Holzhof MAX XM 100 RP line Assembly Instructions Manual
MAX XM 100 RP line
MAX XM 100 RP line MAX XM 100 RP line
MAX XM 100 RP line
assembly
assembly assembly
assembly
instructions
instructionsinstructions
instructions
ASSEMBLY SEQUENCE:
1. STRUTS AND PLATFORMS
2. ARCHWAYS
3. PARAPETS
4. SLIDE
5. RAMP
6. BENCH
7. ROOF
8. ATTACHED GYM
9. UNDERGROUND
LAYING/ANCHORAGE OF
THE STRUCTURE
NOTA BENE: i t is recommended to fix the bolts
definitivel y and only insert the caps o nce the
correct positioning of the elements has been
verified.
NOTE:
---- TTTThe colours and models in the
he colours and models in the he colours and models in the
he colours and models in the
image are purely indicative.
image are purely indicative.image are purely indicative.
image are purely indicative.
----
The platform can be in engineered wood or
The platform can be in engineered wood or The platform can be in engineered wood or
The platform can be in engineered wood or
wooden
wooden wooden
wooden planking
plankingplanking
planking....
Article
num.
fixing CODE N.
NAME
1
2 xpe11
Shaped PE n ut protection cap
2
2 xpe10
PE nut protection cap
3
4 xpe116
PE cap
4 4
_
ISO7089 Ø8 washer
5
2
_
UNI7473 M8 self-locking n ut
7
2
-
UNI4017
M8X155
HEX SCREW
NOTA BENE: it is recommended to fix the bolts definitively and only insert the caps o
NOTA BENE: it is recommended to fix the bolts definitively and only insert the caps oNOTA BENE: it is recommended to fix the bolts definitively and only insert the caps o
NOTA BENE: it is recommended to fix the bolts definitively and only insert the caps o
nce the correct
nce the correct nce the correct
nce the correct
positioning of the elements has been verified.
positioning of the elements has been verified.positioning of the elements has been verified.
positioning of the elements has been verified.
1. Position the archway between the struts and fix it by inserting: 1
1. Position the archway between the struts and fix it by inserting: 11. Position the archway between the struts and fix it by inserting: 1
1. Position the archway between the struts and fix it by inserting: 1 x M8 washer (3), 1
x M8 washer (3), 1x M8 washer (3), 1
x M8 washer (3), 1 x M8x260
x M8x260 x M8x260
x M8x260
TORX screw (2),
TORX screw (2),TORX screw (2),
TORX screw (2), 1111 x 025 mm. winged PE cap (1)
x 025 mm. winged PE cap (1)x 025 mm. winged PE cap (1)
x 025 mm. winged PE cap (1) into the upper part;
into the upper part;into the upper part;
into the upper part;
1 x PE nut protection cap (4
1 x PE nut protection cap (41 x PE nut protection cap (4
1 x PE nut protection cap (4), 1 x M8 washer (3),
), 1 x M8 washer (3),), 1 x M8 washer (3),
), 1 x M8 washer (3),
1 x M8x260 TORX screw (2), 1 x PE cap (5)
1 x M8x260 TORX screw (2), 1 x PE cap (5)1 x M8x260 TORX screw (2), 1 x PE cap (5)
1 x M8x260 TORX screw (2), 1 x PE cap (5) into the lower part.
into the lower part. into the lower part.
into the lower part.
2. Repeat the operation for the opposite
2. Repeat the operation for the opposite 2. Repeat the operation for the opposite
2. Repeat the operation for the opposite
side. Fix the other archways.
side. Fix the other archways.side. Fix the other archways.
side. Fix the other archways.
NOTA BENE:
NOTA BENE: NOTA BENE:
NOTA BENE: iiiit is recommended to fix
t is recommended to fix t is recommended to fix
t is recommended to fix
the bolts definitively and only insert the
the bolts definitively and only insert the the bolts definitively and only insert the
the bolts definitively and only insert the
caps once the corr
caps once the corrcaps once the corr
caps once the correct positioning of the
ect positioning of the ect positioning of the
ect positioning of the
elements has been verified.
elements has been verified.elements has been verified.
elements has been verified.
1. Position the PE parapet between the struts,
1. Position the PE parapet between the struts, 1. Position the PE parapet between the struts,
1. Position the PE parapet between the struts,
resting the two lower fixing wings on the
resting the two lower fixing wings on the resting the two lower fixing wings on the
resting the two lower fixing wings on the
platform and then fix using:
platform and then fix using:platform and then fix using:
platform and then fix using:
4 x M8 washer (3)
4 x M8 washer (3)4 x M8 washer (3)
4 x M8 washer (3)
4 x M8x80 TEL screw (2) WOOD
4 x M8x80 TEL screw (2) WOOD 4 x M8x80 TEL screw (2) WOOD
4 x M8x80 TEL screw (2) WOOD
4 x M6
4 x M64 x M6
4 x M6,,,,3x60 TEFR screw (2) AL
3x60 TEFR screw (2) AL3x60 TEFR screw (2) AL
3x60 TEFR screw (2) ALUMINIUM
UMINIUM UMINIUM
UMINIUM
4 x Ø25 winged PE cap
4 x Ø25 winged PE cap4 x Ø25 winged PE cap
4 x Ø25 winged PE cap
2. If necessary, repeat the operation on the other parapets.
2. If necessary, repeat the operation on the other parapets.2. If necessary, repeat the operation on the other parapets.
2. If necessary, repeat the operation on the other parapets.
Article
num.
Default/
Quantity
NAME
1
1
Tower
2
1
PE archway
3
1
Curved slide
4
4
IS07089 Ø8 washer
5
4
M8x1 80 T ORX screw
6
4
PE cap
1. A fter having fixed the PE archway (2), place the body of the
curved slide (3) on the platform of the tower (1) and insert
the bolts, necessary for fixing , into the holes pre sent on the
slide (3).
2. Check correct positioning, verticality and parallelism. Fix
the bolts definitively and position the caps.
3. Repeat the operati on also on th e other side o f the
slide.
NOTE: COLOURS AND MODELS
NOTE: COLOURS AND MODELS NOTE: COLOURS AND MODELS
NOTE: COLOURS AND MODELS
REPRESENTED ARE PURELY
REPRESENTED ARE PURELY REPRESENTED ARE PURELY
REPRESENTED ARE PURELY
INDICATIVE
INDICATIVEINDICATIVE
INDICATIVE
NOTA B E N E : it is recommended to fix the
bolts definitively and only insert the caps
once the correct positioning of the elements
has been verified.
1. Insert the (5) M8x70 threaded bars into the
bushes present on the (6) climbing board.
2. Attach the climbing board (6) by
introducing the threaded bars (5) into
the pre-drilled holes in the platform
frame; these were previously fixed by
inserting the PE nut protection cap (4),
M8 washer (3), M8 self-locking nut and
(2) and PE cap (1).
1)
1)1)
1) 2 x PE cap
2 x PE cap2 x PE cap
2 x PE cap
2)
2)2)
2) 2 x M8 self
2 x M8 self2 x M8 self
2 x M8 self----locking nuts
locking nutslocking nuts
locking nuts
3)
3)3)
3) 2 x M8 washer
2 x M8 washer2 x M8 washer
2 x M8 washer
4)
4)4)
4) 2 x PE nut protection cap
2 x PE nut protection cap2 x PE nut protection cap
2 x PE nut protection cap
5)
5)5)
5) 2 x M8x70 LG* threaded bar
2 x M8x70 LG* threaded bar2 x M8x70 LG* threaded bar
2 x M8x70 LG* threaded bar
6)
6)6)
6) 2 x M8x
2 x M8x2 x M8x
2 x M8x55550 AL* threaded bar
0 AL* threaded bar0 AL* threaded bar
0 AL* threaded bar
7)
7)7)
7) PE climbing boa
PE climbing boaPE climbing boa
PE climbing board
rdrd
rd
*LG: Wood
*AL: Aluminium
Loading...