).

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 23

Preparation

Collapsible lower basket tines

(depends on model)
There are foldable tines (A) located at
the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
You can create larger spaces by folding
each tines individually or all of them at
once.

To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows (B). To bring the
tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again (C).

C

Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring
the tines in the middle to
horizontal or vertical position
by holding them from their
stems and pushing in the
direction of arrow.

Page 24 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Preparation

Collapsible lower basket tines

(depends on model)
There are foldable tines (A) located at
the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
You can create larger spaces by folding
each tines individually or all of them at
once.

To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows (B). To bring the
tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again (C).

Bringing the tines to the
horizontal position by holding

C

them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring
the tines in the middle to
horizontal or vertical position
by holding them from their
stems and pushing in the
direction of arrow.

Lower basket bottle wire

(depends on model)
The bottle wire is designed for easier
washing of long pieces with wide
mouths. You may take out the bottle
wire from the basket when not in use by
pulling it out from both sides (H).

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 25

Preparation

SoftTouch Accessory

(depends on model)
The SoftTouch Accessory found in the
lower basket of your machine enables a
safe washing for your fragile glasses.

Lower Basket Glass Holder

(depends on model)
Lower Basket Glass Holder found in the
lower basket of your machine enables a
safe washing for your oversized and tall
glasses.

Tray Wash Supports

(depends on model)
Use the supports to wash trays in the
bottom basket.
See the Auxiliary functions section for
appropriate programme and function
selection.

Page 26 FIDWB14 60cm Fully Integrated Dishwa sher User Manual

Preparation

Lower basket multipurpose /
height adjustable service rack

(depends on model)
This accessory located at the lower
basket of your machine allows you
to easily wash pieces such as extra
glasses, long ladles and bread knives.

Make sure that the impeller

A

To close the racks:

1. Fold the rack (A).

2. Slide the rack up (B).

3. Put the rack in vertical position (C).

4. Slide the rack down and lock it by

C

To adjust the height of the racks:

1. Fold the rack (E).

2. Slide the rack up (F).

3. Open the rack at the desired level

does not touch the dishes
you placed on the racks.

the tabs (D).

You may open the racks in
the same process in reverse
order.

(G).

C

You may use the racks as
required by moving them to
lower or upper position, or
close them to create a wider
space in your lower basket.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 27

Preparation

Upper basket height
adjustable rack

(depends on model)
Use the lower and upper parts of the
height adjustable racks in the upper
basket of the machine by sliding them
down or up according to the heights of
the glasses, cups or etc. (A, B, C).

Upper basket drawer

(depends on the model)
You can easily place additional desert
spoons, small forks and knives into the
basket drawer installed to the upper
basket of your machine.

Upper basket glass support
piece

(depends on the model)
When placing long stemmed glasses or
wine glasses, do not lean them against
other pieces but to the edge of the
basket or to the rack (1). Do not lean
long glasses against each other. They
can move and get damaged during
washing.
If you wish to place large-volume pieces
on the upper basket, release the tab of
the glass support piece from the upper
basket wire it is hooked to. Thus, you
can obtain a wider space.

Page 28 FIDWB14 60cm Fully Integrated Dishwa sher User Manual

Preparation

Upper basket glass support
piece

(depends on the model)
When placing long stemmed glasses or
wine glasses, do not lean them against
other pieces but to the edge of the
basket or to the rack (1). Do not lean
long glasses against each other. They
can move and get damaged during
washing.
If you wish to place large-volume pieces
on the upper basket, release the tab of
the glass support piece from the upper
basket wire it is hooked to. Thus, you
can obtain a wider space.

Collapsable upper basket
wires

(depends on the model)
To bring the collapsable wires on the
upper basket of the machine into
horizontal position, press on the latch
(1). Place your larger dishes into the
area created (2). To bring the wires
back to vertical position, just lift them
up.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 29

Preparation

Collapsible upper basket tines

(depends on model)
There are foldable tines on the upper
basket of the machine that you can lay
down when you need larger space for
big dishes. On your upper basket there
are two types of laying tines namely,
fully laid system (A) and gradually laid
system (B). To bring the foldable tines
into horizontal position, push the tines
in the direction of the arrow by holding
from the middle. Place your larger
dishes into the area created. To bring
the tines back to vertical position, just lift
them up. Foldable tines will then snap in
the latch again.

Collapsible upper basket tines

(depends on model)
Upper basket of the machine is
equipped with tines with gradual folding
system (A) that you can lay down
when you need a larger space for large
dishes.
To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows. Place your larger
dishes into the area created. To bring
the tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again.

Holding the tines from ends
to put them in lying position

C

Page 30 FIDWB14 60cm Fully Integrated Dishwasher User Manu al

may cause the tines to
bend. For this reason, it will
be appropriate to hold the
tines in the middle from their
bottoms and to push in the
direction of the arrow to lay
down or bring them to vertical
position.

C

Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring
the tines in the middle to
horizontal or vertical position
by holding them from their
stems and pushing in the
direction of arrow.

Preparation

Adjusting the height of the
upper basket

(depends on model)
Basket adjustment mechanism on the
loaded upper basket of the machine
is designed to allow you create taller
areas in the upper or lower section
of the machine based on your
requirements by adjusting the height
of the loaded basket in up or down
directions.
To raise the basket:
Grab one of the upper basket wires
(right or left) and lift it up (A).
Repeat the same process to raise the
other side of the basket.

Repeat the same process to lower the
other side of the basket.
Make sure that both sides of the loaded
basket height adjustment mechanism
are at the same level (down or up).

Make sure that both sides of the loaded
basket height adjustment mechanism
are at the same level (down or up).
To lower the basket:
Press the latch on the loaded basket
adjustment mechanism (right and left)
to lower the basket (B).

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 31

Preparation

Adjusting the height of loaded
upper basket

(depends on model)
Basket adjustment mechanism on
the upper basket of the machine is
designed to allow you create wider
areas in the upper or lover section of the
machine based on your requirements
by adjusting the height of the loaded
basket in up or down directions without
removing it from the machine.
To raise the basket:

1. Grab one of the upper basket wires

2. Repeat the same process to raise

3. Make sure that both sides of

To lower the basket:

1. Press the latch on the basket

2. Repeat the same process to lower

3. Make sure that both sides of

(right or left) and lift it up (A).

the other side of the basket.

the basket height adjustment
mechanism are at the same level
(down or up).

adjustment mechanism (right or left)
to lower the basket (B).

the other side of the basket.

the basket height adjustment
mechanism are at the same level
(down or up).

Page 32 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Preparation

Height setting with empty
basket

(depends on model)
In this model, the height setting of the
upper basket may be changed using
the wheels which are mounted at two
different heights.
Release the latches on both the right
and left tracks of the upper basket by
pushing them outwards
Pull out the basket out completely.
Place the basket back into the tracks at
the desired height
Push the latches back into the correct
position.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 33

Preparation

Upper cutlery basket

(depends on model)
The upper cutlery basket is designed for
small dishes, or long items that cannot
fit into the lower cutlery basket.

Thanks to the easy take-out-from-the­machine feature, it allows taking out
the dishes from the machine together
with the basket after they are washed
(A). Since it can fit into all standard
size drawers, it does not require the
dishes to be removed from the basket
and placed into the kitchen drawers or
shelves.









After taking out the basket by lifting it
up, remove the carrier part from the rails
by pulling it towards yourself (C).



Replace the rail lids and push them
back to seat them into their places. Turn
the rails inside the machine sideways to
seat them properly in their places (D).

If you don’t want to use the upper
cutlery basket, pull it back to yourself to
remove it from the machine, rotate the
rail lids towards outside and pull them
towards yourself to take them out (B).

Page 34 FIDWB14 60cm Fully Integrated Dishwa sher User Manual

In order to replace the upper cutlery
basket into its place again, repeat the
same process in reverse order.







5

5

OPERATING THE PRODUCT

5

1

1. On/Off key

2. Programme Selection / Programme Cancel (3 seconds) key

3. Function keys
F1
F2
F3
F4

4. Programme indicator

5. Salt indicator
Not in use

6.

7. Start / Cancel indicator

8. Time Delay / Programme Time indicator

9. Time Delay key

10. Time Delay indicator

11. End of Programme indicator

12.

Not in use

13. Rinse Aid indicator

2 4 5 6 7 8 3 9

3

111213

Half Load function
Extra Drying Function
Fast+ Function
TurboWash Function

10

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 35

Operating the product

Keys

On/Off key

When you press On / Off key, indicator
lights illuminate on the display for ON
position. The lights turn off in OFF
position.

Programme Selection / Programme
Cancel key

Press this key until the desired
programme appears in the programme
indicator.

To cancel the running programme open
the door of the product. Press and hold
the Programme Selection / Programme
Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed,
close the door of the product and wait
for the draining process complete.
Draining is completed in 2 minutes and
the machine gives an audible warning
when it is completed.

Function keys

If you press any of the Function keys
during programme selection or time
delay selection, an affirmative key
signal will be heard provided that the
relevant function is supported by the
selected programme. Function will be
deemed selected when the indicator of
the selected function is lit.
To cancel the selected function, keep
the function key pressed until the
function indicator disappears.

Programme selection

1. Press the On/Off button to turn on
your machine.

2. Check the Salt and Rinse Aid
indicators and add salt and/or rinse
aid if needed.

3. Refer to the table of “Programme
data and average consumption
values” to determine a washing
programme suitable for your dishes.

4. Selected programme will start when
you close the door of your machine.

Preparing the machine

1. Open the door of the dishwasher.

2. Place the dishes in accordance with
the instructions in the user manual.

3. Make sure that the upper and lower
impellers rotate freely.

4. Put adequate amount of detergent
into the detergent dispenser.

Page 36 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Operating the product

12345678

g

+ - + - ++++

- +++++++

- -++++++

Degree of Soiling

Energy (kWh)

Prewash

Duration (min)

Water (I)

The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under prac

programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dis

using the test programme.

Programme number

Programme name

Cleaning temperature

#

Sensitivity: Public

washing water as

are washed

of dishes.

time autom atically.

well as the washing

Suitable for all types

are washed

lower basket.

sensitively in the

powerfully in the

the pots and pans

upper basket while

amount of the

Determines the

temperature and

dishes and sets the

soiling degree of the

The best suitable

programme for the

daily dishes. Glass

and crystal utensils

mixed nature of the

tical conditions. * Reference

penser and a full rinse aid reservoir, and

babies. Also

soiled dishes.

as articles for

Suitable for the

Suitable for heavily

Daily washing

suitable for heavily

extra hygiene such

dishes which require

and pans.

soiled dishes, pots

in the fastest way.

the medium soiled

waiting are cleaned

dishes that are kept

programme at which

.

Programme Table

for the medium

Most economical

soiled daily dishes

that are kept waitin

washing programme

pre-cleaned.

Suitable for lightly

soiled daily dishes

that are scraped or

- 35 ºC 45 ºC 60 ºC 70 ºC 70 ºC 70 ºC 40-65 ºC

Pre-wash Mini Eco * Quick Intensive Hygiene Mix+ Auto

Suitable for

removing the

remnants on the

soiled dishes that

for preventing the

will be kept waiting

bad odour buildup.

few days, and thus,

in the machine for a

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 37

- Low Medium Medium High High High Medium to high

15 30 142 58 153 127 183 110-210

Wash

Dry

- 0,80 0,89 1,30 1,43 1,68 1,36 0,90-1,45

4 10,2 11,2 10,2 16,2 17,6 18,6 10,2-14,4

Operating the product

Auxiliary functions

Washing programmes of your
dishwasher are designed to obtain the
best cleaning effect, considering the
type of the soiling, soiling degree and
properties of the dishes to be washed.
Auxiliary functions allow you save from
time, water and power.

Auxiliary functions may cause
changes in the programme

C
C

Half Load function

It is used to operate the machine
without loading it completely.

1. Load your dishes in the machine as

2. Turn the machine on with On/Off

3. Select the desired programme and

While the function is enabled, the Half
Load indicator will become on in the
function selection indicator and on the
display.

4. Close the door of the machine to

C

duration.

Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is
not compatible with the
programme will not be active.

you like.

key.

press the Half Load key.

start the programme.

With the Half Load function
you can save both water and
power while using the lower
and upper baskets of the
machine.

Fast+ Function

It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.

Extra Drying Function

It provides superior drying performance.

Auto Tablet Feature

Auto Tablet is a feature which detects
the use of combined tablet detergents
automatically.

Drying performance of
these type of detergents

C

Owing to this feature, there is no need
to press any button in case of a tablet
detergent use.

Feature can be activated if automatic
detection is desired.

To activate / to deactivate:

1. After turning on the machine,

2. Press P key to activate the a:

3. Turn off the machine with On/Off

is improved by adjusting
temperature and duration
accordingly.

press Time Delay and P keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.

option. Automatic detergent
detection feature is disabled at “a:0”
option and enabled at “a:1” option.
Set the desired option by pressing
the Time Delay key.

key to save the changes.

TurboWash Function

This function operates the lower
impeller with a higher pressure and
higher speed to enable a better washing
for dishes such as pans and trays with
stubborn, dried soiling.

Page 38 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Operating the product

Interior Lighting

(Depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.

Changing the interior lighting
setting

1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Continue to press
until the countdown 3, 2, 1 is
completed on the display.

2. Press P+ key to activate the L:
option. The interior lighting is turned
off at "L:0" option and turned on at
"L:1" option. Set the desired option
with the Time Delay key.

3. Turn off the machine with On/Off
key to save the changes.

Changing Warning Sound Volume

1. After switching your machine on,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.

2. Press P / P+ key to activate the S:
position on the display.

3. Each pressing on the Time Delay
key will change the warning sound
volume as "S:0" off, "S:1" medium
and "S:2" high.

4. Turn off the machine with the On/Off
key to save the changes.

3. Each pressing on the Selection
key will change the warning sound
volume as "S:0" off, "S:1" medium
and "S:2" high.

Your machine is set to

C

“S:2” as factory default.

Floor illumination
Warning to show that machine is in
washing phase

(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light
turns off after the washing process is
complete.

Floor illumination is activated
automatically when the

C

C

washing programme starts
and remains lit until the end
of the programme.

Floor illumination cannot be
cancelled by the user.

Scheduling the washing time

Time Delay

If an economical electricity tariff is
applied in your region, you can use
the Time Delay function to wash your
dishes during appropriate hours.
You can delay the start of the selected
programme until 24 hours.

1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions.

2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will
start flashing.

3. Set the desired time by pressing the
Time Delay key. Time will increase
with increments of 30 minutes up
to 6 hours and after that in 1 hour
increments up to 24 hours every
time you press the key.

4. Close the door of your machine
after setting the Delayed Start.
Once the delay time is over, the
selected programme will start
automatically.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 39

Operating the product

Changing the settings while Time
Delay function is active

While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay time.

Programme and auxiliary
functions cannot be set/

C

To cancel the Time Delay function

Open the door of the product Press
and hold the Programme Selection /
Programme Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.

C
C

Starting the programme

Close the door of your machine to start
it after selecting the programme and
auxiliary functions.

C

changed after the programme
has started.

You can select and start a
new programme following the
cancellation of Time Delay
function.

Time Delay function cannot
be set after the programme
starts.

Your machine performs water
softening depending on the
hardness level of the supply
water. Washing time can
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.

Pay attention not to open the
door of the machine when

C

C

Cancelling the programme

Open the door of the product Press
and hold the Programme Selection /
Programme Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.

C

Salt indicator ( )

Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt in
the dishwasher or not. You need to refill
the salt reservoir with salt whenever salt
indicator appears on the display of your
machine.

C

it is running. There may
be a rush of vapour when
you open the door of your
machine; be careful.

The machine will remain
silent in pause mode for
some time in order to remove
the water from the machine
and on the dishes completely
and to have the water
softener cleaned, and then it
will resume running in drying
mode.

There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on
the step the programme you
have cancelled was in.

Adjusting the water hardness
level is explained in Water
Softening System section.

Page 40 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Operating the product

Rinse Aid indicator ( )

Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears on
the display of your machine.

End of programme

When the programme you
have selected comes to an

C

End of Programme indicator will light up
when the washing programme is over.

1. Open the door of the machine.

2. Press On/Off key to turn off your

3. Close the tap.

4. Unplug the machine from the

C

C

end, an audible warning
signal will warn you to turn off
your machine. This audible
signal will warn you with
certain intervals before it
turns off.

machine.

socket.

For energy saving, the
machine is automatically
turned off following the
completion of the programme
or if the programme is not
started.

Leave your dishes in the
machine for about 15
minutes to allow them cool
down after they are washed.
Your dishes will dry in a
shorter time if you leave
the door of your machine
ajar during this period. This
process will increase the
drying effectiveness of your
machine.

Water cut-off warning

If mains water is cut or water inlet tap
is turned off the machine cannot take
water in and E:02 icon will flash on the
programme indicator. As long as the
problem continues, washing programme
is paused and the water inlet is checked
regularly by the machine; when
the water is restored E:02 icon will
disappear after a while and the washing
programme resumes.

Overowing warning

If the machine intakes too much
water or there is leakage at any of the
components then the machine will
detect this and E:01 icon will flash on
the Programme indicator. As long as the
overflowing continues safety algorithm
will be active and try to discharge the
water. If overflowing stops and safety
is assured, E:01 icon will disappear.
If E:01 does not disappear, there is
a permanent fault. In this case the
authorised service should be contacted.

InnerClean

This programme is recommended
to be operated on each 1-2 months
for machine cleaning and necessary
hygiene. The programme should be
operated while the machine is empty.
In order to achieve an efficient result, it
is recommended to use together with
special machine cleaning agents.

Do not use this programme to
clean dishes. As it operates

C

in high temperatures, it is
harmful for the dishes.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 41

MAINTENANCE AND CLEANING

6

Service life of the product extends and
frequently faced problems decrease if it
is cleaned at regular intervals.

Unplug the product and turn
off the tap before attempting

A

C
C

any cleaning procedures.

Do not use abrasive
substances for cleaning.

Clean the filter and impellers
at least once a week in order
for the machine operates
efficiently.

Cleaning the outer surface of
the product

Wipe the outer surface and door
gaskets of the product gently with a mild
cleaning material and damp cloth. Wipe
the "Control panel" only with a slightly
damp cloth.

Cleaning the interior of the
machine

• Clean the interior of the machine
and the tank by running a
programme with or without
detergent based on the degree of
soil.

• If water has remained in the
machine, drain the water by
performing the procedures under
the topic "Canceling a programme".
If the water cannot be discharged,
remove the filters as specified in
the "Cleaning the filters" section
and check if there are any leftover
deposits that have accumulated at
the bottom of the machine, blocking
the water path. Clean if necessary.

Cleaning the lters

Clean the filters at least once a week
in order for the machine operates
efficiently. Check if food residues are left
on the filters. If there are food residues
on filters, take them out and clean well
under running water.

1. Turn the micro filter (1) and coarse
filter (2) assembly counter clockwise
and pull it out from its seating.

2. Pull out the metal/plastic filter (3)
from the seating.

3. Press the two pawls on the coarse
filter inwards and separate the
coarse filter from the assembly.

Page 42 FIDWB14 60cm Fully Integrated Dishwasher Use r Manua l

Maintenance and cleaning

4. Clean all three filters under tap
water by means of a brush.

5. Place the metal/plastic filter.

6. Place the coarse filter into the micro
filter. Make sure that it is properly
seated. Turn the coarse filter
clockwise until a "click" sound is
heard.

Do not use the dishwasher

C

C

without filter.

Incorrect placement of the
filters will reduce washing
efficiency.

Cleaning the hose lter

Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of the
filter attached to the water inlet hose.
Check the filter and the hose regularly
and clean them if necessary.

1. Turn off the tap and remove the
hose.

2. After taking out the filter, clean it
under running tap water.

3. Place the cleaned filter back to its
seat in the hose.

4. Install the hose to tap.

(depends on model)

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 43

Maintenance and cleaning

Cleaning the impellers

Clean the impellers at least once a
week in order for the machine operates
efficiently.

Lower impeller

Check if the holes on the lower impeller
(1) are clogged. If they are clogged,
remove and clean the impeller. You can
pull the lower impeller up to remove it.

Upper impeller

Check if the holes on the upper impeller
(1) are clogged. If they are clogged,
remove and clean the impeller. Turn its
nut to left to remove the upper impeller.
Make sure that the nut is tightened well
when installing the upper impeller.

Page 44 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Maintenance and cleaning

Ceiling Impeller

Check if the holes on the top ceiling
impeller (1) of your machine are
clogged. If they are clogged, remove
and clean.
To remove them, slightly push them
upwards and then rotate to left.
To install the impeller, seat it into its
slot, push slightly upwards and turn it
rightwards until it is securely tightened.
When the impeller is released, check if
it rotates without any obstruction.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 45

7

TROUBLESHOOTING

Machine does not start.

• Power cable is unplugged. >>> Check if the power cable is plugged in.

• Fuse is blown. >>> Check the fuses in your house.

• Water is cut. >>> Make sure that the water inlet tap is open.

• Door of the machine is open. >>> Make sure that you have closed the door of
the machine.

• On / Off button is not pressed. >>> Make sure that you have turned on the
machine by pressing the On / Off button.

Dishes are not washed clean

• Dishes are not placed orderly in the machine. >>> Load the dishes as described
in the user manual.

• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.

• Impellers are stuck. >>> Prior to starting the programme, turn the lower and
upper impellers by hand to make sure that they rotate freely.

• Impeller holes are clogged. >>> Lower and upper impeller holes might be
clogged with food remnants such as lemon pips. Clean the impellers regularly
as illustrated in section “Cleaning and Care”.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.

• Filters are installed incorrectly. >>> Check the filter system and make sure that
it is installed correctly.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.

• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.

• Detergent is not sufficient. >>> If you are using powder detergent, adjust
the amount of detergent according to the soiling degree of your dishes and/
or programme definitions. We recommend you to use tablet detergents for
optimum results.

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid
in the machine.

• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser
lid is closed tightly after adding detergent.

Dishes are not dry at the end of cycle

• Dishes are not placed orderly in the machine. >>> Place your dishes in a way
that no water will accumulate in them.

Page 46 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Troubleshooting

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in
the machine.

• Machine is unloaded right after the programme is over. >>> Do not unload your
machine right after washing process is completed. Slightly open the door and
wait for evacuation of the steam inside for a while. Unload the dishes after the
pieces cool down to a touchable level. Start unloading process from the lower
basket. Thus, dropping of water remained on a piece at upper basket onto the
pieces at lower basket is prevented.

• Selected programme is unsuitable. >>> Since rinsing temperature is low at
programmes with short duration, drying performance will also be low. Select
programmes with longer duration for a higher drying performance.

• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained on kitchen utensils with deteriorated surfaces
and it is not suitable to use such utensils in terms of hygiene as well. Also, water
can not flow easily on deteriorated surfaces. It is not recommended to wash such
kitchen utensils in dishwasher.

C

Tea, cafe or lipstick stains remain on dishes.

• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.

• Surface quality of the kitchen utensils is deteriorated. >>> Tea and cafe stains or
other dye spots may not be cleaned in dishwasher when they have penetrated
in deteriorated surfaces. Desired washing performance can not be obtained
on kitchen utensils with deteriorated surfaces and it is not suitable to use such
utensils in terms of hygiene as well. It is not recommended to wash such kitchen
utensils in dishwasher.

• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.

Lime traces remain on dishes and glassware gains a misty appearance

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in
the machine.

• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.

• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Make sure that the salt reservoir lid is tightly closed after

It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface
tensions of Teflon and water are different, water droplets will remain as
beads on the Teflon surface.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 47

Troubleshooting

finishing the filling process. Run the prewash programme to remove the salt that
spilled inside the machine. Since the salt granules that will remain under the lid
will dissolve during prewash, causing the lid loosen, check the lid once again at
the end of the programme.

There is a different odour in the machine

A new machine has a peculiar odour. It will fade out after a couple of

C

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter

• Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going

Rust, discoloration or surface deterioration occurs on dishes

• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal

• Salty food remnants have remained on dishes for a long time. >>> If cutlery

• Electric installation is not grounded. >>>Check if your machine is connected to

• Intensive cleansers such as bleaches are used. >>> Protective cover on metal

• Metal items particularly such as knives are used for purposes other then their

• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is

• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust

washes.

system regularly as illustrated in section “Cleaning and Care”.

to start the machine right after you have put the dishes into it, remove the
remnants on the dishes and run the Prewash programme without detergent
every 2 days. In such cases, do not close the door of the machine completely
in order to avoid odour build up in machine. You can also use commercially
available odour removers or machine cleaners.

surfaces. Pay attention not to spill salt around the salt filling hole while adding
salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling
process. Run the prewash programme to remove the salt that spilled inside
the machine. Since the salt granules that will remain under the lid will dissolve
during prewash, causing the lid loosen, check the lid once again at the end of
the programme.

soiled with such foods will be kept waiting in machine, dirt must be removed by
prewash or dishes must be washed without being kept waiting.

the actual grounding line. Otherwise, the static electric created in the product
causes arcs on the surfaces of metal items creating pores, removing the
protective cover on the surface and causing discoloration.

surfaces gets damaged and looses its efficiency in time when it gets in contact
with cleansers such as bleach. Do not wash your dishes with bleach.

intended uses. >>> Protective cover on the edges of knives may get damaged
when they are used for purposes such as opening cans. Do not use metal
kitchen utensils out of their intended uses.

inevitable; they should not be washed in dishwashers.

on a corroded item can migrate to other stainless steel surfaces and cause
corrosion on those surfaces as well. Such items should not be washed in
dishwashers.

Page 48 FIDWB14 60cm Fully Integrated Dishwasher User Manual

Troubleshooting

Detergent remains in detergent dispenser.

• Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.

• Detergent is added long before the washing process. >>> Pay attention to add
detergent shortly before start-up of the washing.

• Opening of the detergent dispenser lid is prevented during washing. >>>
Place the dishes in a way that will not prevent the detergent dispenser lid from
opening and the water going into the machine from impellers.

• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.

• Impeller holes are clogged. >>> Lower and upper impeller holes might be
clogged with food remnants such as lemon pips. Clean the impellers regularly
as illustrated in section “Cleaning and Care”.

Decorations and ornaments on kitchen utensils are being erased.

C

Dishes are scratched.

C

• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Spilled salt can cause scratches. Make sure that the salt
reservoir lid is tightly closed after finishing the filling process. Run the prewash
programme to remove the salt that spilled inside the machine. Since the salt
granules that will remain under the lid will dissolve during prewash, causing the
lid loosen, check the lid once again at the end of the programme.

• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.

• Dishes are not placed orderly in the machine. >>> When placing the glasses
and other glassware into the basket lean them not against other dishes but the
edges or racks of the basket or the glass support tines. Striking of the glasses
to each other or to other dishes due to the impact of water during washing can
cause breaks, or scratches on their surfaces.

Decorated glasses and decorated lustre porcelains are not suitable
for washing in the dishwasher. Manufacturers of some glassware and
porcelain tableware items do not recommend washing such kitchen
utensils in the dishwashers either.

Kitchen utensils that contains or are made of aluminum should not be
washed in dishwasher.

FIDWB14 60cm Fully Integrated Dishwasher User Manual Page 49

Troubleshooting

A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.

• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse
aid when adding rinse aid.

• Corrosion has occurred on glass due to soft water. >>> Measure the hardness
of the supply water appropriately and check the water hardness setting. If
your supply water is soft (<5 dH), do not use salt. Choose programmes that
wash in higher temperatures (e.g. 60-65°C). You can also use glass protective
detergents that are commercially available.

Foam forms in the machine.

• Dishes are washed with hand-wash detergent by hand but not rinsed before
placing them into the machine. >>> Hand-wash detergents do not contain
antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Removing the coarse soil on the dishes under tap water, with a
tissue paper or fork will be sufficient.

• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care
that rinse aid is not spilled in the machine when you are filling it. Clean any
spilled rinse ait with the help of a tissue paper/towel.

• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse
aid reservoir is closed after adding rinse aid.

Kitchen utensils are broken.

• Dishes are not placed orderly in the machine. >>> Load the dishes as described
in the user manual.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.

Water remains in the dishwasher at the end of the programme.

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.

• Discharge hose is clogged/blocked. >>> Check the discharge hose. If
necessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.

C

If you cannot eliminate the problem although you follow the instructions
in this section, consult your dealer or the Authorised Service Agent.
Never try to repair a nonfunctional product yourself.

For all product enquiries (including warranty suppor t),

please contact our Customer Care team on

1800 444 357 or via email: [e-mail]